| CVE-2025-36939 | Multiple vulnerabilities exist in OpenThread's handling of MLE packets. An authenticated attacker on the same Thread network could send specially crafted packets to cause a denial of service. These issues include triggerable assertion failures and a stack-based buffer overflow. |
| CVE-2025-63080 | Firmware in KAON PG5298A and PG5298B routers allow an authenticated user to send crafted JSON-RPC requests and perform operations not possible via GUI, e.g. system file read or command execution.
This vulnerability has been fixed in firmware version: 3.0.82 for PG5298A and 4.0.82 for PG5298B. |
| CVE-2026-10582 | Hugo's security.http.urls allowlist is the only control on outbound fetches made by resources.GetRemote, and it inspects the URL text alone. CheckAllowedHTTPURL in config/security/securityConfig.go applies the configured pattern list and then re-checks a canonicalised form of an integer, hex or octal IPv4 host, but it never resolves the hostname and never inspects the address the HTTP client actually connects to. The client constructed in resources/resource_factories/create/create.go installs no dial-time hook, so no check occurs at connection time either. A hostname that resolves to a loopback, private or cloud-metadata address therefore satisfies the policy, and the response body is embedded in the generated site. An attacker who can supply a URL through content, for example a front-matter field or a CMS field, can make the build fetch an internal endpoint and publish the response in the static output, so the build artifact itself carries the data out. |
| CVE-2026-12554 | Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities. |
| CVE-2026-12555 | Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities. |
| CVE-2026-12556 | Potential security vulnerabilities have been identified in HP Easy Start for macOS, versions prior to 2.16.7.260722. These potential vulnerabilities may lead to escalation of privilege. HP is releasing updates to mitigate these potential vulnerabilities. |
| CVE-2026-13212 | The Zephyr virtio driver does not validate the descriptor-chain head id that the virtio device writes into the used ring. In virtio_isr() (drivers/virtio/virtio_common.c), the device-written vq->used->ring[idx].id is used directly as an index into vq->recv_cbs[] and vq->desc[], which are both allocated with exactly vq->num entries. recv_cbs[] holds {cb, opaque} callback entries, and the indexed callback pointer is then invoked as cbe.cb(cbe.opaque, used_len).
Because the id is consumed as a 16-bit value with no bound check, a malicious or compromised virtio backend (an untrusted hypervisor, or an untrusted hardware/peer-processor virtio device on a PCI or MMIO transport) can supply an id far beyond vq->num. This causes an out-of-bounds read of a {function pointer, argument} pair from heap memory beyond recv_cbs[], after which the driver calls that attacker-shaped pointer in the guest's interrupt context. No guest privileges or user interaction are required; the backend triggers it by writing the shared used ring and raising the queue interrupt.
The result is an arbitrary / attacker-influenced function-pointer call in the Zephyr guest, i.e. a control-flow-hijack primitive that can lead to code execution or, at minimum, a reliable crash. The fix rejects any used-ring id >= vq->num before indexing recv_cbs[]/desc[] or invoking the callback. This affects builds using CONFIG_VIRTIO with the PCI or MMIO transport. |
| CVE-2026-18349 | Improper protection against voltage and clock glitches vulnerability in Microchip SAMA5D4 allows Hardware Fault Injection.
This issue affects SAMA5D4. |
| CVE-2026-19685 | NetworkManager did not apply the private_user restriction to the 802-1x.ca-path and phase2-ca-path directory-valued connection properties. This incomplete fix for CVE-2025-9615 allows an unprivileged local user to point a private WPA-Enterprise (802.1X) connection profile's CA path at an attacker-controlled directory, bypassing server certificate validation and enabling credential theft via a rogue access point. |
| CVE-2026-19852 | NewSiteServer (NSS) developed by CyberTutor has an Arbitrary File Upload vulnerability. Unauthenticated remote attackers can upload arbitrary files, including malicious HTML files, thereby achieving effects similar to cross-site scripting. |
| CVE-2026-19853 | NewSiteServer (NSS) developed by CyberTutor has a Missing Authentication vulnerability. Unauthenticated remote attackers can exploit a specific functionality to send emails to anyone on behalf of the school. |
| CVE-2026-19874 | A heap-based buffer overflow vulnerability exists in Konami's Metal Gear Online 3, originating from improper validation of lobby data fields related to kicked players. The affected function processes a list of kicked player identifiers using the lobby data key "kick_num" to determine the number of entries, and individual kicked player IDs supplied via keys in the format "kicked_id_%i". The function does not validate that "kick_num" falls within the expected bounds. The game design limits matches to a maximum of 16 players, and the corresponding buffer for storing kicked player IDs is sized accordingly. If "kick_num" exceeds this limit, the function continues writing the provided player IDs past the end of the intended buffer and into adjacent memory regions. These adjacent regions contain Steam callback handler structures responsible for processing lobby data updates, lobby messages, and other related events. By supplying an oversized "kick_num" value and appropriate "kicked_id_%i" fields, an attacker can overwrite fields within the callback handler structures, including function pointers and callback argument values. Successful exploitation may enable control-flow hijacking, potentially allowing arbitrary code execution within the game process. |
| CVE-2026-28162 | Unauthenticated Cross Site Scripting (XSS) in Events Made Easy <= 3.2.5 versions. |
| CVE-2026-28165 | Unauthenticated Privilege Escalation in Digits <= 9.2 versions. |
| CVE-2026-28166 | Unauthenticated Cross Site Scripting (XSS) in Tourmaster <= 5.4.9 versions. |
| CVE-2026-28167 | Unauthenticated Arbitrary File Download in Super Forms <= 6.3.315 versions. |
| CVE-2026-30864 | Combodo iTop is a web-based IT service management tool. Prior to 3.2.3, iTop is vulnerable to Reflected Cross-Site Scripting (XSS) in the dashboard revert functionality. This issue has been fixed in version 3.2.3. |
| CVE-2026-32471 | Subscriber SQL Injection in ProLancer Element <= 1.4.8 versions. |
| CVE-2026-32476 | Unauthenticated Cross Site Scripting (XSS) in Brave Conversion Engine (PRO) <= 0.8.6 versions. |
| CVE-2026-32478 | Subscriber SQL Injection in WP Project Manager Pro <= 4.0.1 versions. |
| CVE-2026-39975 | Combodo iTop is a web-based IT service management tool. Prior to 3.2.3, unauthenticated users could delete the .readonly file on iTop instances, leading to code execution. This file, created during the setup process, prevents users from performing write actions. This issue has been fixed in version 3.2.3. |
| CVE-2026-40877 | Combodo iTop is a web-based IT service management tool. Prior to 3.2.3, iTop is vulnerable to PHP object injection in the user preference functionality, which can lead to remote code execution. This issue has been fixed in version 3.2.3. |
| CVE-2026-5006 | A vulnerability was identified in HashiCorp Vault and Vault Enterprise (“Vault”) such that an authenticated attacker may manipulate an identity value referenced by a templated policy path to gain unintended access to Vault paths.
