| CVE-2026-13734 | Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer-state changes — update_peer_addr() (endpoint roaming update), the keypair->last_rx/peer->last_rx liveness timers, and keypair_update() (promote next→current and destroy the previous keypair) — and only afterward called wg_check_replay(). On a replayed packet the replay check returned -EINVAL, but none of the preceding mutations were rolled back.
The AEAD tag authenticates content but not freshness, so a replayed-but-authentic transport packet decrypts correctly. An attacker who captures one valid ciphertext off the wire (an on-path or shared-medium observer) can re-inject it from an arbitrary spoofed source address. Reaching the handler requires no credentials: it is driven directly from inbound UDP datagrams via the dispatch in subsys/net/lib/wireguard/wg.c.
Because the state mutations committed before the replay check, the replay repoints the peer endpoint to the attacker-chosen source address (roaming hijack), redirecting the victim's subsequent outbound tunnel traffic until the legitimate peer's next packet re-corrects it; it also prematurely destroys the previous keypair and refreshes the RX liveness timer. The tunnel payload stays encrypted under the session keypair, so this is an integrity/availability impact (traffic redirection and session disruption), not payload disclosure. The fix moves wg_check_replay() to immediately after a successful decrypt, before any peer-state mutation, matching the WireGuard specification and the Linux reference implementation. |
| CVE-2026-13735 | Zephyr's WireGuard implementation in subsys/net/lib/wireguard/wg_crypto.c mishandled keepalive packets. In wg_process_data_message(), any type-4 transport-data message whose payload was exactly 16 bytes (an empty plaintext plus a bare Poly1305 tag, i.e. a keepalive) was accepted and returned immediately, before wg_decrypt_packet() was ever called. The Poly1305 authentication tag was therefore never verified; the only preceding gates were a cleartext receiver-index lookup (get_peer_keypair_for_index() on the attacker-supplied data_hdr->receiver) and a non-cryptographic keypair validity/expiry check.
The path is reachable entirely from the network: inbound UDP on the WireGuard port is dispatched by wg_input() to handle_transport_data() and then wg_process_data_message(). The 32-bit receiver index is transmitted in cleartext in WireGuard handshake and data messages, so an on-path observer learns it directly and an off-path attacker can brute-force it against the UDP port. Given an active receiving-valid session for that index, an attacker could send a 16-byte garbage payload and have it accepted without possessing the session key.
On acceptance the unauthenticated message caused the management layer to observe a spoofed NET_EVENT_VPN_CONNECTED signal (setting peer->first_valid and notifying any net_mgmt listener) and incremented the keepalive-RX statistic. The impact is limited to integrity of this status signal: no plaintext is decrypted or injected, no key is disclosed, and the early-return path did not update the peer endpoint or liveness timers, so there is no traffic-injection, session-takeover, or availability consequence.
The fix removes the pre-decrypt early return so a 16-byte payload flows through wg_decrypt_packet(), which verifies the Poly1305 tag over the empty plaintext, followed by the existing anti-replay check; only an authenticated, non-replayed message is then recognised as a keepalive. Forged keepalives now fail the tag check and are counted as decrypt failures. |
| CVE-2026-15603 | morgan is an HTTP request logger middleware for Node.js. In versions prior to 1.12.0, the internal helper that escapes log token values did not neutralize the Unicode line separator characters U+0085 (Next Line), U+2028 (Line Separator), and U+2029 (Paragraph Separator). An unauthenticated remote client can place these characters in an attacker-controlled log token, for example a Basic auth username surfaced through the remote-user token, so that Unicode-aware downstream log processing splits a single request log into multiple logical records. This is a log forging issue (CWE-117) and an incomplete-fix follow-up to CVE-2026-5078, which only addressed ASCII control characters. The issue is fixed in morgan 1.12.0, which extends the escaping set to cover these Unicode line separators. Upgrade to morgan 1.12.0 to remediate. |
| CVE-2026-17203 | IBM Administration Runtime Expert for i 1R1M0 could allow a remote authenticated attacker to obtain sensitive information due to improper authentication enforcement. |
| CVE-2026-18545 | IBM Langflow OSS 1.0.0 through 1.11.1 is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| CVE-2026-18729 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote authenticated attacker to execute arbitrary code due to improper control of generation of code. |
| CVE-2026-18891 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote attacker to execute arbitrary flows and access sensitive information due to improper authentication. |
| CVE-2026-18899 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote attacker to read arbitrary files due to path traversal. |
| CVE-2026-18904 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote attacker to obtain sensitive information and inject unauthorized messages due to a namespace collision between user identifiers. |
| CVE-2026-18918 | In Eclipse Lyo versions 2.0.0 to 7.0.0, OAuth server authorization checks can be bypassed when the 2-legged auth is supported by the server. In those cases, application that based their authz filters upon Lyo-provided `AbstractAdapterCredentialsFilter`, are vulnerable. An attacked can create a provisional trusted client (valid use-case) but then it can be used as a trusted client immediately without requiring the administrator approval to clear the provisional status. The 3-legged path requiring user interaction is not vulnerable and rejects provisional clients. |
| CVE-2026-19286 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote attacker to execute arbitrary code due to improper enforcement of security restrictions on the A2A public endpoint. |
| CVE-2026-19294 | IBM Langflow OSS 1.0.0 through 1.11.1 could allow a remote authenticated attacker to execute and read any user's private flow due to improper authorization. |
| CVE-2026-19295 | IBM Langflow OSS 1.0.0 through 1.11.1 allows an authenticated attacker to execute arbitrary operating system commands in the server process by saving a flow with a crafted type field value and triggering a build of a wrapper flow that references it. This allowed privilege escalation from "authenticated flow user" to arbitrary OS-level command execution under the server process identity, bypassing the LANGFLOW_ALLOW_CUSTOM_COMPONENTS=false policy control. |
| CVE-2026-19412 | This vulnerability exists in the CP Plus CP-XR-DE21-S Router due to the presence of hardcoded HTTP Digest authentication credentials in the firmware that are identical across all devices running the affected firmware. An attacker with access to the local network could exploit this vulnerability by obtaining the hardcoded authentication information from the firmware.
Successful exploitation of this vulnerability could allow the attacker to gain unauthorized administrative access and perform privileged operations on the targeted device. |
| CVE-2026-33263 | When mail_max_userip_connections is set (default 10) and reached, submission-login can crash with epoll() panic caused by file descriptor handling issues. If running in high-security mode (default for community releases), only the new submission connection gets terminated. If running in high-performance mode (default for Pro releases), all connections handled by the submission-login process will be terminated. The crashes can cause failure for user to send a message, or it can cause duplicate messages to be sent. If TLS is not used (in the backend server processing the submission), duplicate deliveries cannot happen, because the crash can only happen at AUTH stage. Limit the number of connections handled by single submission-login process. This has a performance impact though. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-33604 | An attacker that can get Dovecot to relay a message, for example through Sieve redirect or submission relay, can use a crafted line ending in the message body to bypass the outbound protection that prevents message content from being interpreted as SMTP commands. A downstream mail server that hasn't yet fixed the SMTP smuggling vulnerability can be tricked into treating part of the message body as new SMTP commands, allowing injection of spoofed email. This is the same vulnerability class as CVE-2023-51764 and CVE-2023-51766. Where you control the receiving mail servers, ensure they reject bare carriage returns in message data. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-33605 | An unauthenticated attacker can crash the ManageSieve login process by sending a small malformed command before authenticating. If running in high-security mode (default for community releases), only the attacker's own connection is terminated. If running in high-performance mode (default for Pro releases), all connections handled by the same managesieve-login process are terminated. Repeating the attack can cause denial of service for Sieve script management. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-33606 | Mail content stored by a user can be crafted so that it is interpreted as dsync protocol commands when an administrator later runs dsync with the stream protocol, for example during a migration. Injected commands can modify mailbox state on the destination during migration or replication, including internal mailbox attributes that a user should not be able to set directly. It can also cause dsync errors. Avoid running dsync with the stream protocol on mailboxes with untrusted content. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-33607 | An attacker that has valid credentials can use IMAP LIST command to consume CPU. This can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage and kill the offending process and lock account. Alternatively install fixed version. No publicly available exploits are known. |
