| CVE-2024-14044 | A vulnerability was identified in Open5GS up to 2.7.1. This issue affects the function pcrf_rx_aar_cb of the file src/pcrf/pcrf-rx-path.c of the component Diameter Rx Handler. The manipulation of the argument num_of_media_component/num_of_sub leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 2.7.2 is capable of addressing this issue. The identifier of the patch is 87b4e4535c77ded627cdb6f4e4e2e3ea761f40b7. It is recommended to upgrade the affected component. |
| CVE-2025-41769 | The device's PROFINET service is affected by a buffer overflow vulnerability that exists in the default configuration. An unauthenticated remote attacker could exploit this vulnerability to reboot the device or execute arbitrary code. |
| CVE-2025-41770 | An unauthenticated denial-of-service vulnerability in the device's PLCnext Engineer communication interface allow an remote attacker to interrupt access via the client application. Successful exploitation prevents communication until the PLCnext service is manually restarted. |
| CVE-2025-41771 | An authenticated attacker with low privileges can access an endpoint in the controller’s web interface that is vulnerable to SQL injection. The vulnerability affects a SQLite database used only for storing notification messages. Therefore, the impact is limited to the system’s notification functionality. |
| CVE-2025-59319 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to certify the integrity of the intended boot partition and selects the first partition index matching a hardcoded type value. A crafted Linux partition could be inserted ahead of this intended target, allowing for code execution in the context of high privilege. |
| CVE-2025-59320 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 stores TPM2.0 secrets in a serialized format within unused disk sectors. An unauthenticated attacker with physical access to the system disk can recover this information and craft an environment to unseal the TPM. |
| CVE-2025-59321 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 contains a default TPM PCR policy that fails to consider the system boot state. This allows the TPM to be unsealed via an unintended execution path or from another hardware platform. |
| CVE-2025-59322 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to properly handle decryption errors and allows encrypted volumes to be mounted as plaintext. |
| CVE-2025-59323 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to validate the integrity of the DataStore, a non-partitioned filesystem, responsible for storing configuration and cryptographic details. Crafted DataStore contents can impact service availability and/or allow for code execution in the context of high privilege. |
| CVE-2025-59324 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to properly validate LUKS encryption and, if encryption is present, all CryptoPro file integrity checks are skipped. |
| CVE-2025-59325 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to encrypt the initramfs contents, allowing for the offline recovery of secrets and cryptographic details. |
| CVE-2025-59326 | CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to enforce IMA policy protections across temporary file systems, allowing for unsigned code to be executed from these locations. |
| CVE-2025-59327 | In CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4, bootxsa.efi fails to properly validate LUKS encryption and, if encryption is present, all CryptoPro file integrity checks are skipped. |
| CVE-2026-13094 | IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable configuration file. |
| CVE-2026-13105 | IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to zip slip path traversal exploit when importing a configuration. |
| CVE-2026-13361 | IBM Informix oninit sq_sgkprepare RCE via unchecked SQL Interface length field. |
| CVE-2026-13367 | IBM Informix Dynamic Server 14.10, and 15.0 contain a local privilege escalation vulnerability in the oninit setuid-root utility. |
| CVE-2026-13433 | IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 (ACS) is vulnerable to downloading unverified product code when configured to update from an IBM i. A bad actor could use this vulnerablity to run compromised code on the ACS user's workstation. |
| CVE-2026-13476 | IBM Informix Dynamic Server 14.10, 15.0, and 12.10 could allow an unauthenticated user to execute arbitrary commands with service account privileges on the system due to improper validation of user supplied input. |
| CVE-2026-14478 | A maliciously created executable, when executed on the victim's machine, may allow a local low-privileged attacker to inject unauthenticated IPC messages into named pipes, modify pipe permissions or ownership, and potentially impact confidentiality, integrity, and availability. |
| CVE-2026-15803 | In Eclipse RDF4J, several XML parser entry points do not fully restrict XML External Entity (XXE) processing when parsing untrusted XML-based RDF data or query results, permitting DOCTYPE declarations, external entity references, and external DTD loading. This is due to an incomplete fix for CVE-2018-1000644: the earlier fix did not cover all parser entry points. The issue is resolved in RDF4J 5.3.2, which rejects or disables DOCTYPE declarations, external entities, and external DTD loading by default. |
| CVE-2026-16033 | A path traversal vulnerability in LXD allows an attacker to achieve arbitrary host file read or unconstrained file creation. When processing image metadata templates, LXD fails to properly sanitize or restrict template file paths from escaping the instance templates directory (specifically affecting virtual machine / QEMU driver execution paths). An attacker can exploit this flaw by providing a crafted image archive with malicious template directives containing path traversal sequences, causing LXD to access or write files outside the intended template directory on the host system. |
| CVE-2026-16856 | IBM i 7.6, and 7.5 could allow a local attacker to gain elevated privileges due to improper neutralization of special elements used in an OS command. |
| CVE-2026-16860 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to an uncontrolled search path element. |
| CVE-2026-16863 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. |
| CVE-2026-16904 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary commands due to improper privilege management during monitor owner reassignment. |
| CVE-2026-16906 | IBM i 7.6, and 7.5 could allow a remote authenticated attacker to execute arbitrary commands with elevated privileges due to improper neutralization of special elements used in an OS command. |
| CVE-2026-16907 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to improper bounds checking. |
| CVE-2026-17082 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to gain elevated privileges due to improper validation of a client-supplied profile name. |
| CVE-2026-17083 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. |
| CVE-2026-17109 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to add unexpected parameters to a command due to parameter injection. |
| CVE-2026-17218 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. |
| CVE-2026-17222 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to modify data in certain SQL tables due to improper neutralization of special elements used in an SQL command. |
| CVE-2026-17248 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to improper neutralization of special elements in an OS command. |
| CVE-2026-17445 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to improper validation of an attacker-supplied user profile name. |
| CVE-2026-17485 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and obtain sensitive information due to an integer underflow. |
| CVE-2026-18098 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information and compromise system integrity due to an XML injection flaw. |
| CVE-2026-18099 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary script code due to improper neutralization of user-controlled input. |
| CVE-2026-18106 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of user-supplied path input. |
| CVE-2026-18171 | Docker Sandboxes (sbx) applies the read-only intent of a runtime host mount to the in-guest container bind only: the underlying virtio-fs host-edge grant is added to the sandbox's policy-share allowlist with no access mode. The directory stays writable at its shared-export path, so unprivileged code inside the sandbox can derive that path and write to a host directory the operator attached read-only. |
| CVE-2026-18235 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary Control Language commands due to insufficient input validation. |
| CVE-2026-18246 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to an interpretation conflict in the multipart parser. |
| CVE-2026-18250 | IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information and bypass security restrictions due to a race condition. |
| CVE-2026-18652 | Velociraptor allows reading Stacked result sets from the GUI. Velociraptor's multi-tenant design stores sub orgs within the datastore directory. The path requested by the GUI is not correctly checked against the prefix deny list, allowing result sets to read from denied prefixes.
In particular, a user with read access to the root org can access result sets from child orgs. |
| CVE-2026-18663 | A flaw was found in 389-ds-base. The get_ldapmessage_controls_ext() function frees the parsed controls array on the Session Tracking critical-control rejection path without clearing the SLAPI_REQCONTROLS pblock slot. Operation teardown then frees the same pointer again, causing a double-free. An unauthenticated remote attacker can trigger this with a single BIND request carrying a critical Session Tracking control, resulting in heap corruption and potential denial of service. |
| CVE-2026-18669 | IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to a privilege escalation as the result of a remote code execution vulnerability in the activation engine component. An authenticated attacker can execute a maliciously planted script with root authority. |
| CVE-2026-18675 | The dataplane token validator in kuma-cp performs an unchecked Go type assertion on the JWT kid header. A token whose kid is a JSON number decodes as a float64 and triggers a runtime panic before any signature, claims, or authorization check runs.