An attacker who can control the referenced identity value may include slash ({{/}}) characters that Vault interprets as additional path segments when rendering the policy.
This vulnerability, CVE-2026-5006, was fixed in Vault Community Edition 2.0.4 and Vault Enterprise 2.0.4, 1.21.9, 1.20.14, and 1.19.20. |
| CVE-2026-55468 | Wagtail is an open source content management system built on Django. Prior to versions 7.0.9, 7.3.4, 7.4.3, and 8.0rc2 on their respective release lines, the internal Pages admin API returns page fields declared in api_fields without sufficient access control, allowing a user with Wagtail admin access to retrieve restricted draft and live page content. This issue is fixed in versions 7.0.9, 7.3.4, 7.4.3, and 8.0rc2. |
| CVE-2026-59295 | Micrometer-instrumented Apache HttpAsyncClient (4.x or 5.x) usage via MicrometerHttpClientInterceptor can leak memory unboundedly when asynchronous requests fail before receiving a response (e.g. connection resets or timeouts). Tracking state for these requests remains in memory indefinitely, and sustained failures lead to heap exhaustion and OutOfMemoryError crashes. |
| CVE-2026-59561 | Sakura Editor provided by Sakura Editor Development Community contains an OS command injection vulnerability. If a victim user is directed to edit a file in a crafted directory, arbitrary OS command may be executed on the user's PC when the user invokes "Open Terminal". |
| CVE-2026-59564 | An authentication bypass issue exists in communications between affected versions of the Zscaler Client Connector and the Zscaler Client Connector Portal. |
| CVE-2026-59565 | A remotely exploitable buffer overflow bug can cause a local and kernel denial-of-service attack on affected versions of Zscaler Client Connector on Windows. |
| CVE-2026-59567 | Multiple vulnerabilities on affected versions of Zscaler Client Connector allow local privilege escalation, giving an unprivileged user the ability to execute arbitrary code in a privileged context. |
| CVE-2026-59568 | Multiple vulnerabilities on affected versions of Zscaler Client Connector allow remote code execution, giving an unauthenticated, unprivileged user the ability to execute arbitrary code in the ZCC context. |
| CVE-2026-6017 | Firmware in KAON PG5298A and PG5298B routers allow an unauthenticated user to query a specific endpoint and acquire sensitive information such as a password to the administrative portal.
This vulnerability has been fixed in firmware version: 3.0.82 for PG5298A and 4.0.82 for PG5298B. |
| CVE-2026-63621 | Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Knative component
The Knative consumer in camel-knative maps inbound CloudEvent attributes onto Camel message headers. In binary content mode the HTTP-header path filters Camel-internal headers through KnativeHttpHeaderFilterStrategy, but in structured content mode (Content-Type application/cloudevents+json) the CloudEvent extension fields are read directly from the JSON body and every extension key is copied into the Exchange headers without applying any HeaderFilterStrategy (CloudEventProcessors, spec versions 1.0, 1.0.1 and 1.0.2). As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelHttpUri, CamelHttpPath, CamelFileName) via a structured-mode CloudEvent request, matched case-insensitively against Camel's header map. When a route forwards messages from a Knative consumer to a header-driven component such as camel-http or camel-file, the injected headers override configured values, enabling server-side request forgery (SSRF), path traversal or message-dispatch redirection depending on the route. This is an incomplete fix of the inbound header filtering previously added for the binary content-mode path, and is the same pattern addressed in camel-cxf/camel-knative (CVE-2026-47323), camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and the non-HTTP strategies (CVE-2026-40453).