| CVE-2026-3686 | IBM Cloud Pak for Data System 11.3.0.2 through Interim Fix 001 is vulnerable to a denial of service due to improper limitation of resources. |
| CVE-2026-37236 | grpc-gateway v2.28.0 is vulnerable to Incorrect Access Control. The application processes the X-HTTP-Method-Override header in ServeMux.ServeHTTP without restricting allowed methods. When a POST request with Content-Type application/x-www-form-urlencoded includes this header, the request method is rewritten to an arbitrary attacker-supplied value before routing. This allows bypassing method-based access controls enforced by upstream proxies or WAFs. |
| CVE-2026-37237 | vLLM up to and including 0.17.0 allows remote attackers to cause a Denial of Service via memory exhaustion. The AsyncMediaIO.fetch_audio and AsyncMediaIO.fetch_image functions in multimodal/inputs.py fetch user-supplied media URLs using aiohttp and call r.read() without enforcing a maximum response size, allowing an attacker to exhaust server memory by providing a URL to an arbitrarily large file. |
| CVE-2026-37710 | Cross Site Scripting vulnerability in Omeka S v.4.2.0 allows a remote attacker to execute arbitrary code via the site navigation custom URL function |
| CVE-2026-37736 | An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| CVE-2026-38636 | An issue in the seekdir() function (/dirent/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| CVE-2026-38638 | An issue in the with_argv function (/unistd/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| CVE-2026-38819 | Multiple memory leaks in openNDS before 11.0.0 allow an unauthenticated attacker on the captive portal network to exhaust all available memory on the device within minutes. |
| CVE-2026-38820 | openNDS before 11.0.0 is susceptible to unauthenticated OS command execution via shell command injection through the fas query parameter on the /opennds_preauth/ endpoint because of libopennds.sh. |
| CVE-2026-38821 | A heap-based buffer overflow vulnerability exists in openNDS before 11.0.0 that allows an unauthenticated attacker on the captive portal network to crash the openNDS daemon (denial of service) and potentially achieve remote code execution. This is in http_microhttpd.c. |
| CVE-2026-38822 | In openNDS before 11.0.0, the client_params.sh script, invoked by the openNDS daemon to serve the authenticated client status page, is vulnerable to OS command injection through crafted HTTP GET query parameter keys. An authenticated captive portal user can inject arbitrary shell commands by embedding semicolons in a URL query parameter name. |
| CVE-2026-40013 | An attacker that has valid credentials can submit a Sieve script containing an extreme numeric literal, which causes an out-of-bounds write when the ManageSieve service compiles the script. This causes memory corruption and an observed crash of the ManageSieve process, resulting in denial of service for script management. This might be able to be used for remote code execution. Disable the ManageSieve service if users do not need remote Sieve script management. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40014 | An attacker that can send mail to a user can craft a message header that makes the IMAP THREAD command consume CPU disproportionate to the size of the message. When a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40015 | An attacker that has valid credentials can open many connections to the imap-hibernate service and send invalid commands, which can intermittently cause an out-of-bounds read and crash the process. The crash interrupts hibernated IMAP sessions handled by the affected process, which can cause degradation of service for IMAP. Disable IMAP hibernation. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40017 | An attacker that can send mail to a user can craft a message header whose values are chosen to collide in an internal hash table, which makes the IMAP THREAD command consume CPU disproportionate to the size of the message. This is a separate issue from CVE-2026-40014 and is not addressed by that fix. Whenever a mail client issues a THREAD command on the affected mailbox, this can cause degradation or denial of service for IMAP. Monitor system for abnormal CPU usage, kill the offending process and remove the offending message from the affected mailbox. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40018 | None None None No publicly available exploits are known. |
| CVE-2026-40019 | An unauthenticated attacker can send a truncated quoted argument to the ManageSieve login process, which makes it spin in an infinite loop consuming CPU. This can cause degradation or denial of service for Sieve script management, and repeated connections can consume all available CPU on the server. Monitor system for abnormal CPU usage and kill the offending process. Restrict network access to the ManageSieve service to trusted clients. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40203 | When IMAP compression is enabled, the same compression state is reused across responses in a session, so response sizes depend on both attacker-supplied mail and other mail in the same mailbox. An attacker that can send mail to a user and can also observe the sizes of that user's IMAP traffic can confirm whether the body of a small message matches a guessed text. Recovery of arbitrary unknown content was not demonstrated, but the attack can disclose whether a secret-like message body matches a candidate. Disable IMAP compression. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40204 | None None None No publicly available exploits are known. |
| CVE-2026-40205 | An attacker that holds an OAuth2 token granting only part of the required scopes can authenticate, because when more than one scope is required in the configuration, the remote token validation paths accept a token that carries only one of them, while the local token validation path correctly requires all of them. The configured authorization policy is not enforced, so a token that was granted only part of the required permissions is accepted where it should have been rejected. Use local token validation where tokens can be validated locally. Update to non-vulnerable version. No publicly available exploits are known. |
| CVE-2026-40541 | An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write arbitrary files and conduct denial-of-service attacks in DSM. |
| CVE-2026-50979 | A command injection vulnerability in the 'advanced/curl' component of Osbil Technology oPanel v1.19.50 and earlier allows authenticated attackers to execute arbitrary shell commands via the 'url' parameter |
| CVE-2026-50980 | Cross-Site Scripting (XSS) vulnerability in the DNS lookup/management component of oPanel before v1.20.25 allows remote attackers to execute arbitrary JavaScript and perform session hijacking via a crafted DNS TXT record |
| CVE-2026-51376 | An issue in BitChat for iOS v1.15.0 allows a remote attacker to cause a denial of service via an unauthenticated MESSAGE packet into the mesh gossip cache |
| CVE-2026-54788 | dd-trace-rs provides Datadog application performance monitoring for Rust. From 0.1.0 until 0.3.3, datadog-opentelemetry/src/propagation/tracecontext.rs parses the W3C tracestate header and collects every semicolon-separated key and value pair in the Datadog dd=... vendor entry into a HashMap without enforcing a pair count or entry size limit. Because tracecontext extraction is enabled by default, a remote unauthenticated attacker can send an arbitrarily large dd=... entry and force excessive CPU and memory consumption for each request, causing denial of service in an instrumented network service. This vulnerability is fixed in 0.3.3. |
| CVE-2026-55064 | Vikunja is an open-source self-hosted task management platform. From 2.3.0 until 2.4.0, a user with Write but not Admin permission on a shared child project can detach it from its parent hierarchy by submitting parent_project_id equal to 0 to POST /api/v1/projects/{project}. The Project.CanUpdate authorization check in pkg/models/project_permissions.go and UpdateProject logic in pkg/models/project.go only gate nonzero parent values, while UpdateProject always persists parent_project_id, so the explicit zero value bypasses the Admin requirement introduced for CVE-2026-35595. Detachment severs the recursive permission-inheritance chain and can disrupt the owner’s hierarchy and inherited collaborator access. This issue is fixed in version 2.4.0. |
| CVE-2026-55065 | Vikunja is an open-source self-hosted task management platform. From 0.24.6 until 2.4.0, DELETE /api/v1/projects/:project/views/:view permits an authenticated user to supply a view identifier from another project while authorizing only against an attacker-controlled project identifier. ProjectView.CanDelete in pkg/models/project_view_permissions.go does not establish that the view belongs to the path project, and ProjectView.Delete in pkg/models/project_view.go continues after the scoped project_views delete affects no rows. Its subsequent deletes select task_buckets and task_positions only by project_view_id, allowing cross-tenant destruction of Kanban assignments and ordering while leaving the victim view and tasks intact. This issue is fixed in version 2.4.0. |
| CVE-2026-55066 | Vikunja is an open-source self-hosted task management platform. Prior to 2.4.0, POST /api/v1/projects/{project}/views/{view}/buckets/{bucket}/tasks accepts a body supplied task_id but TaskBucket.CanUpdate in pkg/models/kanban_task_bucket.go authorizes only the project, view, and bucket from the URL. updateTaskBucket then calls Task.ReadOne without a separate task permission check, returns the victim task contents, and can update the task done state when the attacker chooses a done bucket. Because task identifiers are global sequential values, an authenticated user can enumerate cross-tenant tasks and modify their completion metadata through both the v1 and v2 routes that share this model. This issue is fixed in version 2.4.0. |
