| CVE-2025-58375 | Frappe is a full-stack web application framework. Versions 14.96.9 and below, and 15.0.0 through 15.71.0 have an insecure endpoint parameter that is vulnerable to error-based SQL Injection through lack of validation. Sensitive information such as versioning can be retrieved. This issue is fixed in versions 14.96.10 and 15.72.0. |
| CVE-2025-63235 | In sol commit 373d848 (2024-12-12), the broker does not fully release resources when handling malformed or duplicate CONNECT packets. When clients send invalid CONNECT packets - either due to repeated attempts or failed authentication - the server may silently drop the connection or send a CONNACK but fail to close the session or deallocate internal resources. This behavior allows an attacker to create numerous half-open connections that consume memory and file descriptors indefinitely, potentially triggering the Linux OOM killer and causing a denial of service. |
| CVE-2025-71409 | Lack of authentication for Very High Frequency Data Link messages allows rogue ground stations to inject CPDLC messages leading to unexpected or misleading clearances and potential pilot confusion. This type of attack can be carried out remotely over radio frequency. |
| CVE-2025-71410 | Unnumbered Disconnect (U DISC) and malformed Aviation Very High Frequency Link Control frames can terminate sessions and lead to a loss of CPDLC functions requiring a reversion to voice communication and increased controller workload. This type of attack can be carried out remotely over radio frequency. |
| CVE-2025-71411 | Broadcast control frames can disconnect multiple aircraft simultaneously leading to delayed clearances and air traffic controller overload. This type of attack can be carried out remotely over radio frequency. |
| CVE-2025-71412 | Injection of false emergency or status messages over CPDLC may lead to misallocation of resources, operational confusion, and improper response actions by flight crews, traffic controllers, and ground operations. This type of attack can be carried out remotely over radio frequency. |
| CVE-2025-71413 | Malformed or out-of-sequence frames at the Aviation Very High Frequency Link Control X.25 layers cause repeated resets which may result in increased workload and reduced situational awareness. This type of attack can be carried out remotely over radio frequency. |
| CVE-2026-11425 | Domoticz versions prior to 2026.3 contains a stored cross-site scripting vulnerability in the mobile dashboard that allows authenticated attackers to inject arbitrary HTML and JavaScript by updating Text or Alert subtype device values through the API. The mobile dashboard renders device data via ng-bind-html with only an nl2br() transform that performs no HTML escaping, allowing attackers to store malicious payloads that execute in any administrator's browser upon viewing the mobile dashboard, enabling session cookie theft and account takeover. |
| CVE-2026-11430 | Grav CMS's scheduler-webhook plugin contains an authentication bypass in the webhook token check. When the webhook feature is enabled but no webhookToken is configured, a compound conditional short-circuits and skips token validation, so an unauthenticated remote attacker who can reach POST /scheduler/webhook can trigger the operator's already-configured scheduled jobs by sending a single request. The primitive is triggering-existing-jobs, not attacker-chosen command execution: the attacker controls when the jobs run and which one runs (via ?job=), but does not control what the jobs do. Code execution follows only when the operator has configured a job that shells out, and even then the attacker controls timing rather than payload. Not a default-install issue: reaching the endpoint requires the separate scheduler-webhook GPM plugin to be installed, scheduler.modern.webhook.enabled to be true (default false), and no webhookToken to be configured; a stock Grav or Grav-Admin install exposes nothing here. |
| CVE-2026-15570 | An improper restriction of URL schemes and destinations in the SmartCenter browserseturl command in the Telefunken TE24553B45V2DZ Smart TV running on the Vestel MB181 / Voltron181 / TiVo OS platform allows an attacker with access to the same local network to cause the embedded browser to issue requests to unintended loopback/internal destinations, including 127.0.0.1 addresses. In demonstrated scenarios, requests initiated through the SmartCenter browserseturl mechanism could reach an internal service and receive a successful response, although the same destination was not reachable through normal browser navigation. The issue affects firmware version V2.78.0.0 and is fixed in firmware version V2.85.2.0. |
| CVE-2026-15816 | A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| CVE-2026-16027 | Server-Side request forgery (SSRF) vulnerability in Revenue Administration Türkiye's E-Signature allows Server Side Request Forgery.