The panic terminates the entire kuma-cp process, HTTP API, the health and readiness endpoints, and xDS. Unauthenticated access to the dataplane gRPC server can trigger the crash with a malformed token
A single request is a transient interruption; sustaining an outage requires repeated requests. |
| CVE-2026-18676 | The default kuma-cp configuration in Kong Mesh reveals the admin bootstrap token and signing keys to any webpage the operator visits while the control plane is reachable from their browser. Due to a CORS misconfiguration a cross-origin fetch() from a malicious page returns the admin JWT and signing material. |
| CVE-2026-18677 | In Kong Mesh running in universal mode with a MeshIdentity whose SPIFFE ID path template derives from the dataplane's kuma.io/workload label, the XDS authenticator in kuma-cp validates that label only when the dataplane token is bound to a workload. Workload binding is optional, so a dataplane presenting a tags-bound token can register with kuma.io/workload set to any value and obtain another workload's SPIFFE identity. |
| CVE-2026-18678 | When an operator adds an HTTPS control plane profile to kumactl without providing a CA certificate, kumactl disables TLS verification and sends API tokens over the unverified connection.
An attacker on the network path between the operator and the control plane can intercept user or admin API tokens and then act against the control plane as that user. |
| CVE-2026-18683 | IBM i 7.6, 7.5, 7.4, and 7.3 is vulnerable to privilege escalation via Navigator for i. An authenticated user could elevate privileges to a root user to execute commands. |
| CVE-2026-18713 | IBM i 7.6, 7.5, 7.4, and 7.3 s vulnerable to privilege escalation via Navigator for i. An authenticated user could elevate privileges to a root user to execute commands. |
| CVE-2026-18726 | A flaw was found in open-iscsi. This vulnerability allows a remote attacker on the same local network segment to cause a Denial of Service (DoS) in the iscsiuio daemon. By sending a specially crafted Internet Control Message Protocol version 6 (ICMPv6) Router Advertisement with a zero-length option, the attacker can trigger an infinite loop. This leads to sustained CPU usage, rendering the daemon unresponsive and impacting system availability. A secondary risk of out-of-bounds reads exists with a short IPv6 payload, though no memory corruption or data exposure has been confirmed. |
| CVE-2026-18727 | A flaw was found in open-iscsi's iscsiuio component. This vulnerability involves an integer underflow and out-of-bounds read during Dynamic Host Configuration Protocol for IPv6 (DHCPv6) packet parsing. Specifically, crafted DHCPv6 Advertise traffic with a short User Datagram Protocol (UDP) length can cause the DHCPv6 payload length to underflow. An unauthenticated attacker on an adjacent network segment can exploit this by sending specially crafted IPv6 UDP traffic while the client is in an active DHCPv6 exchange, leading to a denial of service due to a process crash or service disruption. |
| CVE-2026-18744 | Any authenticated case participant can fetch any OTHER vendor's CaseStatement + per-vul CaseMemberStatus by supplying that member's id — test_func only checks _is_my_case, not ownership of kwargs['member']. Bypasses share_status; leaks embargoed vendor affected/not-affected + statement text cross-tenant. |
| CVE-2026-18749 | The type=track branch authorises on _is_my_case(t_attach.case) only and never checks VinceTrackAttachment.shared. A coordinator-uploaded case artefact that has NOT been marked shared is still retrievable by any case member who has (or is sent) its uuid — leaks not-yet-released coordinator material to vendors on the case. |
| CVE-2026-18750 | vinny/views.py: (ModifyEmailNotifications) IDOR: view fetches VinceCommEmail by raw pk from URL and toggles email_function/name without checking the record's contact belongs to the requesting group-admin. Lets a vendor admin flip notification routing (or read email/name) for another vendor's contact. |
| CVE-2026-18888 | The MongoDB BI Connector ODBC Driver converts floating point column values into text without checking that the result fits within the destination buffer. When an application reads a sufficiently large floating point value as text, the driver may write beyond the end of that buffer and corrupt adjacent memory. A user who can store data in a collection read through the BI Connector could use this to crash the application performing the read. |
| CVE-2026-19001 | The MongoDB BI Connector ODBC Driver may write outside the bounds of a fixed-size buffer when an application supplies an unusually long catalog, schema, or object name to a metadata retrieval function. This may result in memory corruption within the calling application's process, leading to abnormal termination and, under certain conditions, the potential for arbitrary code execution. |
| CVE-2026-19002 | A missing bounds check when parsing stored procedure parameter metadata in the MongoDB BI Connector ODBC Driver can result in an out-of-bounds write in the client application process. Triggering this issue requires control over the server the driver connects to, or the ability to respond in its place, in order to return malformed metadata. The resulting memory corruption may cause the client application to terminate abnormally or, under certain conditions, execute unintended code. |
| CVE-2026-19003 | A data source definition containing an over-length file path setting may cause the MongoDB BI Connector ODBC Driver setup dialog to write outside the bounds of an allocated buffer. The issue stems from an incorrect buffer capacity calculation in the dialog's file and folder selection handling, and is reached only when a user opens the setup dialog for such a data source and initiates a file or folder selection. Depending on build configuration, the result may range from abnormal process termination to, under certain conditions, execution of unintended code in the context of the user running the dialog. |
| CVE-2026-19004 | An application using the MongoDB BI Connector ODBC Driver may experience a memory-safety issue when processing output parameters from a stored procedure. Triggering this issue requires connecting to an untrusted or impersonated database server that returns crafted metadata. This may result in process termination, disclosure of process memory, or, under certain conditions, arbitrary code execution. |
| CVE-2026-19130 | A flaw was found in the provider-credential-controller component of multicluster-engine (MCE). An attacker with specific permissions on the hub cluster, and knowledge of a prior credential value, could exploit an authorization bypass vulnerability. By manipulating `copiedFrom` labels, the attacker could intercept newly rotated provider credentials, leading to unauthorized information disclosure. This allows access to sensitive credentials that should otherwise be protected. |
| CVE-2026-19311 | Missing authorization in the Execute Monitor API in Amazon OpenSearch Alerting plugin might allow an authenticated remote user to read, modify, or delete arbitrary index data via a crafted inline monitor request with unintentional data source and input index parameters. |
| CVE-2026-19426 | POS System developed by FitSoft has a Missing Authentication vulnerability. Unauthenticated remote attackers can directly access and operate the system. |
| CVE-2026-19502 | MongoDB SQL Schema Builder CLI records its startup configuration to standard output and, when file logging is enabled, to a log file on disk. Certain connection settings were written without redaction, so authentication material supplied by the operator could appear in plaintext in that diagnostic output. A local user with read access to the terminal session or the log directory, or anyone with access to a location where those logs are subsequently collected, could obtain those values. |
| CVE-2026-19503 | MongoDB Schema Manager and MongoDB Atlas SQL ODBC Driver do not validate the scheme of the authorization and token endpoints returned by an OIDC issuer's discovery document. A user induced to connect to an uncontrolled MongoDB deployment using MONGODB-OIDC authentication may have an uncontrolled URI dispatched to their operating system's default protocol handler, potentially exposing credentials or, under certain conditions, resulting in code execution in the user's context. |
| CVE-2026-19548 | Multiple Use-After-Free vulnerabilities were found in the add_archive_element function in ld/ldmain.c of the GNU linker (ld), a component of binutils. The root cause is that plugin_maybe_claim() in ld/plugin.c frees the original BFD object via bfd_close/_bfd_delete_bfd when entry->the_bfd->my_archive == NULL, but the caller retains both the original abfd parameter and a shallow copy (orig_input.the_bfd) as dangling pointers. These dangling pointers are subsequently dereferenced at three distinct locations in add_archive_element:
1. Line ~1442: accessing abfd->my_archive via bfd_usrdata(abfd->my_archive)
2. Line ~1493: multiple accesses to abfd and abfd->my_archive in a conditional check and bfd_get_filename call
3. Line ~1525: dereferencing the shallow copy orig_input.the_bfd->my_archive in trace/verbose logging
The vulnerability is triggered when LTO plugins are active (link_info.lto_plugin_active is true) and the input object has abfd->my_archive == NULL, which is a valid state for standalone object files. Red Hat builds binutils with --enable-plugins and --enable-lto, confirming the vulnerable code path is compiled in and reachable.