| CVE-2026-55067 | Vikunja is an open-source self-hosted task management platform. Prior to 2.4.0, POST /api/v1/projects/{project}/views/{view}/buckets/{bucket} allows the request body project_view_id value to be mass assigned by Bucket.Update in pkg/models/kanban.go. The permission check validates that the bucket currently belongs to the URL project and view but does not validate the body selected destination view, allowing any authenticated user to relocate an attacker-owned bucket into another tenant’s Kanban view. The injected bucket retains attacker-controlled content and ownership, enabling cross-tenant defacement. This issue is fixed in version 2.4.0. |
| CVE-2026-55068 | free5GC is an open-source implementation of the 5G core network. In 4.2.2 and earlier, the NRF RegisterNFInstance handler at PUT /nnrf-nfm/v1/nf-instances/{nfInstanceID} accepts NF Profiles without enforcing UUID format, nfStatus enum values, heartBeatTimer ranges, mandatory profile fields, or nfServices.ipEndPoints address constraints. The invalid profiles are persisted in the MongoDB NfProfile collection and returned by NFDiscover, allowing an attacker with SBI access to advertise attacker-controlled network-function endpoints and redirect control-plane signaling. This can expose credentials and signaling, alter service discovery integrity, and deny service across network functions that trust the NRF. This issue is fixed in version 4.2.3. |
| CVE-2026-55215 | MariaDB Connector/Node.js is used to connect applications developed on Node.js to MariaDB and MySQL databases. Prior to versions 3.3.3, 3.4.6, and 3.5.3, when ssl is enabled without a pinned CA or server certificate, MariaDB Connector/Node.js sends credentials before completing certificate fingerprint validation. In lib/cmd/handshake/auth/handshake.js, a server that selects mysql_clear_password as the initial authentication plugin can receive the password before the post-TLS identity check. In lib/cmd/handshake/authentication.js, an authentication switch can evaluate the previous plugin instead of the requested target plugin, allowing mysql_clear_password to send the credential first. An active man-in-the-middle can present a self-signed certificate, capture the database password, and use it to authenticate directly even though the connector later rejects the server and closes the connection. This issue is fixed in versions 3.3.3, 3.4.6, and 3.5.3. |
| CVE-2026-55245 | Bifrost is an enterprise AI gateway for routing requests to model providers. Prior to 1.5.17, the isPublicIP function in core/providers/utils/fetch.go, reached through FetchAndEncodeURL for Bedrock and Vertex image or document URLs, classifies Carrier-Grade NAT 100.64.0.0/10, IPv6 6to4 2002::/16, NAT64 64:ff9b::/96 and 64:ff9b:1::/48, and deprecated IPv6 site-local fec0::/10 addresses as public. A remote attacker who controls a multimodal request URL can make the gateway fetch internal services, including a cloud instance metadata endpoint encoded through 6to4 or NAT64. This issue is fixed in version 1.5.17. |
| CVE-2026-55247 | plone.app.event provides the event content type for Plone. Prior to versions 5.2.4 and 6.0.1, the iCalendar import in src/plone/app/event/ical/importer.py accepts insufficiently restricted calendar and event URLs, does not adequately bound downloaded bytes or imported events, and commits work per event. A logged-in editor can make the server request internal network resources or local calendar files, exhaust resources and take the site offline, and store a malicious event URL that executes script in another user's browser. The fix restricts accepted URLs, applies MAXIMUM_ICAL_IMPORT_SIZE_BYTES and MAXIMUM_ICAL_IMPORT_EVENTS limits, uses transaction savepoints, and validates event URLs. This issue is fixed in versions 5.2.4 and 6.0.1. |
| CVE-2026-55248 | plone.app.portlets provides portlets and a Plone-specific user interface for plone.portlets. Prior to 5.0.8, 6.0.4, and 7.0.2, a member who can add an RSS portlet can set its feed URL to a very large response, causing src/plone/app/portlets/portlets/rss.py to download and retain excessive data in memory and deny service. The same RSS URL handling accepts internal hosts, IP addresses, single-word domains, and explicit ports, allowing server-side requests that can probe internal network services and open ports. A malicious feed item can also supply a JavaScript URL that is retained as the item link and can execute script when used by a victim. The affected logic includes _rss_feed_url_validator, _normal_url_validator, RSSFeed._retrieveFeed, RSSFeed._buildItemDict, and the FEED_DATA in-memory cache. This issue is fixed in versions 5.0.8, 6.0.4, and 7.0.2. |
| CVE-2026-55425 | Graylog is a free and open log management platform. From 7.1.0 until 7.1.4 and 7.2.0-alpha.2, the System Catalog entity titles endpoint in graylog2-server/src/main/java/org/graylog2/rest/resources/system/contentpacks/titles/EntityTitleServiceImpl.java allows an authenticated user to request composite display fields without verifying that every selected field is readable. A user can retrieve protected values, including the password hash on a readable user record; ordinary users are limited to their own permitted records, while administrators can retrieve hashes for all users. This issue is fixed in versions 7.1.4 and 7.2.0-alpha.2. |
| CVE-2026-55484 | ALOS HTTP is a Linux-first Go web framework and application server built around a custom networking stack. Prior to 0.0.0-20260617230736-314b6783e196, core/utils.go::sanitizeRequestPath calls splitPathQuery on a request path beginning with a question mark and then performs the unchecked p[0] access without checking whether the resulting path is empty. An unauthenticated client can send a malformed request such as a question-mark-only path through h1_plain.go::ParseH1RequestHead, hpack.go::decodeSimpleGetPathHTTPSRequest, hpack.go::observeHeader, or h3_conn.go::handleRequestStream, causing an out-of-bounds panic before core.Recovery() middleware runs and terminating the server process. This issue is fixed in pseudo-version 0.0.0-20260617230736-314b6783e196. |
| CVE-2026-55485 | Piccolo Admin is an admin interface and content management system for Python, built on top of Piccolo. Prior to 1.14.0, piccolo_admin/endpoints.py uses superuser_validators to block PUT, PATCH, DELETE, and POST requests by non-superusers but permits GET requests to configured user and session tables, while piccolo_api/session_auth/tables.py exposes SessionsBase.token because the token column is not secret. In deployments that add the Sessions and User tables to create_admin, a non-superuser administrator can call GET /api/tables/sessions/, obtain another user's live session token, replay it as the Cookie id value to impersonate a superuser, and permanently set superuser to true on the attacker's own row. This issue is fixed in version 1.14.0. |
| CVE-2026-55511 | Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs allows a user with SystemPrivilege.ControlArchiving to create a double-quoted StreamSQL column name that is interpolated into generated Java source by Expression.fillCode_InputDefVars and Expression.sanitizeName. A sum aggregate reaches yamcs-core/src/main/java/org/yamcs/yarch/streamsql/CompilableAggregateExpression.java and yamcs-core/src/main/java/org/yamcs/yarch/streamsql/funct/SumExpression.java through SelectExpression.compile, where Janino SimpleCompiler.cook compiles the injected source. POST /api/archive/{instance}:executeSql can therefore execute arbitrary Java in the Yamcs server process, exposing mission data and credentials and permitting telemetry tampering or denial of service. This issue is fixed in versions 5.12.8 and 5.13.2. |
| CVE-2026-55521 | Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs omits authorization checks in IndexesApi.listPacketIndex, IndexesApi.listEventIndex, Cop1Api.disable, Cop1Api.resume, Cop1Api.initialize, Cop1Api.updateConfig, and TimeApi.setTime. An authenticated low-privilege user can read packet and event index metadata without ObjectPrivilegeType.ReadPacket, alter COP-1 link state without SystemPrivilege.ControlLinks, and manipulate simulation time. These operations can disclose telemetry metadata, disrupt telecommand handling, and affect system integrity and availability. This issue is fixed in versions 5.12.8 and 5.13.2. |
| CVE-2026-55545 | Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs WebSocket subscription handlers fail to enforce the privileges required by equivalent REST endpoints. PacketsApi.subscribePackets exposes the packets WebSocket topic without ObjectPrivilegeType.ReadPacket, ProcessingApi.subscribeAlgorithmStatus exposes the algorithm-status WebSocket topic without ObjectPrivilegeType.ReadAlgorithm, and MdbOverrideApi.subscribeMdbChanges exposes the mdb-changes WebSocket topic without SystemPrivilege.GetMissionDatabase. A low-privilege authenticated user can receive telemetry packets, algorithm status, and mission database change information outside the assigned authorization scope. This issue is fixed in versions 5.12.8 and 5.13.2. |
| CVE-2026-55547 | Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs omits SystemPrivilege.ControlAccess checks from IamApi.listRoles, IamApi.getRole, and IamApi.listPrivileges in yamcs-core/src/main/java/org/yamcs/http/api/IamApi.java. Any authenticated account can call GET /api/roles, GET /api/roles/{name}, and GET /api/privileges to enumerate available system privileges and configured role mappings. The disclosure reveals security configuration that can support targeted privilege-escalation attempts. This issue is fixed in versions 5.12.8 and 5.13.2. |
| CVE-2026-55549 | Yamcs is a mission control framework. Prior to 5.9.4, Yamcs reflects an attacker-controlled redirect_uri parameter from GET /auth/authorize into yamcs-core/src/main/resources/auth/templates/authorize.html without adequate HTML escaping by yamcs-core/src/main/java/org/yamcs/http/auth/AuthHandler.java and yamcs-core/src/main/java/org/yamcs/http/HandlerContext.java. A crafted authorization URL can execute JavaScript when opened by a Yamcs user. The script can access browser-held authentication material and transmit it to an attacker, enabling account compromise. This issue is fixed in version 5.9.4. |