This issue affects Türkiye's E-Signature: from 2.4.4.0 before 2.5.1.0. |
| CVE-2026-16637 | OPeNDAP Hyrax allows SSRF and credential disclosure via unvalidated HTTP redirects that bypass the AllowedHosts allowlist and leak Earthdata headers (User-Id, Echo-Token) to attacker-controlled endpoints. |
| CVE-2026-17593 | An account holding the nexus:settings:update permission in Nexus Repository 3 (or the equivalent nexus:settings permission in the legacy Nexus Repository 2) could submit arbitrary values as realm identifiers through an internal configuration API that did not validate them against the set of registered realms. Because unrecognized entries were persisted and re-evaluated on every realm load via a legacy code path, this could result in unintended code executing inside the Nexus Repository process, and in some cases a persistent authentication lockout that was not visible through the administrative UI. |
| CVE-2026-17594 | Nexus Repository 3 CE/Pro versions 3.0.0 through 3.94.x contain an incorrect authorization vulnerability (CWE-863) in the repository-creation user interface. An individual user account holding a delegated repository-admin privilege scoped to a specific repository format could create a repository of a different, unauthorized format, because authorization was checked against one request field while a separate, attacker-controlled field determined the repository format actually created. This does not affect the anonymous user, which cannot hold this privilege by default. Fixed in version 3.95.0. |
| CVE-2026-17595 | Nexus Repository 3 did not fully sandbox JEXL expressions used in Content Selectors. An account holding the nexus:selectors:create permission could construct an expression that read Java object properties not intended to be exposed to the expression engine, disclosing internal JVM class metadata such as class and classloader names. This issue does not permit method invocation, object construction, or arbitrary code execution. This has been fixed by restricting property access in the JEXL sandbox to the intended data types. |
| CVE-2026-17596 | Nexus Repository 3 was found to be vulnerable to stored cross-site scripting (XSS). A user with the nexus:blobstores:create or nexus:blobstores:update permission could set a blob store name containing malicious script content, which would later execute in the browser of another user viewing system health-check status. This issue has been fixed in version 3.95.0. |
| CVE-2026-17597 | Nexus Repository 3 contains a Server-Side Request Forgery (SSRF) vulnerability in the email configuration verification feature. A user holding the nexus:settings:update permission could submit arbitrary host and port values to the email test/verification endpoint, causing the server to attempt outbound network connections to internal or otherwise restricted network addresses. Differences in the server's response could be used to infer whether internal hosts and ports are reachable. This issue affects Nexus Repository 3 CE/Pro versions up to and including 3.94.1, and is fixed in version 3.95.0. |
| CVE-2026-17598 | Sonatype Nexus Repository 3 did not properly filter internal configuration keys from user-supplied task properties when creating or updating a scheduled task through the administrative UI. An account holding permission to create at least one scheduled task type could supply a crafted property value that caused the system to overwrite the configuration of an unrelated, existing task instead of creating a new one. |
| CVE-2026-17599 | Nexus Repository 3 contained an endpoint used to change the administrator account password during initial onboarding. This endpoint did not verify that onboarding was still in progress before allowing the password change, relying instead on the presence of a local onboarding artifact. As a result, an account holding the nexus:* permission could invoke the endpoint outside the intended onboarding flow to replace the administrator password, and existing sessions were not invalidated after the change. |
| CVE-2026-18938 | A flaw was found in p11-kit. A local attacker, or one with equivalent access to a reachable RPC channel, could exploit an integer overflow vulnerability. By sending specially crafted messages, the attacker can cause the system to miscalculate memory allocation for nested attributes. This leads to a memory corruption issue, specifically a heap out-of-bounds write, which can crash the p11-kit RPC parsing process, resulting in a Denial of Service (DoS). This vulnerability is only exploitable on 32 bit systems. |
| CVE-2026-19012 | Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19014 | Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19015 | Consul Community Edition and Consul Enterprise 1.2.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect CA roots endpoint that may allow a remote caller to grow the agent's Connect CA roots cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-19015, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19016 | Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19017 | Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19079 | A TOCTOU (Time-of-Check-Time-of-Use) race condition vulnerability was found in the fixfiles script in policycoreutils. When running fixfiles relabel or fixfiles restore, the script used find and chcon commands to locate and relabel unlabeled files under /tmp and other directories. A local attacker could exploit a race window between the file discovery and the label change operation by swapping directory components with symlinks, causing chcon to follow the symlink and modify SELinux labels on arbitrary system files. This could undermine SELinux mandatory access control protections on critical files such as /etc/shadow. |
| CVE-2026-19082 | Imager versions from 0.45_02 before 1.034 for Perl may expose adjacent heap bytes via strlen() over-read from zero-count ASCII EXIF entries in copy_string_tags.