An attacker who can supply a crafted object or archive file to a build process using LTO-enabled linking could exploit this flaw to cause a denial of service (linker crash via segmentation fault). Arbitrary code execution is theoretically possible through heap manipulation but is substantially mitigated by hardening measures including stack protector, FORTIFY_SOURCE, ASLR, and PIE.
The attack surface is limited to build-time environments — the linker is a development tool not exposed in production runtime. The most realistic exploitation scenario is a supply chain attack introducing a crafted object file as a build dependency in CI/CD pipelines or development environments. |
| CVE-2026-19566 | Net::CIDR::Set versions before 0.23 for Perl allow memory exhaustion and malformed set ranges via unbounded IPv6 prefix lengths.
The _encode method accepts any prefix length matching `(0|[1-9][0-9]*)` and passes it to _width2bits(), which builds the mask as `'1' x ($width + 8)`, one character per bit. The _inc() method then unpacks the packed mask into a Perl array of one scalar per byte, so the prefix length alone sets the allocation size: `::/100000000` builds a 100 MB string and a 12.5 million element array. The value being tested is parsed, not just the configured ranges: contains() builds a set from its argument, and _guess_coder() tries the IPv4 coder and then the IPv6 coder, so an IPv4-only set expands an oversized IPv6 prefix length before the mixed address width check rejects it.
Any caller that passes untrusted input to contains() or add() can exhaust process memory. A prefix length above 128 is also stored as a range that does not match the requested block: 2001:db8::/129 stringifies back unchanged, contains() of its own base address returns false, and removing it from a set drops the base address while the set still prints as covering it. |
| CVE-2026-44741 | Pimcore's Admin Classic Bundle provides a Backend UI for Pimcore. Versions prior to 2.3.6 and 1.7.18 have a SQL injection vulnerability in Pimcore's translation grid date filter — the user-supplied `property` field from the filter JSON is interpolated directly into a `UNIX_TIMESTAMP(DATE(FROM_UNIXTIME(...)))` SQL expression without parameterization or allowlist validation. Versiosn 2.3.6 and 1.7.18 fix the issue. |
| CVE-2026-46382 | The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, a user-supplied private/local URI can be made to be fetched without checks. Version 1.12.2 contains a fix. No known workarounds are available. |
| CVE-2026-46688 | The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, an unauthenticated request can be made to redirect the user to a query-specified location. This allows an attacker to create a specially-crafted URL to an MRBS installation that will cause the user who clicks it to be redirected to the attacker-specified redirect URL, which could be a spoofed MRBS login page, for example. Version 1.12.2 contains a fix. No known workarounds are available. |
| CVE-2026-46731 | Dell Display and Peripheral Manager (DDPM Windows), versions prior to 2.3.0.17, contain an Authentication Bypass by Spoofing vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges and arbitrary code execution. |
| CVE-2026-48791 | sigstore-java is a sigstore java client for interacting with sigstore infrastructure. Version 2.0.0 erroneously removed verification of the integrated (Rekor entry) time) against the Fulcio certificate. Version 2.1.0 re-added this verification with enhancements that adhere to the Sigstore verification spec. The old sigstore-conformance test for this check was built incorrectly. This vulnerability impacts only users verifying bundles with `dev.sigstore:sigstore-java:2.0.0`. Older versions are not affected; it is fixed in `dev.sigstore:sigstore-java:2.1.0` A malicious actor may exploit this if they were able to access a users system and exfiltrate the temporary private key used during signing and then reuse an old fulcio certificate later without requiring direct access to the user's credentials. Users may protect themselves by re-verifying their artifacts using the newest sigstore-java or another current sigstore client. Transparency logs may also be audited for unauthorized signatures for a suspected reused identity. |
| CVE-2026-49349 | regclient is a Docker and OCI Registry Client in Go. Prior to version 0.11.5, credentials for a registry may be inadvertently leaked to external servers. A prerequisite for this attack is a malicious registry server, a malicious blob store, or a registry that does not restrict the external URLs for foreign blobs. Version 0.11.5 fixes the issue. |
| CVE-2026-49819 | UpSnap is a wake on lan web app. Versions 4.4.1 through 5.3.5 are vulnerable to a missing-authentication / privilege-escalation chain in `pb.HandlerInitSuperuser` (`backend/pb/handlers.go:249`), reachable as `POST /api/upsnap/init-superuser`. The vulnerable code lacks any authentication, setup token, IP allow-list, or rate limit and is gated only by a `totalSuperusers > 0` count check — a condition that is false on every fresh install — allowing an unauthenticated network-adjacent attacker to register the initial superuser account, receive a long-lived JWT, and pivot to root remote code execution at `backend/networking/wake.go:43` (`exec.CommandContext(ctx, "/bin/sh", "-c", wake_cmd)`). Version 5.4.0 fixes the issue. |
| CVE-2026-50561 | Yuxi is a large-model-based intelligent knowledge base and knowledge graph agent development platform. Prior to version 0.6.2, the project's authentication mechanism contains a flaw. In affected versions, the system does not sufficiently validate the identity token in the Authorization header — only performing a validity check. This allows an administrator token generated in another deployment instance or local testing environment to be used to access the backend management interfaces of a different affected instance. An attacker who obtains or constructs an acceptable administrator Authorization token may bypass normal login authentication and gain administrator privileges. This vulnerability could allow an attacker to access system configurations, invoke backend management APIs, create administrator accounts, and ultimately take over the system backend. This issue has been fixed in version 0.6.2. Before upgrading, users are advised to implement the following temporary measures: Set the environment variable `JWT_SECRET_KEY` to a non-default value, and configure a unique, sufficiently strong JWT/authentication key for each deployment instance; and/or avoid exposing backend management interfaces directly to the public network. |
| CVE-2026-53996 | NetBSD's hdaudio(4) driver in sys/dev/hdaudio/hdaudio.c contains a missing access control vulnerability that allows unprivileged local attackers to invoke the HDAUDIO_FGRP_SETCONFIG ioctl without elevated permissions by exploiting the absence of an access check on /dev/hdaudioN device nodes. Attackers can repeatedly issue HDAUDIO_FGRP_SETCONFIG from one thread while keeping DMA and IRQs live from a second thread to trigger a use-after-free race condition in hdafg_detach() between stream_stop() and stream_disestablish(), where a latched DMA interrupt dereferences a freed callback pointer, resulting in outcomes ranging from audio-subsystem denial of service and kernel panic to potential local kernel privilege escalation. |
| CVE-2026-57858 | Cal.com Cal.diy versions 2.1.1 through 6.2.0 contain a stored cross-site scripting vulnerability in the BookingPageTagManager component that allows authenticated event owners to inject arbitrary JavaScript by supplying a malicious analytics tracking ID without sanitization. Attackers can close the inline script string literal with a crafted payload that executes in the browser of every visitor to the affected public booking page, enabling session cookie theft, forged authenticated requests, and wormable propagation by chaining with CSRF-able endpoints to persist payloads on additional events. |
| CVE-2026-59242 | Apache Airflow's XCom `GET /api/v2/{...}/xcomEntries/{key}?deserialize=true` endpoint passed a string-literal payload through `BaseXCom.deserialize_value` without the `_check_forbidden_xcom_keys` guard, allowing an authenticated API user with XCom write-and-read access to instantiate arbitrary `airflow.*` classes on the API server (CWE-502). An authenticated user who can write an XCom value and then read it back with `deserialize=true` triggers the unsafe instantiation. Users are advised to upgrade to apache-airflow 3.3.1 or later, which rejects reserved XCom serialization keys submitted as JSON string literals. |
| CVE-2026-59244 | Apache Airflow's secrets masker did not mask `var.json` Variable values whose value is a dict in the Rendered Templates UI — the dict value failed an `isinstance(str)` guard — so a secret stored as a JSON Variable and referenced in a template via `var.json` was displayed in cleartext to any user with access to that task's Rendered Templates view. Users are advised to upgrade to apache-airflow 3.3.1 or later, which masks nested Variable values regardless of type. |
| CVE-2026-59914 | Dell Display and Peripheral Manager (DDPM Windows), versions prior to 2.3.0.17, contain an Authentication Bypass by Spoofing vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges and arbitrary code execution. |
| CVE-2026-59916 | Dell Display and Peripheral Manager (DDPM Windows), versions prior to 2.3.0.17, contain Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges and arbitrary code execution. |
| CVE-2026-59917 | Dell Display and Peripheral Manager (DDPM Windows), versions prior to 2.3.0.17, contain Improper Access Control vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges and arbitrary code execution. |
| CVE-2026-64639 | Incorrect database cloning process in Plesk from 18.0.52 before 18.0.79.6 and 18.0.80.2 allows a low-privileged user (customer, reseller) to execute arbitrary code on behalf of the database server administrator. |
| CVE-2026-6484 | In an UEFI, Lack of verified boot to certain FV may cause arbitrary code execution. |
| CVE-2026-64951 | A rogue Velociraptor client can upload a malformed sparse file such that if the GUI attempts to expand the file, a panic occurs which may crash the server process.