This issue affects Apache Camel: from 3.15.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.4. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. The non-LTS releases 4.15.0 through 4.17.0 and 4.19.0 through 4.21.0 are affected but do not receive a maintenance fix; users on those versions should upgrade to 4.18.4 or 4.22.0. |
| CVE-2026-65053 | Horde IMP's AppleDouble MIME viewer writes an attacker-controlled attachment name into an HTML status block without escaping it. In lib/Mime/Viewer/Appledouble.php, _IMPrender() obtains the name of the data part with IMP_Contents::getPartName(), which returns the MIME part's own name parameter as supplied by the message, and passes it through sprintf into the text of an IMP_Mime_Status object. IMP_Mime_Status::__toString() concatenates each text entry directly into the surrounding table markup, so the value reaches the rendered page verbatim. A message crafted as multipart/appledouble whose data part carries markup in its name parameter therefore executes script in the context of any user who views it, and the payload persists in the mailbox. Exploitation requires no account on the target system, only the ability to send mail to a user. Version 7.2.0 escapes the value with htmlspecialchars(). The researcher additionally chains this flaw with the arbitrary file read of CVE-2026-58451, and reports that script running in an administrator's session can reach an application code-execution path. |
| CVE-2026-66610 | Unauthenticated Cross Site Scripting (XSS) in Urna <= 2.6.2 versions. |
| CVE-2026-66897 | A path traversal vulnerability in LXD's instance template processing allows an attacker with container edit permissions, or any user launching a crafted image, to overwrite arbitrary files on the host system as root. When processing target template paths specified in metadata.yaml, LXD validates the path against a confined os.Root directory handle but subsequently opens and creates the file using os.Create with an unconfined string path. This discrepancy between path resolution checks and file creation allows an attacker to escape directory confinement, overwrite root-owned host files, and achieve host root code execution. |
| CVE-2026-66908 | Improper Authentication vulnerability in Apache Camel Platform HTTP Main component.
This issue affects Apache Camel: from 4.8.0 before 4.22.0.
The camel-main embedded HTTP server can protect its endpoints with JWT authentication, configured through authenticationEnabled together with the JWT keystore properties. JWTAuthenticationConfigurer.buildJwtOptions returned null when neither jwtIssuer nor jwtAudience was configured, and the caller then skipped the JWTAuthOptions.setJWTOptions call entirely, so the Vert.x JWTAuth instance was built from the keystore alone. The result was that inbound tokens were checked only for signature and expiry: the iss and aud claims were not validated at all. Nothing signalled this - the server started normally and reported no warning - so a deployment configured the documented way silently enforced less than the operator believed it had enabled, and the component documentation itself presented signature and expiry checking as the default with issuer and audience as an optional extra. Both the application server and the management server were affected, because the omission was in each of the two configureAuthentication paths. Any unexpired token signed by any key the configured keystore trusts was therefore accepted, regardless of which issuer minted it or which audience it was intended for. How far that reaches depends on the trust set of the keystore: where the signing key belongs to a shared or multi-tenant identity provider, a token legitimately issued for an entirely different audience is accepted, while a keystore holding a dedicated signer narrows it to reuse of tokens minted for other services within the same trust domain. The jwtIssuer and jwtAudience options did not exist before 4.21.0, so on earlier releases there was no supported way to have these claims enforced at all.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. From 4.22.0 the server refuses to start when a JWT keystore is configured but neither jwtIssuer nor jwtAudience is set, naming the properties involved, and a deployment that genuinely wants signature and expiry validation only must say so explicitly with the new jwtAllowMissingIssuerAndAudience option, which defaults to false. This behaviour is fixed only on 4.22.0. The 4.14.9 and 4.18.4 releases do not change the default: they add the jwtIssuer and jwtAudience options so that operators on those maintenance lines can enforce the claims by configuration, and an installation that upgrades to 4.14.9 or 4.18.4 without also setting at least one of those two properties is still accepting any unexpired token signed by a trusted key. Users on 4.14.x or 4.18.x should therefore upgrade to 4.14.9 or 4.18.4 and then set jwtIssuer, jwtAudience, or both. Releases from 4.8.0 up to and including 4.21.x offer no way to enforce these claims and should be moved to a version that does. Independently of version, restrict the JWT keystore to the smallest possible trust set - ideally a signer dedicated to this service rather than a shared identity-provider key - and where a gateway already validates issuer and audience in front of the server, ensure it cannot be bypassed.
Notes:
The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-24281 refers to the various commits that resolved the issue, and has more details.
The fail-closed guard could not be backported. The jwtIssuer and jwtAudience options were themselves only introduced in 4.21.0 by CAMEL-23525, so on camel-4.18.x and camel-4.14.x there was nothing an operator could set to satisfy the requirement and the guard would have broken every JWT deployment on those branches with no remedy available. |
| CVE-2026-67204 | BookStack before 26.05.4 contains a broken access control vulnerability that allows authenticated API users with image-update or image-delete permissions to manipulate other users' avatars by exploiting missing content-type restrictions in the Image Gallery API endpoints. Attackers can supply a user avatar's ID to the API controller, which loads any image type without the web controller's gallery and drawio restrictions, and when the avatar's uploaded_to field matches a page ID accessible to the attacker, the authorization check passes allowing the attacker to rename, replace, or delete the target user's avatar without requiring user-management permission. |
| CVE-2026-71300 | Improper input validation vulnerability in Apache Camel Atmosphere Websocket component.
This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.
The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.
Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.*”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first. |
| CVE-2026-71364 | A path traversal vulnerability was found in AWX's project archive extraction. The project_archive action plugin extracts zip and tar archive members by joining the project directory path with the member filename without performing path normalization, boundary validation, or rejecting directory traversal sequences. A malicious archive containing members with path traversal components can write files to arbitrary locations on the execution node's filesystem outside the intended project directory. An attacker who controls the archive content, either through a compromised upstream source, a malicious archive URL, or a man-in-the-middle attack on a plain HTTP connection, can achieve arbitrary file writes as the user performing the extraction, potentially leading to remote code execution through mechanisms such as cron files, SSH authorized keys, or playbook content injection. |
| CVE-2026-75099 | Unauthenticated REST disclosure of certain content items in Apache Allura.
This issue affects Apache Allura: through 1.19.1.
Users are recommended to upgrade to version 1.20.0, which fixes the issue. |
| CVE-2026-75370 | An out-of-bounds read/write vulnerability in the MessageParser::parseECSSTCHeader component of SpaceDot AcubeSAT OBC software commit eaf90ec allows attackers to cause a Denial of Service (DoS) via supplying a crafted CAN message. |
| CVE-2026-75371 | An integer handling flaw in the cobs_decode function of SpaceDot AcubeSAT OBC software commit eaf90ec allows physically-proximate attackers with UART access to cause a Denial of Service (DoS) via a crafted input. |
| CVE-2026-75464 | OneNav 1.2.4 contains an authenticated arbitrary file deletion vulnerability via import_link(). |
| CVE-2026-75509 | joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to version 1.7.3, JWTClaimsRegistry applies membership matching to list-valued iss and sub claims, allowing an array-valued iss that contains the expected issuer to pass an intended equality check and enabling issuer-validation bypass. This issue is fixed in version 1.7.3. |
| CVE-2026-75542 | Incorrect Authorization vulnerability in the OAuth token endpoint in hexpm hexpm allows an API key holding the repositories permission to read another organization's private packages.
When an API key is exchanged for a token through the OAuth client_credentials grant, validate_scopes_against_key/2 in lib/hexpm_web/controllers/api/oauth_controller.ex admits a requested scope whenever the key carries the repositories permission and the scope string begins with repository:. The organization name is never resolved against the principal, and expand_repositories_scope/3 only rewrites the literal repositories scope, so an explicit repository:<name> passes through untouched. Both CDN edges authorize repository access from the token claim without querying the database, so the minted token is read access to that organization's private packages until it expires.
This issue affects hex.pm: from 2025-10-18 before 2026-08-24. |
| CVE-2026-75554 | Insufficient Session Expiration vulnerability in the OAuth token refresh grant in hexpm hexpm allows a user removed from an organization to keep reading its private packages.
expand_repositories_scope/3 in lib/hexpm/permissions.ex only rewrites the literal repositories scope, so an explicitly granted repository:<org> or docs:<org> scope passes through it untouched. The refresh grant re-derives a new token from the stored granted_scopes, which holds that expanded form, so every refresh reproduces the organization scope without revisiting membership. Because both CDN edges authorize repository access from the token claim without querying the database, an account removed from an organization retains read access for as long as it keeps refreshing, bounded by the 30 day refresh token lifetime rather than the 30 minute access token lifetime.
This issue affects hex.pm: from 2025-10-10 before 2026-08-24. |
| CVE-2026-75899 | fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version. |
| CVE-2026-76054 | Invocation of Process Using Visible Sensitive Information in Black Duck blackduck-c-cpp 1.0.17 through 3.0.6 allows an actor able to execute code within the scanned project's build to obtain the Black Duck API token via the ambient process environment, which is inherited by subprocesses launched during build capture and signature scanning. This applies only where the token is supplied through the BLACKDUCK_API_TOKEN or BD_HUB_TOKEN environment variable.
Upgrading does not remediate prior disclosure; any token supplied to an affected version through an environment variable should be rotated. |
| CVE-2026-76055 | Improper Neutralization of Special Elements used in an OS Command in the package manager component of Black Duck blackduck-c-cpp before 3.0.7 allows an actor able to create a file within the scanned build directory to execute operating system commands as the account running the scan.