copy_string_tags() computes an ASCII EXIF tag's length as `entry->size - 1` to strip the trailing NUL. A zero-count ASCII entry sets `entry->size` to 0, and the derived length reaches i_tags_add() as -1, which is interpreted as a request to call strlen(), scanning past the entry to the next NUL and copying those bytes into the tag. JPEG reaches this path via im_decode_exif(), as does the separate Imager::File::WEBP distribution, which is fixed by upgrading Imager.
Any caller of Imager->read() on an attacker-supplied image with such an entry may receive an exif_* tag holding adjacent heap bytes instead of an empty string. |
| CVE-2026-19113 | Consul Community Edition and Consul Enterprise 1.3.0 through 2.0.2 are vulnerable to an unauthenticated denial of service in several agent HTTP API endpoints. A remote caller could cause the agent to consume substantial memory before the request was rejected. This vulnerability, CVE-2026-19113, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| CVE-2026-19190 | A weakness has been identified in StableBit Scanner 2.6.13.4088. This affects an unknown part of the file C:\Program Files (x86)\StableBit\Scanner\Service\Scanner.Service.exe of the component ScannerService. This manipulation causes permission issues. The attack is restricted to local execution. The exploit has been made available to the public and could be used for attacks. |
| CVE-2026-19191 | A security vulnerability has been detected in StableBit DrivePool 2.3.13.1687. This vulnerability affects unknown code of the file C:\Program Files\StableBit\DrivePool\DrivePool.Service.exe of the component DrivePoolService. Such manipulation leads to permission issues. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. |
| CVE-2026-19192 | A vulnerability was detected in DeepCool DisplayService 1.2.12. This issue affects some unknown processing of the file C:\DeepCool\resources\service\x64\DeepCoolDisplayService.exe. Performing a manipulation results in improper access controls. The attack must be initiated from a local position. The exploit is now public and may be used. |
| CVE-2026-19193 | A flaw has been found in Jiangmin Antivirus 21. Impacted is the function MessageNotifyCallback in the library kvcore.sys of the component Minifilter Port. Executing a manipulation can lead to improper access controls. The attack needs to be launched locally. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19195 | A vulnerability has been found in V-Secure Jingyun Antivirus 2.4.2.39. The affected element is an unknown function in the library ZyArk.sys of the component Kernel Driver. The manipulation leads to improper access controls. The attack needs to be performed locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19206 | A security flaw has been discovered in MZ Automation libiec61850 up to 1.6.1. This affects the function SVReceiver_stopThreadless of the file src/sampled_values/sv_subscriber.c of the component ASDU Element Handler. Performing a manipulation results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.6.2 is able to mitigate this issue. The patch is named a96bd674e0238276dd1387d31d52e55229d0771e. The affected component should be upgraded. |
| CVE-2026-19208 | A vulnerability was detected in WonderTrader up to 0.9.9. Impacted is the function TraderDD::queryTrades of the file src/TraderDD/TraderDD.cpp. The manipulation of the argument FID_JYLB results in enforcement of behavioral workflow. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is considered difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19212 | A vulnerability was determined in WonderTrader up to 0.9.9. This impacts an unknown function of the file src/Includes/WTSTradeDef.hpp of the component TraderATP Cash Trade Conversion. Executing a manipulation of the argument m_offsetType can lead to use of uninitialized variable. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19213 | A vulnerability was identified in WonderTrader up to 0.9.9. Affected is the function _undone_qty in the library src/WtCore/TraderAdapter.h of the component Pending Order Handler. The manipulation of the argument getUndoneQty leads to enforcement of behavioral workflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19243 | A security vulnerability has been detected in HKUDS nanobot up to 0.2.1. Impacted is the function ExecTool._guard_command/ExecTool._spawn of the file nanobot/agent/tools/shell.py of the component Shell Allowlist Handler. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.3.0 is recommended to address this issue. The name of the patch is 4562. It is advisable to upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "These five reports are variants of the same root cause: validation of shell commands containing multiple segments, wrappers, comments, or chained commands. The issue was fixed by validating every executable shell segment against the configured allowlist". |
| CVE-2026-19244 | A vulnerability was detected in HKUDS nanobot up to 0.2.1. The affected element is the function connect_mcp_servers of the file nanobot/agent/tools/mcp.py of the component MCP enabledTools Scope Handler. Performing a manipulation results in improper access controls. The attack is possible to be carried out remotely. The exploit is now public and may be used. Upgrading to version 0.3.0 is sufficient to fix this issue. The patch is named 4436. You should upgrade the affected component. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "Both reports describe the same root cause: MCP resource and prompt wrappers could be registered outside the intended enabledTools scope. The registration boundary was corrected". |
| CVE-2026-19245 | A flaw has been found in HKUDS nanobot up to 0.2.1. The impacted element is the function ExecTool._prepare_command of the file nanobot/agent/tools/shell.py of the component Login-shell Environment Handler. Executing a manipulation can lead to information disclosure. The attack requires local access. The exploit has been published and may be used. Upgrading to version 0.3.0 is sufficient to resolve this issue. This patch is called 4525. The affected component should be upgraded. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "The report concerns shell startup files reintroducing environment variables when command execution defaults to a login shell. The default was changed so exec does not use a login shell unless explicitly requested". |
| CVE-2026-19246 | A vulnerability has been found in HKUDS nanobot up to 0.2.1. This affects the function _download_image_data_url of the file nanobot/providers/image_generation.py of the component Provider-returned Image URL Handler. The manipulation leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5095. It is recommended to apply a patch to fix this issue. The vendor explains: "We confirm that provider-returned image URLs required the same SSRF protections applied to other network retrieval paths. (...) The patch is currently available on main and is planned for the next patch release, v0.3.1." |
| CVE-2026-19264 | Postiz is an open-source social media scheduling tool. The route that serves locally stored media joins URL-supplied path segments onto the upload directory and streams the file without normalising the path or confining it to that directory, and the route requires no authentication. Raw dot-segments are collapsed before routing, but URL-encoded separators survive route matching and are decoded only once they reach the handler, restoring the traversal at the filesystem call. An unauthenticated remote attacker can therefore read any file readable by the application process, including the process environment, which exposes the JWT signing secret, the database connection string, and connected provider and billing secrets. Because session tokens are signed with that secret and carry no expiry, this allows forging a non-expiring session as any user, including an administrator, without a password. |
| CVE-2026-37171 | A lack of tenant separation in SuperTokens Inc. SuperTokens Core v6.0.0 to v11.4.0 allows an authenticated party in one tenant to access sessions, data, and endpoints of another tenant. |
| CVE-2026-45204 | Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger OOB access and kernel null pointer dereference in an error path.