The problem is a Divide by Zero bug in the ShouldPadFile() function. |
| CVE-2026-64952 | The hunt_delete() VQL function allows deleting hunts.
Velociraptor misapplied the permission check requiring only COLLECT_CLIENT (usually assigned to the "investigator" role) instead of the "DELETE_RESULTS" permission (usually only assigned to "administrators"). |
| CVE-2026-64954 | Velociraptor allows scheduling new collections via VQL queries in notebooks. For a user to schedule a new collection, they require the COLLECT_CLIENT permission. However, this is not enforced when the user can run a VQL query which resets the authorization provider.
This allows a user who can run arbitrary VQL (usually with the "analyst" role) to launch new collections (usually requires the "investigator" role). This vulnerability is an escalation from an analyst to investigator role. |
| CVE-2026-64955 | When Microsoft Excel imports a CSV file, it executes cells beginning with certain characters as formulas, giving such CSV files arbitrary execution.
Velociraptor fails to sanitize such cells when exporting to CSV from various places such as the GUI, offline collector or data exports.
It is not clear if the vulnerability is actually in Microsoft Excel treating a CSV data file as executable content, or if Velociraptor should be sanitizing the data to prevent Excel from executing it. However, since this is such a common use case for Velociraptor we decided to highlight it in an advisory. |
| CVE-2026-65370 | ServiceTalk HTTP/1.x incorrectly handles malformed Transfer-Encoding which could result in request smuggling attacks. This vulnerability is addressed in servicetalk version 0.42.65. |
| CVE-2026-66898 | A path traversal vulnerability in LXD allows an attacker to manipulate file system paths during backup import and restore operations. When importing or restoring a backup archive, LXD fails to validate instance and storage volume names contained within the archive metadata. An attacker can exploit this flaw by supplying a crafted backup archive with malicious instance or volume names containing path traversal sequences, potentially allowing file access or overwriting outside the designated restore directory. |
| CVE-2026-67282 | Joomla Extension - fabrikar.com - Unauthenticated remote code execution in Fabrik < 4.6.8 - An unauthenticated attacker could execute arbitrary code by using the frontend listfilter model. |
| CVE-2026-67283 | Joomla Extension - tabaoca.org - Improper ACL implementation allows file operations in Cotton Cloud < 2.0.2 - Unauthenticated users could perform various file-related operations (read, delete, overwrite, re-assign permissions) on every file managed within the extension. |
| CVE-2026-67284 | Joomla Extension - tabaoca.org - Improper ACL implementation allows file operations in Cotton Cloud < 2.0.3 - Authenticated users could perform various file-related operations (read, delete, overwrite, re-assign permissions) on files owned by other users. |
| CVE-2026-67285 | Joomla Extension - joomshaper.com - Unauthenticated arbitrary local PHP file inclusion in SP Page Builder < 6.8.0 - An unauthenticated attacker can perform includes to arbitrary PHP files that are accessible by the system. |
| CVE-2026-67286 | Joomla Extension - joomshaper.com - Unauthenticated arbitrary directory creation and file write in SP Page Builder < 6.8.0 - An unauthenticated attacker can create arbitrary directories and files with a predefined name. |
| CVE-2026-67287 | Joomla Extension - joomshaper.com - Unauthenticated comment creation in SP Page Builder < 6.8.0 - An unauthenticated attacker can create comments on instances with disabled guest commenting by overriding the setting in question with user supplied input. |
| CVE-2026-68752 | A Project Resource Manager may gain broader administrative privileges under specific conditions. |
| CVE-2026-68753 | An unauthenticated user may access restricted Artifactory content when a credentialed remote repository is configured in a specific way. |
| CVE-2026-68754 | A repository publisher without delete permission may modify protected package content under specific conditions. |
| CVE-2026-68755 | A bundle writer may create misleading release promotion information under specific conditions. |
| CVE-2026-68756 | A party with write access to stored session data may affect JFrog Artifactory under specific conditions. |
| CVE-2026-68757 | A user with access to a valid SAML response may impersonate another user under specific conditions. |
| CVE-2026-68758 | A low-privileged authenticated user may access restricted support information under specific conditions. |
| CVE-2026-68759 | A holder of a valid integration credential may impersonate other users under specific conditions. |
| CVE-2026-68760 | An unauthenticated user may bypass authentication under specific cache conditions. |
| CVE-2026-68968 | Apache Airflow's Backfill API authorized a request against a Dag id supplied by the caller whenever the `backfill_id` path segment failed to parse. The authorization dependency parsed it with `int()` while the route handler parsed it as pydantic's `NonNegativeInt`, which accepts values `int()` rejects (`1.0` coerces to `1`); FastAPI resolves dependencies before endpoint validation, so the two acted on different Dags. An authenticated user holding edit permission on any single Dag could therefore read, pause and cancel backfills belonging to any other Dag, including moving another Dag's queued runs to `failed`. No non-default configuration is required and backfill ids are sequential, so finding a target is trivial. Users are advised to upgrade to apache-airflow 3.3.1 or later, which parses the backfill id with the same type the routes declare. |
| CVE-2026-68969 | Apache Airflow wrote Variable values and Connection `extra` contents to the audit log in cleartext when they were submitted through the bulk endpoints (`PATCH /api/v2/variables` and `PATCH /api/v2/connections`). The audit-log masking recognised only top-level request fields, and a bulk request nests its entities two levels below, so no masking was applied to them. Any authenticated user with audit-log read access -- who need not hold Variables or Connections read at all -- could recover those secrets verbatim, and the Connection `extra` copy is stored unencrypted in the log while the connection table encrypts it. The Airflow UI's *Import Variables* action posts to this endpoint, so an ordinary operator import wrote every secret in the file to the log. This is a different code path from CVE-2026-50204: that fix shipped in 3.3.0 and covers the single-entity endpoints only, so deployments that upgraded in response to that advisory remain affected and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
| CVE-2026-68970 | Apache Airflow's Task SDK did not mask the contents of a Variable whose JSON value is a list, so secrets stored in that shape appeared in cleartext in task logs and in the Rendered Templates UI. Masking was applied only when the deserialized value was a string or a dict; a list at the top level matched neither and was returned unmasked. Any authenticated user able to read the logs or rendered templates of a task that references such a Variable could recover the values, with no special configuration required. This is the list-shaped counterpart of CVE-2026-59244, whose fix covered the dict case only, so deployments that upgraded in response to that advisory remain affected and must upgrade again. Users are advised to upgrade to apache-airflow 3.3.1 or later. |
| CVE-2026-69105 | An unauthenticated attacker may cause untrusted package content to be cached under specific conditions, potentially affecting artifact integrity and availability. |
| CVE-2026-69106 | A low-privileged user may poison cached artifact metadata under specific conditions, potentially causing consumers to retrieve untrusted content. |
| CVE-2026-69107 | An unauthenticated user may access restricted artifacts in JFrog Artifactory under specific conditions. |