| CVE-2026-55552 | Yamcs is a mission control framework. Prior to 5.11.13, Yamcs StaticFileHandler.locateFile resolves an unauthenticated request path without using Path.normalize and Path.toAbsolutePath to confirm that the absolute path remains within the configured staticRoots. A path containing traversal segments can escape the intended web root and return an arbitrary readable host file. The flaw is in yamcs-core/src/main/java/org/yamcs/http/StaticFileHandler.java and can disclose sensitive operating-system and application data. This issue is fixed in version 5.11.13, and the 5.12 line is fixed from version 5.12.0. |
| CVE-2026-55559 | Yamcs is a mission control framework. Prior to 5.12.8 and 5.13.2, Yamcs inserts templateArgs from POST /api/instances and PATCH /api/instances/{instance} into YAML through VarStatement.append in yamcs-core/src/main/java/org/yamcs/templating/VarStatement.java without YAML-context escaping. The rendered configuration is parsed by YamcsServer.createInstance and loaded by YamcsServerInstance, allowing an attacker to inject a services entry for org.yamcs.ProcessRunner. Deployments without security.yaml expose the operation through the guest superuser, while secured deployments require SystemPrivilege.CreateInstances. Successful exploitation executes commands as the Yamcs service account. This issue is fixed in versions 5.12.8 and 5.13.2. |
| CVE-2026-55584 | phpSysInfo is a customizable PHP script that displays system information. Prior to 3.4.6, the PSI_ALLOWED access-control check in read_config.php trusts attacker-controlled X-Forwarded-For and Client-IP HTTP headers before REMOTE_ADDR. A remote unauthenticated attacker can supply an allowed address in one of these headers to impersonate a trusted client and access exposed hostname, kernel, CPU, memory, filesystem, and network-interface information. This issue is fixed in version 3.4.6. |
| CVE-2026-55673 | PowSyBl (Power System Blocks) is a framework to build power system oriented software. Prior to 7.2.2, UnixLocalCommandExecutor and WindowsLocalCommandExecutor concatenate command arguments and environment variables into strings interpreted through bash -c or cmd /c without sufficient escaping. Attacker-controlled values reaching UnixLocalCommandExecutor.execute, WindowsLocalCommandExecutor.execute, LocalComputationManager.execute, ParallelLoadFlowActionSimulator.run, ActionSimulatorTool.run, AmplModelRunner.run, or AmplModelRunner.runAsync can break out of the intended command and execute arbitrary shell commands as the JVM user. The affected itools paths include action-simulator with task-count, security-analysis with external, and dynamic-security-analysis. Downstream CLI tools, libraries, REST front ends, and multi-tenant grid-analysis services that forward less-trusted contingency identifiers or computation parameters into these APIs can expose the injection remotely. This issue is fixed in version 7.2.2. |
| CVE-2026-55678 | Arc is an open, SQL-native time-series database for telemetry. From 26.02.1 until 26.06.2, Arc Enterprise clustering accepts cluster join requests without authentication when cluster.enabled is true but cluster.shared_secret is not configured. The defaults in internal/config/config.go set cluster.enabled to false, cluster.cluster_name to arc-cluster, cluster.coordinator_addr to :9100, cluster.shared_secret to an empty value, and cluster.tls_enabled to false, while cmd/arc/main.go requires cluster.shared_secret only when cluster.replication_enabled is true. JoinRequest in internal/cluster/protocol/messages.go accepts attacker-controlled node_id, role, raft_addr, api_addr, and coord_addr values, plus optional auth_nonce, auth_timestamp, and auth_hmac fields. The join path in internal/cluster/coordinator.go validates HMAC authentication only when the configured shared secret is non-empty and otherwise proceeds after only the cluster-name check. An accepted node is marked healthy, added as a Raft voter or registered locally, and becomes available through internal/cluster/registry.go to the routing logic in internal/cluster/router.go. The forwardRequest path in internal/cluster/router.go builds its target from node.APIAddress and copies Authorization and x-api-key headers with the request, so a rogue node selected for a forwarded query or write can receive authentication headers, request bodies, database and measurement names, and operational metadata. Heartbeat in internal/cluster/protocol/messages.go also lacks HMAC fields, and internal/cluster/coordinator.go updates node state from supplied node_id and state values without authentication. An unauthenticated network attacker who can reach the coordinator port and knows the cluster name can therefore become a trusted cluster node, mutate cluster membership, be submitted as a Raft voter, intercept topology-dependent forwarded requests, divert or forge operations, and blackhole or delay traffic. The default standalone configuration is not reachable because cluster.enabled is false, but Enterprise cluster deployments with clustering enabled and no shared secret are affected. This issue is fixed in version 26.06.2. |
| CVE-2026-55763 | Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, processPercentageRoyaltiesTransfer in core/kapp/accounts/accounts.go calls SubFromBalance after the split loop and after the royaltiesToPay <= 0 early return. computeSplitRoyalties rejects only when splitToPay > royaltiesToPay, so a valid PercentTransferPercentage = 10000 split consumes exactly 100 percent of the royalty pool, sets royaltiesToPay to zero, and returns before the source account is debited. The split recipient receives the full royaltyAmount while the sender pays nothing and the supply counter is not updated, allowing unbounded off-the-books inflation of the transferred KDA. A KDA owner must configure a TransferPercentage royalty with a 100 percent split, after which any holder's transfer of the asset triggers the mint; the sibling processFixedRoyaltiesTransfer path is not affected because it debits the source before distribution. This issue is fixed in version 1.7.19. |
| CVE-2026-55764 | Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.19, Klever-Go allows a mint-role holder to bypass a finite per-nonce MaxSupply on the semi-fungible token add-quantity path. In core/kapp/systemAccount/systemAcount.go, SFTAddCirculation performed meta.Circulation += amount before evaluating whether Circulation exceeded MaxSupply, without checking for signed int64 overflow. A large positive raw Amount supplied through processSemiFungibleAddQuantity in core/kapp/kda/mint.go can wrap Circulation negative, causing the signed maximum-supply comparison to pass and crediting approximately MaxInt64 units while corrupting the on-chain counter. The fungible path is not affected because its MintedValue <= 0 guard detects the overflow. The correction uses the consensus activation flag FixMarketBuyOverflow. This issue is fixed in version 1.7.19. |
| CVE-2026-55784 | free5GC is an open-source implementation of the 5G core network. In version 1.4.4 and earlier, the AUSF component stores per-subscriber authentication state in a global sync.Map named AUSFContext.UePool in internal/context/context.go, keyed only by SUPI. Every request handled by internal/sbi/processor/ue_authentication.go creates an AusfUeContext, and AddAusfUeContextToPool executes ausfContext.UePool.Store(ausfUeContext.Supi, ausfUeContext), unconditionally replacing the active context for that SUPI. An attacker with access to the AUSF SBI/N12 interface can send concurrent POST /nausf-auth/v1/ue-authentications requests for the same target SUPI, causing all attempts to share one logical authentication context URL while K_aut, XRES, and EapID are repeatedly overwritten. A valid EAP-AKA' response for an earlier challenge is then checked against the latest context, causing AT_MAC verification to fail and denying authentication to the selected subscriber while the request flood continues. No fixed version is available as of this review. |
| CVE-2026-55834 | Pocket ID is an OIDC provider that allows users to authenticate with their passkeys to services. From 2.6.0 until 2.9.0, frontend/src/routes/authorize/+page.ts reads the redirect_uri query parameter and frontend/src/routes/authorize/+page.svelte uses the raw callbackURL in redirectWithError when prompt=none cannot complete silent authorization. The client-side path only blocks javascript and data schemes and does not invoke the backend callback allow-list validation, so an unauthenticated attacker who knows a valid client_id can redirect a victim browser to an arbitrary HTTP or HTTPS origin for phishing or OIDC error and state smuggling. This issue is fixed in version 2.9.0. |
| CVE-2026-56854 | The source-address critical option in the Permissions returned by an authentication callback was only enforced for the PublicKeyCallback and VerifiedPublicKeyCallback paths, extending the fix for CVE-2026-46595. Permissions returned by the PasswordCallback, KeyboardInteractiveCallback, NoClientAuthCallback, and GSSAPIWithMICConfig.AllowLogin callbacks were not validated against the client's remote address, so a source-address restriction set by those callbacks was silently ignored. The check is now applied to the Permissions returned by any authentication callback. |
| CVE-2026-58106 | CVE-2025-40843 https://github.com/advisories/GHSA-5xf2-f6ch-6p8r was fixed by replacing unchecked strcpy() with a bounded safe_strcpy() helper.
At ldlogger-tool-gcc.c:129 the destination passed to that helper is fullPath + 2, but the size
passed down is the full PATH_MAX. safe_strcpy() is strncpy(), which NUL-pads the
destination out to the whole n, so this site writes 4096 bytes into the 4094 that remain — a
2-byte stack overflow on every invocation, independent of the input path's length.