Null pointer dereference occurs in an error path of a function running in kernel thread of execution leading to kernel exceptions, platform instability and denial of service. |
| CVE-2026-45808 | OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, OpenBao's namespaces provide multi-tenant separation. A tenant who intentionally leaks lease identifiers can have their lease and underlying credential revoked or renewed by a user in another tenant via the legacy, undocumented `sys/revoke` and `sys/renew` endpoints. This is fixed in OpenBao v2.5.4. |
| CVE-2026-46358 | OpenBao is an open source identity-based secrets management system. Prior to version 2.5.4, OpenBao's inline auth functionality incorrectly redacted audit log entries, resulting in non-auth headers being removed and auth-related headers being retained in cleartext. This requires an attacker to compromise access to the audit device. Operators should review leaked source authentication material and rotate it as appropriate. This is fixed in OpenBao v2.5.4. |
| CVE-2026-47660 | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's bulk-submit operation allows an allowed submitter to supply an explicit `oauthMetadataUrl` parameter that is not validated against `pathling.bulkSubmit.allowableSources`. When present, the bulk-submit OAuth flow trusts metadata and the returned `token_endpoint` from the caller-chosen location, then builds outbound OAuth client authentication directly from the submitter's stored credentials. This is fixed in Pathling Server 2.0.0. |
| CVE-2026-47661 | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's `/$result` endpoint allows a caller who can obtain any valid async export job ID to supply `file` parameter values containing path traversal sequences. The handler verifies only the supplied `job` and never normalises or confines the requested `file` path to that job's `jobs/<jobId>` directory before opening it as a filesystem resource. Because async export scratch space lives under the same warehouse database root as persisted resource tables, an attacker can use their own export job to read other files from the warehouse. This is fixed in Pathling Server 2.0.0. As an interim mitigation, disable the async export operations (`pathling.operations.exportEnabled`, `patientExportEnabled`, `groupExportEnabled`, `bulkSubmitEnabled`) or enable authentication and restrict export capability to trusted callers. |
| CVE-2026-47662 | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's typed CRUD/search/batch FHIR surface allows an authenticated caller with only coarse operation authorities to act on attacker-chosen resource families because those entrypoints do not consistently enforce the documented per-resource `read` and `write` authorities. The documented authorization model requires an operation authority (e.g. `pathling:search`) to be paired with the matching per-resource `read` or `write` authority (e.g. `pathling:read:Patient`). Delete and batch are documented to require write authority for all referenced resource types. However, typed search, update, and related handlers are annotated only with `@OperationAccess(...)` and act on the provider-selected resource type without checking the corresponding per-resource authority. This is fixed in Pathling Server 2.0.0. |
| CVE-2026-47663 | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, Pathling's typed CRUD/search/batch FHIR surface allows an authenticated caller with only coarse operation authorities to act on attacker-chosen resource families because those entrypoints do not consistently enforce the documented per-resource `read` and `write` authorities. The documented authorization model requires an operation authority (e.g. `pathling:search`) to be paired with the matching per-resource `read` or `write` authority (e.g. `pathling:read:Patient`). Delete and batch are documented to require write authority for all referenced resource types. However, typed search, update, and related handlers are annotated only with `@OperationAccess(...)` and act on the provider-selected resource type without checking the corresponding per-resource authority. This is fixed in Pathling Server 2.0.0. |
| CVE-2026-47664 | Pathling is a set of tools that make it easier to use FHIR and clinical terminology within health data analytics. Prior to version 2.0.0 of Pathling Server, the `$import-pnp` operation in Pathling Server accepts a caller-supplied `exportUrl` and uses it as the remote FHIR Bulk Export endpoint without constraining it to a trusted source. When PNP credentials are configured, Pathling builds a credentialed bulk-export client targeting the caller-chosen host, downloads manifest-selected files, and then reclassifies those staged files as trusted local `file://` imports - bypassing the configured `allowableSources` allowlist that protects the ordinary `$import` operation. This is fixed in Pathling Server 2.0.0. As a workaround, disable the `$import-pnp` operation (`pathling.operations.importPnpEnabled=false`) or do not configure PNP credentials. |