| CVE-2026-70465 | A buffer copy without checking size of input ('classic buffer overflow') vulnerability in Fortinet FortiClientWindows 7.4.0 through 7.4.3, FortiClientWindows 7.2.0 through 7.2.11 may allow an unauthenticated attacker in a position to alter or craft DNS responses to the targeted host to execute arbitrary code via malicious packets. |
| CVE-2026-70466 | A incomplete list of disallowed inputs vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.2, FortiWeb 7.6.0 through 7.6.5, FortiWeb 7.4 all versions, FortiWeb 7.2 all versions, FortiWeb 7.0 all versions may allow attacker to improper access control via <insert attack vector here> |
| CVE-2026-70467 | A server-side request forgery (ssrf) vulnerability in Fortinet FortiSIEM 7.5.0, FortiSIEM 7.4.0 through 7.4.2, FortiSIEM 7.3.0 through 7.3.5, FortiSIEM 7.2 all versions, FortiSIEM 7.1 all versions, FortiSIEM 7.0 all versions, FortiSIEM 6.7 all versions, FortiSIEM 6.6 all versions, FortiSIEM 6.5 all versions may allow attacker to execute unauthorized code or commands via <insert attack vector here> |
| CVE-2026-70468 | A authentication bypass using an alternate path or channel vulnerability in Fortinet FortiManager 7.6.1, FortiManager 7.4.3 through 7.4.5, FortiManager 7.2.5 through 7.2.9, FortiManager Cloud 7.6.1, FortiManager Cloud 7.4.3 through 7.4.5, FortiManager Cloud 7.2.5 through 7.2.9 may allow attacker to improper access control via <insert attack vector here> |
| CVE-2026-70547 | An authenticated user without repository read permission may access package metadata under specific conditions. |
| CVE-2026-70560 | Ultimate POS (Stock Management & Point of Sale) contains a stored cross-site scripting vulnerability that allows low-privileged authenticated attackers to inject arbitrary HTML and script markup by setting a malicious payload in the user first-name field during account creation. Attackers with a low-privileged role such as Cashier can submit a leave request through the HRM/Leave module, causing the unsanitized first-name markup to execute in the browser session of any higher-privileged user who views the leave-application notification pane, enabling cross-user session compromise within the admin origin. |
| CVE-2026-71193 | In OpenStack Designate before 22.0.1, zone creation checks (_is_subzone, _is_superzone, and the duplicate-zone DB constraint) are scoped to the target pool only. An authenticated user can bypass these checks by scheduling a zone to a different pool via the AttributeFilter scheduler, creating an overlapping zone that conflicts with another tenant's zone. This enables cross-tenant DNS hijack (redirecting traffic to attacker-controlled IPs) and DNS denial of service (NODATA responses). Exploitation requires a multi-pool deployment with AttributeFilter enabled in scheduler_filters, which is a non-default but documented and supported configuration for self-service tiering. |
| CVE-2026-71194 | In OpenStack Designate before 22.0.2, the mDNS handler performs pool-blind lookups when resolving record queries and NOTIFY requests. When two zones with the same name exist across different pools, the lookup fails with a deterministic error, causing the handler to return REFUSED for all DNS queries through that path. The _handle_notify path is exploitable via a single unauthenticated UDP packet. This is independently reachable through the cross-tenant zone overlap described in a different recent CVE, and also affects legitimate same-tenant cross-pool configurations. BIND9 views do not mitigate this issue as mDNS is a shared service upstream of any view configuration. |
| CVE-2026-71408 | A allocation of resources without limits or throttling vulnerability in Fortinet FortiOS 7.6.0 through 7.6.6, FortiOS 7.4 all versions, FortiOS 7.2 all versions may allow attacker to denial of service via <insert attack vector here> |
| CVE-2026-71846 | A flaw was found in insights-client. The component's ServiceAccount is bound to a ClusterRole granting cluster-wide secrets get, list, and watch permissions, while the code only requires access to a single specific Secret. This excessive privilege means that a compromise of the insights-client pod or ServiceAccount token would grant an attacker read access to all Secrets across the hub cluster, including managed-cluster kubeconfigs and other sensitive credentials. |
| CVE-2026-72508 | A flaw was found in the multicloud-operators-subscription component of Red Hat Advanced Cluster Management (RHACM). This vulnerability allows a namespace-admin tenant to perform a confused-deputy attack by creating Subscription Custom Resources (CRs) that leverage a highly privileged ServiceAccount (SA). This enables the tenant to deploy arbitrary cluster-scoped resources, leading to privilege escalation and potential arbitrary code execution across the cluster. |
| CVE-2026-72526 | A flaw was found in the multicloud-integrations component. The Application propagation controller processes the `ocm-managed-cluster` annotation from an Application Custom Resource (CR) without proper validation. A tenant with permissions to create Applications on the hub cluster can exploit this to target arbitrary managed clusters. This can force ArgoCD on the spoke clusters to synchronize attacker-controlled manifests, leading to arbitrary code execution or privilege escalation on those clusters. |
| CVE-2026-72786 | Craft CMS versions before 5.10.8 contain an authentication bypass vulnerability in the elements/save action that allows authenticated users to change passwords without verification. Attackers with edit users permission can reset any user's password including administrators by exploiting the unprotected newPassword field in the User element save flow. |
| CVE-2026-72787 | Craft CMS versions before 5.10.8 contain a stored cross-site scripting vulnerability in the control panel where draft names are rendered without HTML encoding in element chips and cards. A low-privilege user who can create element drafts can inject malicious JavaScript that executes in the browser of any higher-privileged user viewing the affected element, allowing account creation and other authenticated actions. |
| CVE-2026-73300 | Budibase is an open-source low-code platform. Prior to 3.40.0, the MySQL integration component in Budibase is configured with multipleStatements: true, enabling execution of multiple SQL statements in a single query. Attackers can inject malicious SQL commands through user input fields, leading to complete database compromise. This vulnerability is fixed in 3.40.0. |
| CVE-2026-73301 | Budibase is an open-source low-code platform. Prior to 3.39.25, the GET /api/global/groups endpoint in packages/worker/src/api/routes/global/groups.ts omitted auth.builderOrAdmin, allowing an authenticated BASIC role user to enumerate tenant groups, role mappings and user memberships, builder permissions, and default-group flags. The disclosure exposes the tenant access-control structure to users who are not builders or administrators. This issue is fixed in version 3.39.25. |
| CVE-2026-73303 | Budibase is an open-source low-code platform. Prior to 3.40.0, POST /api/v2/email on account.budibase.app accepted a client-controlled accountId without binding it to the authenticated session, while checking only currentEmail. An authenticated attacker who obtains a victim account identifier can start the email-change workflow for the victim, receive and submit the verification code through POST /api/v2/email/verification, move the victim email to an attacker-controlled address, and complete a password reset as the victim. This issue is fixed in version 3.40.0. |
| CVE-2026-73306 | Budibase is an open-source low-code platform. Prior to 3.39.25, POST /api/global/auth/:tenantId/login incremented the failure counter in packages/worker/src/api/controllers/global/auth.ts only for existing users, while packages/worker/src/middleware/emailLockout.ts returned X-Account-Locked and Retry-After only for locked identifiers. An unauthenticated attacker could compare the response after repeated failures to enumerate valid email addresses and temporarily lock valid accounts. This issue is fixed in version 3.39.25. |