This issue affects CodeChecker: through 6.28.2. |
| CVE-2026-58107 | CodeChecker's massStoreRun processing path performs one-shot decompression of attacker-controlled, Base64-encoded zlib data without enforcing a maximum decompressed size.
An authenticated user with permission to store analysis runs can submit a highly compressed payload that expands to a significantly larger byte sequence. Because the entire decompressed output is materialized in memory before being written to a temporary file, a sufficiently large payload may exhaust process or host memory and consume substantial disk space, resulting in denial of service. |
| CVE-2026-58616 | Concurrent execution using shared resource with improper synchronization ('race condition') in Copilot Chat (Microsoft Edge) allows an authorized attacker to disclose information over a network. |
| CVE-2026-5953 | Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Ceviz Informatics Inc. Web Design allows Reflected XSS.
This issue affects Web Design: through 25082026. |
| CVE-2026-70331 | Improper neutralization of input used for llm prompting in Microsoft Edge for iOS allows an unauthorized attacker to perform spoofing over a network. |
| CVE-2026-75486 | Synk Sweater Comb before 3.8.8 contains a command injection vulnerability that allows an attacker who controls the .vervet.yaml configuration file to execute arbitrary OS commands by injecting malicious input into the linters.<key>.optic-ci.original branch name field. The expectGitBranch() function in src/lint.ts passes the unsanitized branch name directly into child_process.exec() via an unescaped template literal, enabling arbitrary command execution when the lint command is run against the repository. |
| CVE-2026-75758 | Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory.
Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape.
Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs.
This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4. |
| CVE-2026-76650 | A NULL
pointer dereference vulnerability exists in TL-WR841N v14 in the UPnP service when processing
SOAP state variable query requests. A specially crafted SOAP query may trigger
unexpected termination or instability of the process hosting the UPnP service.
Successful
exploitation may result in a denial-of-service condition affecting UPnP
discovery, state query, or related management functionality until the affected
process is restarted or the device is rebooted. |
| CVE-2026-76651 | A buffer
overflow vulnerability exists in the embedded HTTP service in TL-WR841N v14 when processing
multipart/form-data requests. Insufficient validation of an attacker-controlled
boundary parameter may allow a remote unauthenticated attacker to submit a
crafted request that corrupts memory by overwriting data beyond the bounds of
an internal buffer.
Successful
exploitation may result in modification or corruption of process memory,
potentially leading to undefined application behavior. Arbitrary code
execution, information disclosure, and denial-of-service conditions have not
been demonstrated. |
| CVE-2026-77184 | In MongoDB Connector for BI, the description text of a collection's JSON schema validator is incorporated into the comment text of the DDL returned by SHOW CREATE statements without complete escaping of backslash characters. A user with permission to modify a collection's schema validator, in deployments configured to build their SQL schema from those validators, can cause additional SQL text to be embedded in that generated output. If an operator or automated tool later replays that generated statement against a SQL server, the additional text is executed with the privileges of that session. |
| CVE-2026-77217 | PLANET GS-4210-16P2S firmware before 3.441b260626 contains authenticated stack buffer overflow and null pointer dereference vulnerabilities in /cgi-bin/dispatcher.cgi. The web_radiusSrv*_post family of handlers copies the radKey, radKey_0, radDftParamKey, radName, and radIp POST parameters into fixed-size stack buffers without length validation, and additionally dereferences radName and radIp without verifying their presence in the request. A remote authenticated attacker can send crafted requests to crash the CGI process or web management service, resulting in denial of service. |
| CVE-2026-77218 | PLANET GS-4210-16P2S firmware before 3.441b260626 contains authenticated stack buffer overflow vulnerabilities in /cgi-bin/dispatcher.cgi. The web_login_first_post handler copies the usrPass POST parameter into a fixed-size stack buffer without length validation, the web_sys_enablePasswd_post handler copies the enbPass POST parameter into a fixed-size stack buffer without length validation, and the web_sys_localUser_post handler copies the usrName and usrPass POST parameters into fixed-size stack buffers without length validation. A remote authenticated attacker can send a crafted request to crash the CGI process or web management service, resulting in denial of service. |
| CVE-2026-77586 | In MongoDB Connector for BI, MongoDB object names such as collection, field, and index names are placed into the quoted identifiers of the DDL text returned by SHOW CREATE statements without escaping the identifier delimiter. A user with permission to write to a sampled MongoDB collection can choose a name that closes the quoted identifier early, so that additional SQL text becomes part of the generated output. If an operator or automated tool later replays that generated statement against a SQL server, the additional text is executed with the privileges of that session. |
| CVE-2026-77939 | Flextype CMS through v1.0.0-dev contains an expression language injection vulnerability that allows authenticated attackers with a valid API token to read arbitrary files by passing unsanitized user-supplied input to the Symfony ExpressionLanguage engine via the POST /api/v1/query endpoint. Attackers can leverage exposed application objects including filesystem() and serializers() within the evaluation scope to read arbitrary server files and achieve conditional remote code execution if a PHP file can be placed on disk through a secondary vector. |
| CVE-2026-78238 | SOY Gallery contains a cross-site scripting vulnerability. An arbitrary script may be executed on the web browser of the user who is logging in to the product. |
| CVE-2026-81019 | wolfProvider before 1.2.2 generates the 8-byte explicit AES-GCM nonce once when the TLS write key is set and never increments it per record. As a result every TLS 1.2 and DTLS 1.2 AES-GCM record within a connection is encrypted under an identical key and nonce pair. Reusing a GCM key and nonce discloses the keystream (the XOR of two ciphertexts equals the XOR of their plaintexts, so one known record recovers the others) and leaks the GHASH authentication key, enabling authentication tag forgery. AES-CCM, TLS 1.3, and non-TLS use of the cipher are not affected. |
| CVE-2026-81020 | wolfEngine before 1.4.1 generates the 8-byte explicit AES-GCM nonce once when the TLS write key is set and never increments it per record. As a result every TLS 1.2 and DTLS 1.2 AES-GCM record within a connection is encrypted under an identical key and nonce pair. Reusing a GCM key and nonce discloses the keystream (the XOR of two ciphertexts equals the XOR of their plaintexts, so one known record recovers the others) and leaks the GHASH authentication key, enabling authentication tag forgery. AES-CCM, TLS 1.3, and non-TLS use of the cipher are not affected. |
| CVE-2026-81284 | Contributor Broken Access Control in ACF Extended <= 0.9.2.6 versions. |
| CVE-2026-81285 | Unauthenticated Denial of Service Attack in Smush Image Compression and Optimization <= 4.2.0 versions. |
| CVE-2026-81299 | Subscriber Insecure Direct Object References (IDOR) in WP Job Portal <= 2.5.9 versions. |
| CVE-2026-81341 | wolfEngine before 1.4.1 sources the explicit AES-CCM nonce for TLS 1.2 and DTLS 1.2 records from the record input buffer instead of the TLS sequence number carried in the additional authenticated data. Because the record layer leaves the explicit-nonce field for the cipher to populate, the value read is constant across records, so every AES-CCM record within a connection is encrypted under an identical key and nonce pair. Reusing a CCM key and nonce weakens confidentiality (identical keystream across records, so a known record recovers the others) and integrity (authentication tag forgery). Only wolfEngine is affected; wolfProvider is not. AES-GCM under wolfEngine is tracked separately. AES-CCM cipher suites are not enabled by default and must be explicitly selected, which limits exposure. TLS 1.3 and non-TLS use of the cipher are not affected. |
| CVE-2026-81517 | An unauthenticated party able to reach the port of a MongoDB Connector for BI (mongosqld) instance may generate enough routine connection log activity to exhaust the storage backing the configured log path. When a log write or log rotation operation subsequently fails, the resulting error is not handled and the shared mongosqld process ends, ending service for all connected SQL clients. The process continues to end on startup until an operator restores available storage, and the diagnostic message explaining the condition is not recorded. |
| CVE-2026-81518 | When mongosqld is configured with a client certificate authority file, the listener requests a client certificate during the TLS handshake but does not require one, so a client that presents no certificate is still accepted. In deployments that rely on client certificates as the sole means of identifying users, a remote party with network access to the listener can therefore establish a session and read the MongoDB data exposed through the connector. |
| CVE-2026-81578 | An improper access control vulnerability exists in the web management interface of PaperCut MF and PaperCut NG. Under specific conditions, unauthenticated remote requests targeting administrative functions can trigger backend actions prior to the completion of access validation checks. This allows an unauthenticated remote attacker to modify certain system configurations. |
| CVE-2026-81757 | Author Remote Code Execution (RCE) in Rank Math SEO <= 1.0.276 versions. |
| CVE-2026-81759 | Contributor Broken Access Control in WpEvently <= 5.5.0 versions. |
| CVE-2026-81760 | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Crocoblock JetEngine allows Reflected XSS.