| CVE-2026-48039 | Meta Ads MCP is a Model Context Protocol (MCP) server that lets AI assistants run Meta Ads. Prior to version 1.0.109, `AuthInjectionMiddleware.dispatch()` at `http_auth_integration.py:272` unconditionally forwards unauthenticated Streamable HTTP requests to downstream MCP tool handlers without issuing a `401` response, allowing any network-reachable caller to invoke MCP tools without authentication. When no per-request credential is present, tool handlers fall back to the `META_ACCESS_TOKEN` environment variable, and when the downstream Meta Graph API call fails, `api.py:263–269` serialises the raw `httpx` request URL—including the operator's `access_token` as a query parameter—into the JSON-RPC response body, delivering the credential to the unauthenticated caller. Version 1.0.109 fixes the issue. |
| CVE-2026-48120 | Kakoune is a code editor. Prior to version 2026.05.21, the bundled, enabled by default, `autorestore.kak` script can be exploited by malicious backup files leading to arbitrary kakoune and shell commands being executed by simply opening a file. Kakoune 2026.05.21 fixes the issue. As a workaround, add `autorestore-disable` to the user kakrc will disable the autorestore feature. |
| CVE-2026-48122 | Ruby LSP is an implementation of the language server protocol for Ruby. Several workspace-level settings in the Ruby LSP VS Code extension prior to version 0.10.4 could override the path to the Ruby executable, the version manager executables, or the Bundler `Gemfile` used at startup. A malicious repository containing a `.vscode/settings.json` could set these values to attacker-controlled targets. Opening and trusting the repository would then execute code with the privileges of the developer. The Ruby LSP gem and clients of the language server in other editors are not affected. Version 0.10.4 of the Ruby LSP VS Code extension fixes the issue. |
| CVE-2026-48170 | `scim-patch`, a library to perform SCIM patch, prior to version 0.9.1 performs prototype pollution when applying a SCIM PATCH operation whose `value` object contains a key like `"__proto__.someProp"`. After one such patch,
`Object.prototype.someProp` is set process-wide, affecting every plain object in the Node process. Any service that calls `scimPatch()` on attacker-controlled JSON (i.e. any SCIM endpoint accepting `PATCH` from an external IdP) is exploitable on a stock Node runtime. Version 0.9.1 contains a patch. A workaround is available. Calling `Object.freeze(Object.prototype)` (and the same on `Array.prototype`, `Function.prototype`) at process startup neutralizes this class of bug — assignment to a frozen prototype becomes a silent no-op in sloppy mode or a `TypeError` in strict mode. Node's `--frozen-intrinsics` flag does this for built-ins automatically. |
| CVE-2026-49005 | The root password hash of the device can be obtained through unencrypted information in the firmware. |
| CVE-2026-49006 | By accessing unencrypted information in the device firmware, an attacker can obtain credentials related to TLS transmission. |
| CVE-2026-49007 | By accessing unencrypted information in the device firmware, an attacker can obtain the initial login credentials for the device's web interface. |
| CVE-2026-49008 | By accessing unencrypted information in the device firmware, an attacker can obtain credentials related to the integrity verification of a specific application function on the device. |
| CVE-2026-49163 | Improper limitation of a pathname to a restricted directory ('path traversal') in Application Insights Profiler allows an authorized attacker to elevate privileges over a network. |
| CVE-2026-49343 | Klever-Go is the Go implementation of the Klever blockchain protocol. In versions prior to 1.7.18, the account-data trie syncers are vulnerable to a resource-exhaustion flaw that leaks bounded throttler slots on error paths. In syncDataTrie() (in both userAccountsSyncer.go and kappAccountsSyncer.go), StartProcessing() reserves a slot from the NumGoRoutinesThrottler, but the corresponding EndProcessing() is only called on the success path and on the duplicate-root early return. As a result, any error from trie.NewTrie(), trie.NewTrieSyncer(), or trieSyncer.StartSyncing() (including the network-dependent timeout path) permanently consumes one slot for the lifetime of the throttler. An attacker who can repeatedly cause trie-node sync failures or timeouts during bootstrap can exhaust the bounded throttler, after which further account-data trie syncs stop making progress and SyncAccounts() returns a timeout. Because epoch bootstrap in syncUserAccountsState() and syncKappAccountsState() aborts on any such error, this causes bootstrap to fail, a core availability issue affecting fresh, restarting, or resyncing nodes and validators. This issue is fixed in version 1.7.18. |
| CVE-2026-49746 | Software installed and run as a non-privileged user may conduct improper GPU system calls to cause OOB read kernel memory access and in certain cases cause GPU UAF of arbitrary pages.