| CVE-2026-73307 | Budibase is an open-source low-code platform. Prior to 3.39.4, uploadUrl in packages/server/src/utilities/fileUtils.ts used a bare server-side fetch for string attachment values passed by processAttachments in packages/server/src/sdk/workspace/ai/helpers/rows.ts. A builder with the AI table-generation feature could cause an attachment value to reference an internal service or cloud metadata endpoint, and the response would be stored as an attachment without fetchWithBlacklist validation. This issue is fixed in version 3.39.4. |
| CVE-2026-73308 | Budibase is an open-source low-code platform. Prior to 3.39.25, packages/server/src/api/controllers/automation.ts returned automation test results containing trigger.outputs.user.oauth2, broadcast BuilderSocketEvent.AutomationTestProgress to the app room, and stored progress in packages/server/src/automations/testProgress.ts without user scoping. A co-builder could receive or poll another SSO-authenticated builder test and obtain OAuth2 access and refresh tokens. The fix adds sanitizeAutomationTestResult and isolates progress by user. This issue is fixed in version 3.39.25. |
| CVE-2026-73325 | Fujitsu Research's OneCompression library 1.2.0 contains an unsafe deserialization vulnerability that allows attackers to execute arbitrary code by supplying a crafted model.pt checkpoint file, as QuantizedModelLoader.load_quantized_model_pt() unconditionally calls torch.load with weights_only=False, invoking Python's pickle machinery during deserialization. Attackers can embed malicious __reduce__ methods in a crafted model checkpoint to execute arbitrary Python code, including system commands, when the library loads the file from a caller-selected model directory. |
| CVE-2026-73326 | CamaleonCMS contains a missing authorization vulnerability that allows any authenticated low-privileged user to access and modify plugin settings by reaching four unprotected plugin-administration endpoints without administrator-level authorization. Attackers can manipulate plugin configuration parameters at runtime across the attack, front_cache, cama_meta_tag, and cama_contact_form plugins to alter cached page behavior, modify public meta-tag output, or reconfigure contact forms, enabling account takeover when chained with stored cross-site scripting through the contact form's before_html field. |
| CVE-2026-73327 | Joomla 6.1.1 contains a path traversal vulnerability in the com_joomlaupdate extension that allows a Super User to be induced into extracting a crafted archive containing directory traversal sequences or absolute paths in ZIP entry filenames. Attackers can supply malicious ZIP entry names with parent-directory segments or absolute paths to the extract.php extraction routine, causing files to be written outside the intended destination root and enabling persistent remote code execution via planted PHP files. |
| CVE-2026-73329 | CamaleonCMS contains a stored cross-site scripting vulnerability that allows authenticated low-privileged users to execute arbitrary JavaScript in an administrator's browser by injecting unsanitized HTML payloads into the post title parameter during draft creation. Attackers can submit a malicious HTML payload as a draft title through the drafts creation endpoint, which is persisted to the database without escaping and later rendered as raw HTML in the admin drafts listing, enabling administrator session compromise, cookie theft, and forged authenticated requests. |
| CVE-2026-73330 | CamaleonCMS 2.9.1 contains a server-side template injection vulnerability that allows authenticated administrators to execute arbitrary commands by embedding ERB tags in the email parameter of the test_email settings action, which are evaluated when an SMTP rejection reflects the recipient address back in the exception message rendered as an inline ERB template. Attackers can submit a crafted email parameter containing ERB expressions through the admin settings test_email endpoint, causing the Rails inline template renderer to evaluate attacker-controlled Ruby code and achieve arbitrary command execution as the Rails process user. |
| CVE-2026-73331 | CamaleonCMS 2.9.1 contains an authenticated SQL injection vulnerability that allows authenticated attackers with post creation or editing privileges to submit a crafted slug value containing SQL syntax that the database backend evaluates as part of an inadequately parameterized query. Attackers can supply malicious slug payloads using boolean- or union-style blind SQL injection techniques to extract sensitive data from the underlying SQLite database, including administrative credentials and configuration values stored in application tables. |
| CVE-2026-73332 | CamaleonCMS contains a stored cross-site scripting vulnerability in the cama_contact_form plugin that allows low-privileged authenticated attackers to inject arbitrary HTML by submitting unsanitized content to the before_html field through the contact form edit endpoint, which lacks proper authorization controls. Attackers can persist malicious script payloads into the database that execute in victims' browsers when the contact form loads, enabling cookie theft, forged authenticated requests against the admin interface, and session takeover of viewing users. |
| CVE-2026-73374 | A stored cross-site scripting (XSS) vulnerability existed in Vulnerability-Lookup in the render_tag_badges Jinja filter used to display reference tags associated with vulnerability records.
Values from containers.cna.references[].tags[] were directly interpolated into HTML badge elements and the resulting string was wrapped in markupsafe.Markup. Because Markup marks the generated content as safe, Jinja's automatic HTML escaping was bypassed.
An authenticated user with permissions to create or modify vulnerability records, such as a user holding the vulnerability:create or vulnerability:modify permission, could submit a crafted reference tag through the CNA API containing arbitrary HTML or JavaScript-capable markup.
The malicious value would subsequently be stored as part of the vulnerability record. When another user visited the corresponding public /cve/<id> or /vuln/<id> page, the crafted tag would be rendered as HTML in the viewer's browser. This could result in JavaScript execution in the security context of the Vulnerability-Lookup application.
Successful exploitation could allow an attacker to perform actions in the context of a victim, access information available to the victim's browser session, or modify page content. As the affected vulnerability pages can be accessed publicly, exploitation may affect users who are not authenticated.
The issue was corrected by applying markupsafe.escape() to each reference tag before inserting it into the HTML badge markup, while retaining Markup only for the static HTML scaffolding. |
| CVE-2026-73405 | An authorization bypass vulnerability in Vulnerability-Lookup allowed inactive or unconfirmed accounts to subscribe to Server-Sent Events (SSE) streams through the /pubsub/subscribe/<topic> endpoint.
The token_required decorator used by the Pub/Sub interface authenticated requests solely by matching the X-API-KEY header against an existing user API key. Unlike the REST API authentication mechanism, it did not verify the account's is_active and is_confirmed state.
Because the self-registration process issues an API key before account confirmation is completed, an attacker could create an account and immediately use the resulting API key to access Pub/Sub topics that should only be available to active, confirmed users. This could expose stream events that would otherwise be inaccessible through the REST API, including newly submitted or not-yet-moderated data such as comments.
The vulnerability results from inconsistent authorization enforcement between the REST API and the SSE streaming interface.