Filesystem paths encountered while traversing the scanned directory are interpolated into command strings that are executed through a shell without quoting or escaping, so shell metacharacters within those paths are interpreted rather than treated as literal text. No control over the build command or the tool's configuration is required. |
| CVE-2026-76070 | Netis NC63 firmware through V3.0.0.3327 contains a stack-based buffer overflow vulnerability that allows unauthenticated remote attackers to overwrite saved stack state by submitting an oversized Base64-encoded password to the login handler in /bin/netis.cgi. Attackers can exploit the custom Base64 decoder's lack of output length validation against the fixed-size stack buffer to achieve remote code execution with root privileges, as the Boa web server executes the CGI environment as root. |
| CVE-2026-76071 | Netis NC63 firmware through V3.0.0.3327 contains a stack-based buffer overflow vulnerability that allows unauthenticated remote attackers to overwrite saved stack state by supplying an oversized destHost parameter to the ipFilterList=mod action in netis.cgi. Attackers can exploit widthless sscanf conversions that copy user-supplied input into fixed-size stack buffers before authentication is verified, achieving remote code execution as root due to the Boa web server executing the CGI environment with root privileges. |
| CVE-2026-76072 | The Continue CLI applies an incomplete denylist as its only barrier to destructive shell commands when running unattended. In headless mode and auto mode the default policy in extensions/cli/src/permissions/defaultPolicies.ts grants the Bash tool the allow permission, and permissionChecker.ts hard-blocks a command only when the terminal-security evaluator returns a disabled verdict, so isCriticalCommand in packages/terminal-security/src/evaluateTerminalCommandSecurity.ts is the sole control. Its dangerous-path test matches only /, /*, ~, ~/*, /usr, /etc, /bin and /sbin and their prefixes, so a recursive forced removal of /home, /root, /var, /opt or /srv is not disabled. The command line is parsed with shell-quote, which reduces $HOME to an empty token, so rm -rf $HOME also fails the dangerous-path test while the shell re-expands the variable when the command is spawned. find with -delete is rated high risk rather than disabled, and shred, wipefs, truncate and pkexec are not handled. Because the agent autonomously reads content it does not control, including fetched web pages, repository files and issue text, an indirect prompt injection in that content can cause an unattended run to destroy the invoking user's data. |
| CVE-2026-76073 | Label Studio does not scope the annotation detail endpoint to the requesting user's organization. AnnotationAPI in label_studio/tasks/api.py declares queryset = Annotation.objects.all() and provides no get_queryset override, so the default lookup retrieves any annotation by primary key. The view's permission_required entries name annotations.view, annotations.change and annotations.delete, and label_studio/core/permissions.py registers every permission with rules.is_authenticated, so the check is satisfied by any logged-in account and no object-level organization test runs. The sibling task endpoint does constrain its queryset with project__organization set to the requester's active organization, which is the boundary this path omits. Annotation identifiers are sequential integers, so an authenticated user of one organization can enumerate identifiers to read, modify and delete annotations belonging to other organizations on the same instance. The same unscoped queryset appears on AnnotationConvertAPI in the same file. |
| CVE-2026-76172 | fast-uri is a URI parser for Node.js. During parsing it runs a legacy decoding pass over the scheme component and never re-escapes the result, and serialization writes the scheme back out verbatim, unlike the host component which is re-escaped. As a result an input whose scheme carries percent-encoded slashes parses as a scheme with no authority, so the parsed host and error are both undefined, yet resolving or normalizing that same input emits a network-path reference whose authority is attacker-chosen and re-parses to that host. An application that allowlists on the parsed host, or treats a reference with no authority as safe to resolve against its base, gets the opposite of what it checked, giving an off-site redirect, server-side request forgery, or address-policy bypass. The legacy decoder also expands non-standard escape forms, widening the issue past upstream filters, and control characters in the scheme can reach the output as raw carriage return and line feed. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which reject a scheme that is not valid after decoding. Users should upgrade to a patched version. |
| CVE-2026-76836 | AzuraCast exposes the Liquidsoap custom configuration fields through an endpoint that does not require the permission guarding them. The backend_config property in backend/src/Entity/Station.php is annotated with GROUP_GENERAL, and PUT /api/station/{station_id}/profile/edit in backend/src/Controller/Api/Stations/ProfileEditController.php deserializes with that group while requiring only StationPermissions::Profile. AbstractArrayEntity::fromArray() then assigns every public property with no field-level permission check, so custom_config_top, custom_config, custom_config_pre_playlists, custom_config_pre_live, custom_config_pre_fade and custom_config_bottom are writable through it. ConfigWriter::writeCustomConfigurationSection() emits those values verbatim into the generated Liquidsoap .liq script, where the process.run() and process.exec() built-ins execute operating system commands when the backend restarts, which the built-in sync task triggers automatically once needs_restart is set. The dedicated endpoint for the same data, PUT /api/station/{id}/liquidsoap-config, requires StationPermissions::Broadcasting, so a station manager holding only the profile permission reaches configuration that the intended boundary reserves for broadcasting operators. |
| CVE-2026-76837 | Baserow interpolates a user's display name into the rich-text mention markup without HTML encoding. PATCH /api/user/account/ stores the first_name value verbatim, and the mention renderer in web-frontend/modules/core/editor/mention.js builds its element with a template literal that places the name into a data-label attribute and the element body unescaped. A name containing a double quote closes that attribute and the opening tag, so following markup lands in the element content. The result is rendered through v-html by the rich-text field components, so any rich-text cell mentioning the account executes the stored script for every workspace member who views the table, without a click. Any workspace member, at the lowest permission level, can set the name and reach every other member of the workspace, and the payload persists until the name is changed or the mentioning row is removed. Version 2.3.0 escapes the value before interpolation. |