This issue affects JetEngine: from n/a through 3.8.14.2. |
| CVE-2026-81761 | Subscriber Broken Access Control in WpEvently <= 5.5.0 versions. |
| CVE-2026-81767 | Unauthenticated Broken Access Control in Simple Payment <= 2.5.2 versions. |
| CVE-2026-81849 | Improper limitation of a pathname to a restricted directory in the aws:downloadContent plugin in amazon-ssm-agent before 3.3.4515.0 might allow an authenticated remote user whose ssm:SendCommand permission is restricted to the AWS-DownloadContent document, to write arbitrary files outside the intended download directory with root privileges, via crafted object keys in the S3 source the document is directed to retrieve. This issue may lead to arbitrary code execution as root if specific sensitive files are overwritten.
To remediate this issue, customers should upgrade amazon-ssm-agent to version 3.3.4515.0 or later. |
| CVE-2026-9491 | A server-ide request forgery (SSRF) vulnerability in webhook in Synology Chat Server before 2.4.5-22148 allows remote authenticated users to obtain non-sensitive information. |
| CVE-2026-9548 | An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM. |
| CVE-2026-82364 | A security vulnerability has been detected in macrozheng mall up to 1.0.3. This impacts an unknown function of the file /order/submit of the component Order Submission. The manipulation leads to race condition. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The vendor deleted the GitHub issue for this vulnerability without and explanation. |
| CVE-2026-82450 | BookStack before 26.05.4 contains a remote code execution vulnerability in the portable ZIP import functionality that allows users with Import Content and Create Books permissions to upload a PHP polyglot file as a book cover. Attackers can bypass image extension validation by embedding a PHP file with a .php filename in the ZIP archive, which is stored in the public web root and executed by unauthenticated requests. |
| CVE-2026-82451 | Formwork through 2.3.14 contains a stored cross-site scripting vulnerability in visit tracking that records the Referer header host unescaped. Unauthenticated attackers can craft malicious Referer headers to inject markup that executes in administrator browsers when viewing the Statistics panel. |
| CVE-2026-82452 | rust-iot-platform through commit 5df942ab contains an authentication bypass vulnerability where most REST API routes lack authentication guards in their handler signatures. Unauthenticated attackers can create, update, list, retrieve, and delete user accounts by directly accessing unprotected endpoints without providing valid credentials. |
| CVE-2026-82453 | rust-iot-platform through commit 5df942ab stores user passwords in cleartext without hashing in the user model. Attackers can read API responses from user retrieval and listing routes to obtain plaintext credentials for all accounts. |
| CVE-2026-82454 | The Omnivore API (packages/api) before the fix in commit abf53d6 contains an authentication bypass in Apple sign-in token verification. The decodeAppleToken function extracted the 'alg' field from the attacker-supplied JWT header and passed it as the sole allowed algorithm to jwt.verify(). Using jsonwebtoken v8 (which does not validate key/algorithm compatibility), an attacker can set alg=HS256 and sign a forged token using Apple's publicly available RSA public key as the HMAC secret, bypassing signature verification and impersonating any Apple-linked account. |
| CVE-2026-82455 | RubyGems fails to re-validate path containment after filesystem symlink resolution during gem extraction. When a pre-existing symlink inside the destination directory points outside the extraction root, extracted files that appear to be written under the destination directory can instead be written outside of it, breaking the extraction safety boundary. The fix resolves the real path of the parent directory before writing and raises Gem::Package::PathError if it escapes the destination directory. |
| CVE-2026-82456 | argocd-mcp 0.8.0 binds its HTTP transport to every network interface and accepts MCP sessions without requiring caller credentials when ARGOCD_API_TOKEN is configured. Attackers who can reach the listener can invoke the full tool surface using the operator's stored token to create applications, request syncs, and modify Argo CD resources. |
| CVE-2026-82457 | su-exec through 0.3 fails to validate numeric user and group identifiers parsed with strtol before assigning to uid_t and gid_t, allowing truncation of out-of-range values to zero. Attackers can supply large numeric identifiers that truncate to root's identifier, causing su-exec to execute target programs with root privileges instead of intended unprivileged accounts. |
| CVE-2026-82460 | Cloud Commander before 19.20.2 contains a directory traversal vulnerability in REST file-operation and markdown endpoints that fails to properly validate path normalization. Attackers can use path traversal sequences to read, write, move, or copy files outside the configured root directory. |
| CVE-2026-82461 | pac4j-oidc before 6.5.6 fails to verify access token signatures, issuers, audiences, or expiry when extracting Keycloak realm and client roles. Attackers can forge access tokens with administrative roles paired with valid ID tokens to bypass authorization checks in applications relying on pac4j role validation. |
| CVE-2026-82462 | pac4j-oidc before 6.5.6 accepts OIDC callbacks carrying only an access token without authorization code or ID token validation. Attackers can substitute access tokens minted for other clients to create authenticated sessions without proper issuer, audience, nonce, or subject verification. |
| CVE-2026-82463 | pac4j-core before 6.5.6 contains an authentication bypass vulnerability in CheckProfileTypeAuthorizer that reverses the profile type validation logic. Attackers can authenticate through a weaker client and access resources requiring a stronger profile type by satisfying generic profile checks. |
| CVE-2026-82464 | pac4j-core before 6.5.6 contains an open redirect vulnerability in DefaultLogoutLogic.perform() that accepts backslash-prefixed logout redirect targets matching logoutUrlPattern. Attackers can craft logout links with backslash-prefixed external hosts that browsers normalize into network-path references, redirecting victims to attacker-controlled sites after logout. |
| CVE-2026-82465 | pac4j-saml before 6.5.6 does not require signature validation of SAML LogoutRequest messages in SAML2LogoutValidator.validateLogoutRequest(). When an IdP sends no SessionIndex, a session can be destroyed based solely on the NameID, allowing an unauthenticated attacker to submit an unsigned LogoutRequest with a guessed identifier (e.g., an email address used as NameID) to terminate a victim's SAML session. |
| CVE-2026-82466 | Rodauth before 2.46.0 contains an authentication bypass vulnerability in the webauthn_login route that allows logged-in users to authenticate as any other account. Attackers can exploit improper account resolution logic that falls back to session account identifiers instead of validating the credential binding to complete authentication as arbitrary users. |
| CVE-2026-82467 | Rodauth before 2.47.0 fails to validate protocol-relative return-to paths in confirm_password, login_return_to_requested_location, and two_factor_auth_return_to_requested_location features. Attackers can craft paths with leading double slashes that browsers resolve as protocol-relative URLs, redirecting authenticated users to attacker-controlled sites after login or password confirmation. |
| CVE-2026-82468 | Rodauth before 2.47.0 contains a cross-site request forgery protection bypass vulnerability in the JSON request content type validation. Attackers can craft cross-origin form posts with content types containing application/json substrings to bypass CSRF token validation and force victims to authenticate to attacker-controlled accounts. |
| CVE-2026-82469 | Rodauth before 2.47.0 contains an authentication bypass vulnerability in the jwt_refresh route that issues new JWT access tokens without requiring a refresh token. Attackers can present an access token to the refresh route via non-POST methods to obtain a new valid access token, enabling indefinite account access with temporary token possession. |
| CVE-2026-82470 | Rodauth before 2.47.0 contains a time-based one-time password reuse vulnerability in the otp feature that fails to track the last accepted code timestamp. Attackers who observe a valid TOTP code can replay it during the drift window to bypass the second authentication factor. |
| CVE-2026-82472 | Documenso before 2.13.0 accepts PDF file uploads on the /api/files/upload-pdf endpoint without requiring authentication, session tokens, or API credentials. Unauthenticated attackers can upload arbitrary PDF files indefinitely to exhaust storage resources or fill the database with unlinked document records. |
| CVE-2026-82473 | KubeEdge CloudCore through 1.23.1 accepts node task status reports on its HTTPS server without authentication verification. Attackers can reach CloudCore on port 10002 to mark upgrade jobs as succeeded or failed, deceiving the control plane about node upgrade status and blocking further upgrade scheduling. |
| CVE-2026-82474 | Sudo through 1.9.17p2 fails to apply intercept policy checks to the execveat system call in ptrace-based intercept mode. Users permitted to run specific commands can execute denied programs by calling execveat directly or through fexecve, bypassing policy enforcement and logging. |
| CVE-2026-82475 | iFlytek astron-agent through 1.1.1 contains an authorization bypass vulnerability in the copyFlow endpoint that fails to validate workflow ownership. Authenticated attackers can enumerate workflow identifiers and overwrite other tenants' workflows or copy private workflows to read their definitions. |
| CVE-2026-82476 | Memos through 0.30.0 omits the 100.64.0.0/10 carrier-grade NAT address range from SSRF protection in its link-metadata fetcher, allowing unauthenticated attackers to bypass IP validation. Attackers can make the server request internal hosts in that range including cloud metadata services and read page titles and descriptions back. |
| CVE-2026-75759 | Improper Verification of Cryptographic Signature vulnerability in erlef oidcc allows an unauthenticated attacker to impersonate an arbitrary user via an encrypted ID token or JARM response carrying no nested signature. OpenID Connect Core 1.0 section 2 requires that an encrypted ID token be signed then encrypted, with the result being a Nested JWT, and JARM processing rule 5 requires the client to check the signature unconditionally. oidcc instead accepted a JWE wrapping unsigned claims as fully validated, so anyone holding the relying party's public encryption key could mint a token with an arbitrary sub, iss, and aud without possessing the provider's signing key.