The patch corrects the issue by requiring accounts to be both active and confirmed before permitting access to Pub/Sub streams, bringing the SSE authorization boundary in line with the REST API. |
| CVE-2026-73406 | Budibase is an open-source low-code platform. Prior to 3.39.32, GET /api/global/users/tenant/:id was listed in PUBLIC_ENDPOINTS in packages/worker/src/api/index.ts, and tenantUserLookup returned a full PlatformUser document. An unauthenticated caller could query an email or user identifier, distinguish existing users from missing users, and obtain tenant identifiers, user identifiers, email addresses, SSO identifiers, and document revision metadata. This issue is fixed in version 3.39.32. |
| CVE-2026-73407 | Budibase is an open-source low-code platform. Prior to 3.40.1, RestIntegration._req in packages/server/src/integrations/rest.ts attached credentials from getAuthHeaders and defaultHeaders without requiring the final request destination to match the datasource origin. An unauthenticated caller of a PUBLIC POST /api/v2/queries/:queryId query could supply an absolute or parameterized path to an attacker-controlled host and receive the stored bearer, basic, or static-header credentials. This issue is fixed in version 3.40.1. |
| CVE-2026-73409 | Budibase is an open-source low-code platform. Prior to 3.40.1, packages/server/src/integrations/mongodb.ts passed builder-controlled tlsCertificateKeyFile and tlsCAFile values directly to MongoClient on Budibase Cloud. A builder could submit absolute server paths through /api/datasources/verify and distinguish readable existing files from missing files by comparing the driver error, exposing a filesystem existence and readability oracle on the shared server. This issue is fixed in version 3.40.1. |
| CVE-2026-73411 | Shescape is a simple shell escape library for JavaScript. Prior to 2.1.14 and 3.0.1, getEscapeFunction in src/internal/unix/dash.js fails to escape ~ after : or = when applications use the escape or escapeAll APIs on Unix with shell set to dash, or with shell set to true when Dash is the default, and interpolate the result into an assignment prefixed to a command. An attacker who controls the input can supply a value such as :~ to disclose the home-directory path and may change the location on which the command operates. This issue is fixed in versions 2.1.14 and 3.0.1. |
| CVE-2026-73412 | Shescape is a simple shell escape library for JavaScript. Prior to 2.1.14 and 3.0.1, this impacts users of Shescape on Unix systems that explicitly configure shell to Zsh, or true when the default shell is Zsh, using the escape and escapeAll. The Zsh options EXTENDED_GLOB and MAGIC_EQUAL_SUBST exacerbate the problem. In certain case, an attacker can leverage home directory expansion and extended glob syntax to obtain lists of files and directories on the system. Depending on what the command does, this may be used to leak more information. This issue is fixed in versions 2.1.14 and 3.0.1. |
| CVE-2026-73413 | Shescape is a simple shell escape library for JavaScript. From 2.1.11 until 2.1.14 and 3.0.1, the flag-protection loop in compose in src/internal/compose.js repeatedly joins and slices flag fragments when flagProtection is enabled, which is the default, making processing quadratic in input size across the escape, escapeAll, quote, and quoteAll APIs. An attacker who can supply a large untrusted input containing many flag fragments can consume CPU and cause denial of service. This issue is fixed in versions 2.1.14 and 3.0.1. |
| CVE-2026-73414 | Shescape is a simple shell escape library for JavaScript. Prior to 2.1.14 and 3.0.1, getEscapeFunction in src/internal/win/cmd.js does not escape `(` and `)` when applications use the escape or escapeAll APIs on Windows with shell set to cmd.exe, or with shell set to true when CMD is the default. An attacker-controlled argument can break out of a parenthesized CMD construct and inject shell syntax depending on the original command, resulting in arbitrary command execution. This issue is fixed in versions 2.1.14 and 3.0.1. |
| CVE-2026-73415 | jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. Prior to 4.5.10 and 4.6.2, in packages/imageviewer/src/widget.ts, JupyterLab's ImageViewer uses URL.createObjectURL for a specially crafted SVG image and revokes the blob URL too early, allowing the image to retain an executable same-origin context when it is opened through the image viewer and then opened in a new browser tab. The resulting cross-site scripting can be used to execute arbitrary code on the JupyterLab server. This issue is fixed in versions 4.5.10 and 4.6.2. |
| CVE-2026-73418 | NextAuth.js provides authentication for Next.js. Prior to @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, the exported getToken() helper in the next-auth/jwt and @auth/core/jwt modules can throw an uncaught exception when it reads a malformed Authorization: Bearer header. When no session cookie is present, getToken() URL-decodes the bearer value before validating it, and malformed percent encoding causes decodeURIComponent() to throw instead of treating the token as invalid. Because getToken() is commonly called in API routes, middleware, and server-side request handlers, a single unauthenticated request can trigger an unhandled exception in code paths that authenticate requests, causing a per-request denial of service without exposing tokens, sessions, or other data and without bypassing authentication. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| CVE-2026-73419 | NextAuth.js provides authentication for Next.js. Prior to@auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32, Auth.js stores the OAuth/OIDC anti-CSRF checks state, nonce, and the PKCE verifier in global cookies that are not bound to the provider that created them. On callback, a check value minted during a sign-in started with one provider can satisfy the callback for a different provider because the stored cookie is not verified against the callback provider's identity, including the provider ID, issuer, client ID, or redirect URI. In a multi-provider application that permits account linking while logged in, when one provider's authorization request is observable and a target provider callback can be satisfied without a PKCE verifier, an attacker can lure a victim into starting a legitimate same-origin flow and link the attacker's target-provider account to the victim's Auth.js user. The linked provider grants the attacker persistent sign-in to the victim's account, while cross-site request forgery alone is insufficient. This issue is fixed in @auth/core 0.41.3 and next-auth 4.24.15 and 5.0.0-beta.32. |
| CVE-2026-73422 | Astro is a web framework for content-driven websites. From 2.9.0 until 7.1.0, Astro's server-side View Transition CSS generator interpolates animation properties into an inline style element without escaping them for CSS and HTML contexts. An attacker-controlled View Transition animation value such as duration can terminate the generated style element and inject arbitrary HTML or JavaScript. The affected code is packages/astro/src/runtime/server/transition.ts; renderTransition passes sheet.toString() into markHTMLString(), while addAnimationProperty serializes duration through toTimeValue() and also handles easing, direction, delay, fillMode, and name. Exploitation requires an on-demand or server-rendered route to pass attacker-controlled data into a View Transition animation definition and can execute arbitrary JavaScript in the affected application's origin, allowing access to sensitive page data and authenticated actions available to the victim. This issue is fixed in version 7.1.0. |
| CVE-2026-73423 | Astro is a web framework for content-driven websites. From 7.0.0 until 7.0.6, the composable astro/hono pipeline installs security.checkOrigin only through the middleware() primitive, while actions() and pages() can dispatch to user code independently. Mounting actions() before middleware(), as in the examples/advanced-routing example and Cloudflare Hono documentation, allows cross-origin form-encoded action requests to execute before the origin check, and using pages() without middleware() drops the check for on-demand endpoints and pages. The flaw enables blind write-only cross-site request forgery using the victim's cookies against ActionHandler.handle and PagesHandler.handleWithErrorFallback when manifest.checkOrigin is enabled; the attacker can trigger a state-mutating action or endpoint handler but cannot read the cross-origin response. The default non-composable astro() pipeline is not affected. This issue is fixed in version 7.0.6. |
| CVE-2026-73425 | Astro is a web framework for content-driven websites. Prior to 8.1.2, the Astro Netlify adapter converts each image.remotePatterns entry into a regular expression written to .netlify/v1/config.json under images.remote_images for Netlify's Image CDN allowlist. In packages/integrations/netlify/src/index.ts, remotePatternToRegex() escapes dots in hostname values but interpolates literal pathname values without escaping regular expression metacharacters such as ., +, ?, (, and [, so a restrictive pathname such as /img/v1.0/file also matches metacharacter-adjacent paths, including paths that cross a segment. Netlify enforces the generated regular expression directly and Astro's matchPattern() helper does not revalidate the request, allowing optimization of images on an already-allowed host that the declared pathname was intended to exclude. This issue is fixed in version 8.1.2. |
| CVE-2026-73427 | Trix is a what-you-see-is-what-you-get rich text editor for everyday writing. Prior to 2.1.18, Trix is vulnerable to cross-site scripting when a crafted application/x-trix-document JSON payload is dropped into an editor using the fallback Level0InputController, such as an embedded WebView without Input Events Level 2 support. The StringPiece.fromJSON method trusts href attributes from the JSON payload without sanitization, allowing a draggable element containing a javascript: URI to bypass DOMPurify sanitization and inject executable JavaScript into the DOM. Exploitation requires the victim to drag and drop attacker-controlled content, and server-side HTML sanitization can neutralize the payload on save. This issue is fixed in version 2.1.18. |
| CVE-2026-73429 | Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| CVE-2026-73430 | Russh is a Rust SSH client & server library. Prior to 0.62.4, an unauthenticated SSH client can cause a denial of service by sending SSH_MSG_KEX_ECDH_INIT with a 32-byte all-zero Q_C value. Curve25519Kex::server_dh in russh/src/kex/curve25519.rs accepts the all-zero peer public value and computes an all-zero shared secret, after which compute_exchange_hash calls encode_mpint in russh/src/kex/mod.rs and indexes beyond the end of the input while skipping leading zero bytes. The resulting panic occurs before authentication and terminates the server key-exchange task. This issue is fixed in version 0.62.4. |
| CVE-2026-73431 | Vulnerability-Lookup contains an
authentication weakness in its account activation and password-recovery
mechanism. Activation and recovery links were generated using stateless
signed tokens containing only the user's login. Although the token
signature and age were validated, the application did not track whether a
token had already been successfully used. As a result, a captured
activation or password-recovery link remained valid for the entire
configured TOKEN_VALIDITY_PERIOD, even after the associated password had been changed.