| CVE-2026-76838 | Hi.Events validates a webhook destination only when it is registered, never when it is used. NoInternalUrlRule in backend/app/Validators/Rules/NoInternalUrlRule.php resolves the hostname with gethostbyname() and rejects private and reserved ranges, which any public hostname passes. At dispatch, WebhookDispatchService takes the stored URL and calls it through spatie/laravel-webhook-server without repeating the check, and backend/config/webhook-server.php sets no Guzzle options, so redirect following remains enabled by default. A destination that answers with a redirect to a loopback, private or cloud metadata address therefore causes the server to issue that request, and changing the hostname's DNS record after registration reaches the same result because no resolution is repeated. The response is not discarded: WebhookResponseHandlerService stores the body on the webhook log and WebhookLogResource returns it from the webhook logs endpoint, so the requester reads what the internal service replied rather than inferring it. Both event and organizer webhooks share the rule and the dispatch path. Version 1.11.1-beta revalidates at dispatch, pins the validated address, checks every redirect hop, and decodes IPv6 transition addresses that previously bypassed the filter. |
| CVE-2026-76841 | Xinference loads models with Hugging Face remote code execution unconditionally enabled, and before version 2.12.0 exposes no setting to disable it. Six loader call sites pass trust_remote_code=True as a literal or as an unconditional default: RerankModel._get_tokenizer in xinference/model/rerank/core.py, SentenceTransformerRerankModel.load in xinference/model/rerank/sentence_transformers/core.py, SentenceTransformerEmbeddingModel.load in xinference/model/embedding/sentence_transformers/core.py, FlagEmbeddingModel.load in xinference/model/embedding/flag/core.py, and two sites in xinference/model/llm/transformers/core.py where PytorchModel._sanitize_model_config and PytorchModel._get_components default the value to True. Because a caller with model launch access can register a model whose type is unknown and supply an arbitrary model path, the server reaches _auto_detect_type and then AutoTokenizer.from_pretrained, which imports and executes Python declared by the model directory's own tokenizer_config.json auto_map, running attacker-supplied code with the privileges of the worker process. Version 2.12.0 gates every site behind allow_trust_remote_code and the XINFERENCE_TRUST_REMOTE_CODE setting, permitting remote code only for bundled built-in models. |
| CVE-2026-76842 | The Mercado Pago Node.js SDK interpolates caller-supplied identifiers into API request paths without percent-encoding them, so characters that are structural in a URL survive into the outgoing request. The payment (get, capture, cancel), paymentRefund (create, total, list, get), advancedPayment (get, capture, cancel, update, updateReleaseDate) and disbursementRefund (create, createAll, listAll) clients build their path as a template literal, for example RestClient.fetch(`/v1/payments/${id}`, ...) in src/clients/payment/get/index.ts. A dot-dot or slash sequence in the identifier is normalised by the WHATWG URL parser and redirects the request to a different endpoint, and a question mark appends attacker-chosen query parameters, in both cases carrying the merchant's own access token. An application that forwards an identifier influenced by an untrusted party into one of these methods without an ownership check therefore allows that party to reach other resources within the merchant's token scope. The repository already contains the intended helper, encodePathParam in src/utils/path.ts, which pull request 451 applied to roughly 29 other clients while leaving these unchanged. |
| CVE-2026-76843 | The official Flair wheels for 0.15.0 and 0.15.1 still contain flair/models/clustering.py, whose ClusteringModel.load static method returns pickle.loads(joblib.load(str(model_file))) and so executes arbitrary Python while loading a model file. Loading a model supplied by an attacker therefore runs that attacker's code with the privileges of the loading process. This is the same sink and the same file as CVE-2024-10073, which records 0.15.0 as the fixed version on the basis that clustering support was dropped in that release; the module was removed from the documented API but remains present in the distributed artifact and reachable by importing flair.models.clustering directly, so the earlier record's fixed version does not hold for the shipped package. |
| CVE-2026-76844 | webpack-dev-middleware resolves a request to a local file in getFilenameFromUrl by testing the request pathname against a traversal guard and then slicing it at a fixed character offset. The guard, UP_PATH_REGEXP applied to path.normalize(`./${pathname}`), only matches ".." that stands as a whole path segment, while the containment test is the string comparison pathname.startsWith(publicPathPathname) and the file path is built as path.join(outputPath, pathname.slice(publicPathPathname.length)). When the configured publicPath has no trailing slash, a request such as GET /assets../.env against publicPath /assets yields the pathname /assets../.env, whose only dot-dot sits inside the segment "assets.." and so passes the guard, but the offset slice cuts within that segment and hands "../.env" to path.join, resolving one directory above outputPath. Reading a file from that path requires the middleware to be backed by the physical filesystem, which happens when writeToDisk is true or a custom outputFileSystem is supplied, since the default memfs volume holds only build output. Traversal depth is limited to a single directory because a separately delimited dot-dot segment is collapsed during URL parsing before the guard runs. The default publicPath value of "auto" resolves to "/" and is not affected. This is an incomplete fix for CVE-2024-29180: the guard and offset slice were introduced by that fix and are present in every release from 5.3.4, 6.1.2 and 7.1.0 onward. |