In oidcc_jwt_util:verify_decrypted_token/4, a decrypted payload that is not a signed JWS fell back to parsing the plaintext claims and returning them with no verifying key. oidcc_token:int_validate_jwt/4 then matched on the JOSE structure type rather than on whether a signature had been verified, and returned success. The JARM path in oidcc_token:validate_jarm/3 is reachable through the browser front channel. UserInfo responses are not affected, because OpenID Connect Core 1.0 section 5.3.2 permits them to be encrypted without also being signed.
This issue affects oidcc: from 3.2.0-beta.1 before 3.9.0. |
| CVE-2026-77454 | Incorrect Authorization vulnerability in ash-project ash_sql allows a caller to bypass a scoping or authorization filter expressed as exists/2 over a relationship that declares both a limit (or from_many?) and a parent(...)-referencing filter or sort.
AshSql.Join.related_query/3 skips the caller-supplied exists predicate for such relationships and delegates it to limit_from_many/5. When the relationship's own filter or sort references parent(...), limit_from_many/5 takes a branch that drops both the limit and the predicate, emitting a bare correlated EXISTS with no predicate. The check then matches any record that has any related row. Most severely, when the expression backs a policy (for example authorize_if expr(exists(memberships, user_id == ^actor(:id)))), the actor-scoping condition disappears and the policy passes for any actor with any related row.
This issue affects ash_sql: from 0.4.1 before 0.7.1. |
| CVE-2026-78228 | Uncontrolled Recursion vulnerability in ash-project ash_oban allows a user who can drive a trigger's on_error action to fail on the final attempt to exhaust worker CPU and memory, denying service.
The generated worker's atomic handle_error/4 runs the trigger's on_error action on a job's final attempt inside a rescue that, when the action itself raises, calls handle_error/4 again with the same job. The job's attempt still equals max_attempts, so it re-enters the same clause and re-runs the failing action, with no exit. Any deterministic on_error failure (a data-layer outage, a misconfigured action, or a record the action rejects) loops forever; because the recursive call is not in tail position, each iteration retains a formatted stacktrace and the process heap grows without bound while the failing statement is re-issued against the data layer until the runtime kills the worker.
This issue affects ash_oban: from 0.8.0-rc.1 before 0.8.14. |
| CVE-2026-80223 | Incorrect Authorization vulnerability in ash-project ash_graphql allows an authenticated subscriber in one tenant to receive another tenant's records over GraphQL subscriptions.
The subscription resolver in AshGraphql.Graphql.Resolver authorizes each notification payload in memory: its fast path calls Ash.can/3 with run_queries?: false, which evaluates the read policy filter against the in-memory record via Ash.Expr.eval/2 and never issues a query. Ash applies multitenancy at query-build and data-layer-prefix time, not inside query.filter, so the evaluated policy carries no tenant condition and a tenant-B notification routed to a tenant-A subscriber is emitted whenever the policy filter is true. The single-notification clause has no tenant guard at all, and the batched clause checks only the head of the notification list, so non-head entries authorize purely in memory. A tenant-scoped read is reached only when filter evaluation fails.
This issue affects ash_graphql: from 1.4.0 before 1.11.0. |
| CVE-2026-80227 | Incorrect Comparison vulnerability in ash-project ash_sql allows a user to pad a string field with tab, newline, carriage-return, or form-feed characters and pass a trimmed uniqueness or equality check in the database that the same expression would fail in memory (or the reverse).
string_trim/1 compiles to REGEXP_REPLACE patterns built from an Elixir string in which \s is the escape for a single space (codepoint 32), not a regex whitespace class. The generated SQL therefore removes only literal spaces and leaves tabs, newlines, carriage returns, and form feeds in place, whereas String.trim/1 in Elixir removes them all. Any Ash filter, validation, or identity that relies on string_trim/1 then behaves differently depending on whether Ash pushes the expression down to SQL or evaluates it in memory, so padded input can register a near-duplicate value or slip past a trimmed comparison.
This issue affects ash_sql: from 0.1.0 before 0.7.1. |
| CVE-2026-81316 | Incorrect Authorization vulnerability in ash-project ash_sql allows a caller to receive an aggregate value computed over rows a more restrictive filter should have excluded, disclosing counts, sums, or lists across an authorization or tenancy boundary.
AshSql.Aggregate.different_queries?/2 reports two aggregate queries as different only when their filter and their sort both differ. Aggregate queries rarely carry a sort, so two aggregates that share a name but carry entirely different filters compare as identical. The colliding aggregate keeps its name and is treated as already computed, and select_aggregates returns the first-registered variant's value. The same name reaches the builder twice with different filters when actor or tenant context is stamped into each aggregate's query, so a narrowly filtered aggregate can be served the value of a previously registered broad one.
This issue affects ash_sql: from 0.1.0 before 0.7.1. |
| CVE-2026-81318 | Incorrect Authorization vulnerability in ash-project ash_sql allows a caller in a schema-based multitenant application to receive aggregate values computed from another tenant's rows.
When an aggregate is computed over a distinct query, AshSql.AggregateQuery.add_single_aggs/5 rebuilds the outer query from query.from.source alone, which is only the {table, schema} tuple and does not carry query.prefix or query.from.prefix. For strategy(:context) multitenancy those hold the tenant schema, so the rebuilt outer query reads the repo's default schema while the inner correlated subquery still reads the tenant schema, and the two are joined only on primary key. The aggregate, and any relationship join added off the prefix-less binding, is then computed against the wrong tenant's rows. The neighbouring limit and exists branches instead wrap the query with subquery/1, which preserves the prefix.
This issue affects ash_sql: from 0.1.0 before 0.7.1. |
| CVE-2026-81633 | Improper Input Validation vulnerability in ash-project ash_graphql allows an unauthenticated client to crash a relay node(id: ...) query with an unhandled KeyError.
AshGraphql.Graphql.Resolver.resolve_node/2 decodes the client-supplied global ID with decode_relay_id/1, which only base64-decodes the string and splits it on : without validating the type segment. The decoded type is passed straight to Map.fetch!(type_to_domain_and_resource_map, type). Because fetch! raises on a missing key, a relay ID whose type segment is a valid atom that is not a relay-exposed type aborts the resolver before its resolve/2 clauses and their rescue handlers run, so the error never becomes a GraphQL error and may expose a stacktrace. Common resource names are easy to guess. The fix uses Map.fetch/2 and returns an Invalid node id error for unknown types.
This issue affects ash_graphql: from 0.27.0 before 1.11.0. |
| CVE-2026-81636 | Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_graphql allows an unauthenticated client to bypass the configured GraphQL query-complexity limit and force an unbounded database read.
AshGraphql.Graphql.Resolver.query_complexity/3 multiplies child complexity by the requested page size only when the argument map contains :limit (offset pagination). Relay connections and keyset pagination use first and last, which never match that clause and fall through to the catch-all that returns child_complexity + 1. A nested relay query such as posts(first: 500) { edges { node { comments(first: 500) { ... } } } } therefore scores as trivially cheap while materializing the full fan-out, passing an Absinthe max_complexity cap that rejects the equivalent limit-based query. The fix adds first and last clauses clamped to the action's page size.
This issue affects ash_graphql: from 0.16.23 before 1.11.0. |
| CVE-2026-82367 | Exposure of Data Element to Wrong Session vulnerability in ash-project ash_graphql can deliver one subscription's resolved records to a different subscriber's topic.
AshGraphql.Subscription.Batcher.do_send/5 reads the resolved batch from the process dictionary via Process.get(:batch_resolved) and then unconditionally deletes it. That is sound only inside a task the library owns. On the :backpressure_sync and :noproc fallbacks do_send/5 runs inline in the publishing caller's process, so if a resolver inside an outer do_send/5 triggers another synchronous Ash notification, the inner call finds the outer run's value still under :batch_resolved, adopts it as its own result, and publishes it to the inner topic, a different subscription document with a different actor and tenant. It then deletes the key, so the outer run publishes nothing. The key is not namespaced by run, so records cannot be told apart. The fix saves, clears, and restores :batch_resolved around each run.