An attacker who obtains a valid
activation or recovery token could therefore replay it multiple times
during its validity period to set a new password and repeatedly take
control of the affected account. In addition, tokens were not bound to a
specific purpose, allowing the same token mechanism to be used across
activation and recovery workflows. The patch introduces purpose-bound
tokens and a random nonce whose SHA-256 digest is stored with the user
account. The nonce is invalidated after a successful password change,
making tokens single-use, while issuing a new token invalidates any
previously issued token. The password-setting operation now explicitly consumes the token before committing the account change.
Successful exploitation requires
the attacker to obtain a currently valid activation or recovery link,
but does not require knowledge of the victim's existing password or an
authenticated session. |
| CVE-2026-73432 | Vulnerability-Lookup contains a server-side request forgery (SSRF) vulnerability in the remote-instance synchronization functionality. Remote instance addresses were validated only for basic URL syntax before being stored, while the synchronization worker later dereferenced these addresses using requests.get() with automatic redirect handling and without enforcing network-boundary restrictions.
An authenticated administrator with the admin:access permission could configure a remote instance whose address points to an internal, loopback, link-local, or cloud metadata HTTP(S) service. When synchronization is performed, the Vulnerability-Lookup server would issue the request from its own network context. An attacker could also use a publicly accessible URL that redirects to an internal destination, because redirects were previously followed without revalidating the destination.
Successful exploitation could allow a privileged attacker to probe or interact with services that are accessible from the Vulnerability-Lookup server but not directly reachable by the attacker, including private network services or cloud instance metadata endpoints. The exact confidentiality, integrity, or availability impact depends on the services reachable from the application server.
The patch introduces a shared outbound URL policy that restricts remote instances to HTTP(S), rejects non-public IP addresses, resolves hostnames at request time, and manually validates each redirect destination before following it. The implementation explicitly blocks private, loopback, link-local, multicast, reserved, and unspecified addresses. |
| CVE-2026-73490 | Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. Prior to 2.25.2, Loofah's HTML5 sanitizer applies its local-reference restriction only to the xlink:href attribute on SVG use and feImage elements, while browsers also accept the plain href attribute. A crafted sanitized SVG can therefore reference an arbitrary same-origin external document; use may render external SVG content containing scripts or other dangerous content, and feImage may load external images for tracking. Applications that sanitize user-supplied SVG with Loofah's default allowlist are affected. This issue is fixed in version 2.25.2. |
| CVE-2026-73491 | Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: URIs whose scheme is split or prefixed with the HTML5 named whitespace character references 	 or 
. CGI.unescapeHTML leaves those references intact, so allowed_uri? reports the URL safe even though a browser decodes and strips the tab or line feed and executes the resulting javascript: URL. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| CVE-2026-73492 | Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: or vbscript: URIs whose scheme is split by semicolon-less numeric character references such as :, 	, 
, or 
. CGI.unescapeHTML leaves these references encoded, so allowed_uri? reports the URL safe even though a browser decodes an encoded colon or strips encoded whitespace and executes the resulting URI scheme. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| CVE-2026-73493 | Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. |
| CVE-2026-73499 | etcd is a distributed key-value store for the data of a distributed system. Prior to versions 3.5.33, 3.6.14, and 3.7.1, a user granted READ permission on a single exact key can use the Watch gRPC API with clientv3.WithFromKey() to receive watch events for every key lexicographically greater than or equal to the permitted key. In server/etcdserver/api/v3rpc/watch.go, the open-ended RangeEnd sentinel is rewritten before the RBAC permission check in server/auth/range_perm_cache.go function isRangeOpPermitted, causing the request to be treated as an exact-key watch. Range/Get and DeleteRange requests are not affected, and the issue affects only clusters with authentication enabled. This issue is fixed in versions 3.5.33, 3.6.14, and 3.7.1. |
| CVE-2026-73501 | kin-openapi is a Go project for handling OpenAPI files. Prior to 0.144.0, ValidationHandler.Load() in openapi3filter/validation_handler.go silently replaces a nil AuthenticationFunc with NoopAuthenticationFunc, which returns nil without checking credentials. This substitution causes every OpenAPI security requirement to be satisfied for unauthenticated requests when an application relies on ValidationHandler as its enforcement middleware. The no-op callback prevents the fail-closed ErrAuthenticationServiceMissing path from being reached and forwards the request to protected handlers that may require an API key, OAuth token, or another security scheme. This issue is fixed in version 0.144.0. |
| CVE-2026-73519 | WolfStack before 25.9.2 contains a hard-coded cluster-authentication secret compiled into every build and published as a constant in src/auth/mod.rs, allowing remote unauthenticated attackers to bypass authentication by supplying this value in the X-WolfStack-Secret header to the require_auth() gate without any session, API key, or user account. Attackers can reach an affected node's management port to enumerate all Docker and LXC containers on the host and execute arbitrary commands as root inside any container via the POST /api/containers/{runtime}/{id}/exec endpoint. |
| CVE-2026-7366 | IBM DataPower Gateway 11.0.0.0 through 11.0.0.1 and IBM DataPower Gateway 10.5.0.0 through 10.5.0.21 and IBM DataPower Gateway 10.6.0.0 through 10.6.0.9 allows a race condition that results in improper isolation of request state when handling the built‑in X‑Client‑IP header. Under concurrent request processing, X‑Client‑IP values may be contaminated across requests, enabling IP spoofing and disclosure of other clients’ IP addresses. |
| CVE-2026-9318 | tablib prior to 3.10.0 contains a stored cross-site scripting vulnerability in the HTML export functionality that allows attackers to execute arbitrary JavaScript by embedding malicious payloads in dataset titles, which are interpolated unsanitized into HTML output via the export_book method in the _html.py format handler. Attackers can rename worksheet sheets in imported files such as XLSX, ODS, XLS, or YAML with script payloads that are assigned to the Dataset title attribute and rendered unescaped inside an HTML h3 tag, leading to session hijacking, unauthorized administrative actions, and sensitive data exposure when the output is rendered in a browser. |