| CVE-2026-76845 | adm-zip 0.5.9 through 0.6.0 follows symbolic links at the extraction destination. Utils.sanitize in util/utils.js enforces containment by comparing only the string form of an archive entry name against the resolved extraction root, and Utils.writeFileTo opens the computed destination with fs.openSync(path, "w", 0o666), which resolves symbolic links and carries neither O_NOFOLLOW nor a pre-write fs.lstatSync check. When a path component at the destination already exists as a symbolic link pointing outside the extraction root, extractAllTo, extractAllToAsync and extractEntryTo write the entry contents through that link and then chmod its target, placing attacker-controlled content in a file outside the root without any traversal sequence appearing in the archive. Reaching the write requires overwrite to be enabled, because the preceding fs.existsSync check also resolves the link and otherwise declines. An attacker able to create a symbolic link inside a shared, reused or predictable extraction directory, such as a temporary directory or a continuous integration workspace, can overwrite any file the extracting process is permitted to write. |
| CVE-2026-76847 | act starts an HTTP Artifacts V4 backend whenever a workflow uses actions/upload-artifact@v4 or actions/download-artifact@v4. The control-plane RPCs of that backend, including CreateArtifact, GetSignedArtifactURL, ListArtifacts, FinalizeArtifact and DeleteArtifact, accept a caller-supplied workflow_run_backend_id and never check that it belongs to the requester: validateRunIDV4 in pkg/artifacts/artifacts_v4.go parses the value and returns it with the comparison against the requesting task's run ID left commented out. The signed URLs the backend issues are authenticated by an HMAC whose key is hardcoded to the four bytes 0xba 0xdb 0xee 0xf0, identical in every build, computed over a concatenation of endpoint, expiry, artifact name and task ID with no length prefix or delimiter, so signatures are both forgeable and ambiguous between differing artifact name and task ID pairs. The --artifact-server-addr flag defaults to the host's outbound address rather than loopback, leaving the backend reachable from the surrounding network. Any client that can reach it may read, overwrite or delete the artifacts of a concurrently running job with no credentials, exposing build outputs such as secrets and deployment credentials and permitting their replacement before the owning job consumes them. |
| CVE-2026-76848 | TypeORM's SelectQueryBuilder.distinctOn accepts an array of strings and stores it on the expression map without validation. For PostgreSQL-family drivers, createSelectDistinctExpression in src/query-builder/SelectQueryBuilder.ts joins that array and interpolates the result into the generated statement as SELECT DISTINCT ON (values), with no escaping, quoting, identifier validation or allowlist, and without routing the values through replacePropertyNames or the driver's escape helper. Because the interpolation point is a parenthesized SQL expression list rather than an identifier-only position, a supplied element may carry arbitrary expressions, including correlated subqueries. An application that forwards a client-controlled value into distinctOn, for instance to let a caller choose a deduplication column, allows that client to read data anywhere the application's database role can reach through boolean or time-based inference, independently of the entity being queried. validateOrderByCondition, the allowlist check guarding the orderBy family in the same class, is not applied to this path. |
| CVE-2026-77310 | jackson-databind contains the general-purpose data-binding functionality and tree-model for Jackson Data Processor. Prior to versions 2.18.9, 2.21.5, 2.22.1, 3.1.5, and 3.2.1 on their respective release lines, the java.net.InetAddress branch of FromStringDeserializer.Std._deserialize() calls InetAddress.getByName() on attacker-controlled input, causing eager DNS resolution during deserialization and enabling DNS-based server-side request forgery and internal-host enumeration. This issue is fixed in versions 2.18.9, 2.21.5, 2.22.1, 3.1.5, and 3.2.1. |
| CVE-2026-77567 | Filament is a collection of full-stack components for accelerated Laravel development. Prior to versions 4.12.0 and 5.7.0, incorrect challenge-form required-field handling allows app-based multi-factor authentication to be bypassed when recovery codes are enabled. Email-based multi-factor authentication is not affected. This issue is fixed in versions 4.12.0 and 5.7.0. |
| CVE-2026-78211 | 4MOSAn GCB Doctor developed by 4MOSAn Security Technology has a OS Command Injection vulnerability. Unauthenticated remote attackers can inject malicious commands through an unremoved ADOdb test page parameter, thereby executing arbitrary system commands on the server. |
| CVE-2026-78212 | 4MOSAn developed by 4MOSAn Security Technology Co., Ltd. has an Arbitrary File Read vulnerability. Unauthenticated remote attackers can exploit a Relative Path Traversal flaw to download arbitrary system files. |
| CVE-2026-78213 | Heptabase developed by Hepta Platforms, Inc. has a Stored Cross-Site Scripting vulnerability. Authenticated remote attackers can inject persistent malicious content into specific pages, causing arbitrary JavaScript code to execute when other users click the crafted content. |
| CVE-2026-78250 | A vulnerability was identified in bytebot-ai bytebot 0.0.1. The affected element is an unknown function of the component Agent Execution Workflow. Such manipulation leads to infinite loop. The attack may be performed from remote. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2026-78251 | DJI drones contain an FTP service that uses hardcoded credentials shared across affected models and permits authenticated users to upload files without limits on file size, file count, or total storage consumed in **/blackbox/upgrade/**, as well as overwrite existing files in that directory. An attacker with access to the drone's internal network or USB RNDIS interface can exhaust the available storage, preventing the aircraft from writing flight records, logs, and telemetry and potentially preventing subsequent firmware updates. Uploaded files persist across reboot and factory reset.
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. |
| CVE-2026-78255 | The HTTP media server running on DJI drones serves stored photos and videos through the `/v2` endpoint without authenticating the requesting client. Filenames follow a predictable pattern, allowing an attacker who joins the drone's internal network to enumerate valid filenames and exfiltrate stored photos and videos. The exposed media may reveal sensitive information, including private locations, property, travel history, identifiable individuals, and the operator's routines.