This issue affects ash_graphql: from 1.4.0 before 1.11.0. |
| CVE-2026-82478 | A vulnerability was determined in NASA Trick 19.6.0. This issue affects the function JSONVariableServerThread::parse_request of the file trick_source/sim_services/JSONVariableServer/JSONVariableServerThread.cpp of the component TCP Socket Handler. This manipulation causes stack-based buffer overflow. The attack is possible to be carried out remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-82479 | A vulnerability was identified in NASA cFS up to 7.0.1. Impacted is the function OS_read of the file modules/protocol/tcp/fsw/src/sbn_tcp_if.c of the component SBN TCP Module. Such manipulation of the argument MsgSz leads to buffer overflow. The attack must be carried out from within the local network. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-82591 | A security vulnerability has been detected in Open Asset Import Library Assimp up to 6.0.2. The impacted element is the function MD5Importer::MakeDataUnique of the file code/AssetLib/MD5/MD5Loader.cpp. The manipulation of the argument iNewIndex leads to heap-based buffer overflow. The attack can only be performed from a local environment. The identifier of the patch is bf9dabb617c46e5133dac65cca6bff177917afcb. Applying a patch is the recommended action to fix this issue. |
| CVE-2026-82594 | A vulnerability has been found in LogNet grpc-spring-boot-starter up to 5.2.0. Affected is an unknown function of the component Annotation Processing. Such manipulation leads to improper authorization. The attack may be performed from remote. A high complexity level is associated with this attack. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-82635 | Pake before 3.13.1 joins the JavaScript-supplied filename for the download_file Tauri command onto the user's Downloads directory with no sanitization. A filename containing path traversal sequences (for example ../Library/LaunchAgents/com.evil.plist) or an absolute path resolves outside ~/Downloads. The command then fetches attacker-controlled content from the supplied URL (via Rust HTTP, not the browser) and writes it to that path. A script that can invoke the command can overwrite user-writable files and install persistence (macOS LaunchAgents, Linux autostart, Windows Startup), leading to code execution in the user account. All desktop apps generated from an affected Pake tree expose the same command. |
| CVE-2026-82636 | Qubes OS before qubes-core-dom0-linux 4.3.22 allows OS command injection during a qvm-copy-to-vm call from dom0 to an attacker-controlled qube, because the "system" library function is used to process an error message that may have shell metacharacters. This occurs in core-admin-linux/file-copy-vm/qfile-dom0-agent.c. |
| CVE-2026-82637 | browser-use web-ui versions 2.0.0 through 3.0.0 fail to validate browser settings paths in run_agent_task, allowing attackers to create directories at arbitrary locations by supplying absolute paths to save_recording_path, save_trace_path, save_agent_history_path, or save_download_path parameters. Attackers can exploit this via the unauthenticated Gradio interface to create directories anywhere the root-running container has write access. |
| CVE-2026-82640 | browser-use web-ui versions 2.0.0 through 3.0.0 write configured LLM API keys to disk in cleartext without encryption or access restrictions. Attackers with read access to the temporary settings directory can recover provider API keys from predictably-named JSON files. |
| CVE-2026-82641 | keploy versions 3.1.0 through 3.6.25 bind the agent control-plane HTTP server to all interfaces without authentication, exposing endpoints that stream TLS session keys and traffic data. Attackers can access the /agent/pcap/keylog endpoint to retrieve NSS keylog lines and decrypt recorded TLS traffic, or invoke /agent/stop and /agent/storemocks to manipulate recording sessions. |
| CVE-2026-82642 | Readest is an open-source e-book reader built on Tauri. In versions prior to 0.11.16, EPUB chapter HTML is sanitized with DOMPurify using a configuration that forbade only the <script> tag (FORBID_TAGS: ['script']) in apps/readest-app/src/services/transformers/sanitizer.ts. DOMPurify does not parse the contents of the srcdoc attribute on <iframe> elements, treating it as an opaque string attribute, so an attacker who can get an <iframe> element to survive sanitization can embed a complete HTML document containing a <script> tag inside srcdoc and have it execute when the browser renders the iframe. The content iframe is configured with sandbox="allow-same-origin allow-scripts", so script executing inside it shares the parent origin and can reach parent.parent.__TAURI_INTERNALS__.invoke(...), giving access to every Tauri IPC command the application is permitted to use, which escalates to arbitrary code execution. The payload can be made invisible (zero-size, transparent iframe) so the reader sees only normal book text. Version 0.11.16 hardened the sanitizer configuration by adding 'iframe', 'object' and 'embed' to FORBID_TAGS and adding 'srcdoc' to FORBID_ATTR. |
| CVE-2026-82643 | WWBN AVideo contains an unauthenticated credential submission vulnerability in plugin/Live/api/preauthorize.json.php that accepts credentials over GET without rate limiting. Attackers can submit correct credentials repeatedly to trigger uncapped two-factor confirmation emails and perform sustained password guessing attacks against user accounts. |
| CVE-2026-82644 | WWBN AVideo (current e01e41ecc and earlier) contains a brute-force rate limiting bypass in enforceRateLimit(), which protects login.json.php and 13 other endpoints. The function stores its attempt counter via a cache layer (ObjectYPT::setCacheGlobal) that silently discards writes for any client identified as a bot by isBot(). Because isBot() treats a missing User-Agent header as a bot by default — and also matches common bot identifiers such as 'curl', 'bot', 'crawler', and 'spider' — the counter never increments for such clients, so the rate limit never fires. An unauthenticated attacker can therefore submit unlimited login attempts (e.g., by omitting the User-Agent header or using curl's default User-Agent), enabling unrestricted password-guessing attacks. |
| CVE-2026-82645 | AVideo (current commit e01e41ecc and earlier) exposes stream credentials through the plugin/Live/view/Live_restreams/getLiveKey.json.php endpoint. Supplying a 'token' request parameter waives both the Live::canRestream() access gate and the restream ownership check, causing the endpoint to return any restream's stream_key and stream_url (credentials for external platforms such as YouTube, Facebook, and Twitch) without authentication. The token is merely encryptString() of an integer id with no user binding, expiry, or authentication tag. Because encryption uses AES-256-CBC with a deterministic IV and no MAC, and because intval() accepts any string beginning with a digit, an unauthenticated attacker can forge valid tokens using the public encryption oracle in view/url2Embed.json.php, disclosing arbitrary users' stream credentials. |
| CVE-2026-82646 | WWBN AVideo contains an unauthenticated reflected cross-site scripting vulnerability in the url2Embed.json.php endpoint that allows attackers to inject malicious scripts by supplying URLs with HTML metacharacters. Attackers can mint an encrypted evideo payload containing unescaped markup, then deliver it as a legitimate-looking link on the site's own domain to execute JavaScript in victims' sessions and steal cookies or CSRF tokens. |
| CVE-2026-82647 | WWBN AVideo contains a cross-site request forgery vulnerability in sendEmail.json.php that allows authenticated administrators to send mail from the site's contact address by bypassing origin checks and captcha validation. Attackers can craft a malicious web page that, when visited by an authenticated admin, sends emails with attacker-controlled subject and body to arbitrary recipients, passing SPF/DKIM/DMARC validation for phishing and brand impersonation attacks. |
| CVE-2026-82648 | WWBN AVideo contains a server-side request forgery filter bypass vulnerability in the isSSRFSafeURL function that fails to normalize NAT64 addresses written in hexadecimal form. Attackers can bypass SSRF protections by supplying hex-encoded NAT64 addresses like 64:ff9b::a9fe:a9fe to reach cloud metadata services and loopback interfaces. |
| CVE-2026-82655 | Admidio before 5.0.12 contains a blind SQL injection vulnerability in the relation_type_list parameter of lists_show.php that allows unauthenticated attackers to execute arbitrary SQL queries. Attackers can bypass authentication by providing a dummy UUID in role_list and inject SQL through relation_type_list to extract database contents including password hashes and user credentials. |
| CVE-2026-82656 | Admidio before 5.0.12 fails to sanitize album names in the photo ZIP download functionality, allowing authenticated users with album-creation rights to include path traversal segments in archive entry names. Attackers can craft malicious album names containing directory traversal sequences that escape the intended directory when recipients extract the archive, potentially writing files outside the target directory. |
| CVE-2026-82657 | Admidio before 5.0.12 fails to enforce login-only module restrictions in RSS feed endpoints for forum and announcements modules. Unauthenticated attackers can retrieve forum topics and announcements by sending GET requests to rss/forum.php or rss/announcements.php, disclosing titles, full post text, author names, and timestamps. |
| CVE-2026-82658 | Admidio versions before 5.0.12 contain a broken access control vulnerability in profile_function.php that allows authenticated low-privilege users to read another user's future role memberships. Attackers can bypass profile-level authorization by directly calling the reload_future_memberships endpoint with a victim's user UUID to disclose sensitive membership information. |