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600. |
| CVE-2026-78258 | Unauthenticated Broken Access Control in Booking and Rental Manager <= 2.7.5 versions. |
| CVE-2026-78259 | Unauthenticated Broken Authentication in WPLegalPages <= 3.7.0 versions. |
| CVE-2026-78262 | Unauthenticated PHP Object Injection in WP Project Manager <= 4.0.6 versions. |
| CVE-2026-78263 | Unauthenticated Cross Site Scripting (XSS) in Event Tickets <= 5.29.2.1 versions. |
| CVE-2026-78264 | Unauthenticated Cross Site Scripting (XSS) in Toolset Blocks <= 1.6.26 versions. |
| CVE-2026-78265 | Unauthenticated PHP Object Injection in The Events Calendar <= 6.17.2 versions. |
| CVE-2026-78266 | Subscriber Broken Access Control in AutomatorWP <= 5.8.3 versions. |
| CVE-2026-78267 | Unauthenticated Privilege Escalation in TranslatePress <= 3.3.2 versions. |
| CVE-2026-78268 | Unauthenticated Sensitive Data Exposure in Lead Generation Contact Widget & AI Chatbot: Chat Button, Phone Call, Telegram, Email – SiteLeads <= 1.2.0 versions. |
| CVE-2026-78269 | Contributor Server Side Request Forgery (SSRF) in Shared Files <= 1.7.69 versions. |
| CVE-2026-78270 | Author SQL Injection in FluentCRM Pro <= 3.1.12 versions. |
| CVE-2026-78272 | Subscriber Broken Access Control in Fluent Support Pro <= 2.3.1 versions. |
| CVE-2026-78277 | Subscriber Server Side Request Forgery (SSRF) in FluentCRM Pro <= 3.1.12 versions. |
| CVE-2026-78278 | Subscriber Insecure Direct Object References (IDOR) in Fluent Boards Pro <= 2.0.11 versions. |
| CVE-2026-78279 | Unauthenticated Cross Site Request Forgery (CSRF) in Fluent Support Pro <= 2.3.1 versions. |
| CVE-2026-78434 | A flaw has been found in Faveo Helpdesk up to 2.0.3. This impacts the function FormController::post_ticket_reply of the file app/Http/Controllers/Client/helpdesk/FormController.php of the component post-ticket-reply Endpoint. This manipulation causes missing authentication. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-78435 | A vulnerability has been found in Faveo Helpdesk up to 2.0.3. Affected is the function unlink of the file app/Http/Controllers/Admin/helpdesk/SettingsController.php of the component Logo Handler. Such manipulation of the argument data1 leads to path traversal. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-78553 | RansomLook created its Flask session-signing key without explicitly restricting the file permissions. The secret_key file was created using the process's default permissions and umask, resulting in permissions such as 0644 under a common 022 umask. Consequently, other local users able to access the RansomLook home directory could read the application's cryptographic secret.
The exposed key is security-critical because it is used to sign Flask session cookies and is also involved in the legacy API-key key derivation. An attacker who obtains the key can generate valid session cookies and impersonate an authenticated user, including an administrator. In LDAP configurations, exploitation may be particularly straightforward because the session user loader does not require the supplied username to correspond to an existing local user.
Successful exploitation requires local access sufficient to read the improperly protected file, but can result in complete compromise of RansomLook's authentication and authorization controls.
The patch creates new secret-key files atomically with permissions 0600 and also restricts permissions on existing key files during application startup. |
| CVE-2026-78555 | RansomLook exposed complete API keys in the HTML source of the authenticated /admin/apikeys administration page. Although the interface displayed only a shortened representation of each key, the full token was embedded in hidden form fields used by the enable/disable, private-access, and delete actions.
As a result, API credentials could be recovered by inspecting the page source or DOM. The credentials could also be unintentionally exposed through components that retain or inspect HTTP response bodies, such as debugging proxies, browser caches, monitoring systems, or other intermediaries. An attacker obtaining one of these tokens could subsequently authenticate using the privileges assigned to that key, including access to private data where the key was granted such permissions.
The patch removes API keys from subsequent page rendering and replaces them with SHA-256-derived opaque handles. Administrative actions submit only these handles, which are resolved back to the corresponding token on the server. The full API key is therefore disclosed only once, when it is initially created. |
| CVE-2026-8173 | The web GUI of affected Murrelektronik Xelity switches logs MAC addresses from the devices MAC address table when an authenticated administrator uses the 'Copy learned MAC Addresses' function. Due to improper generation of error messages, an unauthenticated attacker with network access to the web interface can retrieve the logged MAC addresses via browser developer tools. |
| CVE-2026-9254 | An unauthenticated OS command injection vulnerability exists in the parental control functionality of Archer BE800 V1, BE3600 V1, and AX75 V1 due to improper filtering and neutralization of special characters in certain parameters. A LAN-based attacker can inject arbitrary commands and execute them with root privileges.
Successful exploitation may result in complete device compromise and impact the confidentiality, integrity, and availability of the affected device and network traffic. |
| CVE-2026-9728 | The userspace syscall verifier z_vrfy_mbox_send() in drivers/mbox/mbox_handlers.c validated the nested msg->data/msg->size fields by reading them directly out of live userspace memory, and then forwarded the original, still-mutable userspace struct mbox_msg * pointer to z_impl_mbox_send() and the underlying driver. Between the access check and the driver's use of msg->data, the validated pointer could be replaced, leaving a time-of-check/time-of-use window.
On a system built with CONFIG_USERSPACE, any unprivileged userspace thread may invoke the mbox_send() system call. A second thread sharing the caller's address space can race to overwrite msg->data with a supervisor (kernel) address after the verifier's bounds check has passed but before the driver dereferences it. The driver then reads from the attacker-chosen address in supervisor context (for example memcpy(&data32, msg->data, msg->size) in the NXP mailbox driver, whose bytes are subsequently emitted to the peer mailbox endpoint).
The impact is a userspace-to-supervisor access-control bypass: disclosure of kernel memory contents (high confidentiality impact), or, for an invalid/unmapped target address, a faulting kernel read causing denial of service. The fix snapshots the entire struct mbox_msg into a kernel-stack copy with k_usermode_from_copy() and validates and forwards that immutable copy, closing the race. |