Incorrect validation of array index can lead to OOB read and potentially to GPU UAF of arbitrary pages. |
| CVE-2026-52878 | Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. |
| CVE-2026-52879 | Klever-Go is the Go implementation of the Klever blockchain protocol. In versions 1.7.14 through 1.7.17, the direct-message ingress handler spawns a new goroutine for every incoming direct message before the processor-level antiflood layer makes any admission decision, with no semaphore, throttler, or bound on the number of concurrent in-flight spawns. Because the antiflood check runs inside the spawned goroutine rather than before it, a single connected peer can open a direct-send stream and send a stream of well-formed messages to force unbounded goroutine creation, where each goroutine allocates its own stack and holds a message reference until processing completes, adding scheduler and garbage-collection pressure faster than the runtime can drain it. This lets one peer degrade the node's availability and its ability to process legitimate traffic, resulting in a remotely triggerable denial of service. The issue is fixed in 1.7.18. |
| CVE-2026-52880 | Klever-Go is the Go implementation of the Klever blockchain protocol. Versions from 1.7.14 through 1.7.17 are vulnerable to a remotely triggerable denial of service. Both REST APIs are started with the Gin Engine.Run convenience method, which serves requests through Go's default HTTP server with no ReadHeaderTimeout, ReadTimeout, or MaxHeaderBytes configured. As a result, incoming connections that never complete their request headers are held open indefinitely. When a REST listener is reachable beyond localhost through the documented all-interface bind or a Docker port-publish deployment, a single unauthenticated client can open many slow-header connections and hold them open until server file descriptors are exhausted, preventing the API from accepting new connections. This renders the REST API unavailable to legitimate clients. This issue is fixed in version 1.7.18. |
| CVE-2026-54210 | Tobit Laboratories AG TeamDavid's Webbox application implements various file upload functionalities that are
vulnerable to a buffer overflow condition. By specifying an excessively
long filename in a file upload request, an unauthenticated attacker can
trigger a crash of the server, resulting in a denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54211 | Tobit Laboratories AG TeamDavid's Webbox application’s endpoint “//serverClient_close.html” is vulnerable to a
buffer overflow vulnerability in multiple form data parameters. By
submitting excessively long values in these parameters, an authenticated
attacker can trigger a server crash, resulting in denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54212 | Tobit Laboratories AG TeamDavid's Webbox application implements an API endpoint that is vulnerable to a
buffer overflow condition. By submitting a specially crafted JSON body,
such as one that is at least 8 characters long and begins with a number,
an unauthenticated attacker can cause the server to crash, resulting in
denial of service. Depending on the stack state or if a stack canary
can be disclosed through another vulnerability, this buffer overflow
could potentially lead to remote code execution and full compromise of
the server. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54213 | Tobit Laboratories AG TeamDavid's Webbox application exposes a functionality that allows the server to be
shut down when a specific endpoint (/internalRestart) is accessed. This
endpoint is accessible to unauthenticated users over the public
Internet. Instead of “restarting”, the server shuts completely down. As a
result, a remote attacker can trigger a persistent denial of service by
shutting down the web server without requiring authentication. Recovery
requires manual administrator intervention to restart the service. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54214 | Tobit Laboratories AG TeamDavid's Webbox application is vulnerable to HTTP header injection through the
“cType” URL parameter, which allows arbitrary modification of the
Content-Type header in HTTP responses. Because the parameter does not
properly restrict control characters such as URL-encoded newlines
(“%0a”) or colons, attackers can inject additional headers including
extra Location headers into the server’s response. This results e.g. in
an open redirect vulnerability. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54215 | Tobit Laboratories AG TeamDavid's Webbox contains an open redirect vulnerability via the
“replyUrl” parameter. An attacker can exploit this vulnerability to
craft a URL within the application that, when visited, redirects the
user’s browser to an arbitrary third-party site. This can be abused for
phishing attacks, where users receive a trusted domain link but are
redirected to a phishing website. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54216 | Tobit Laboratories AG TeamDavid's Webbox application contains a reflected cross-site scripting (XSS)
vulnerability. By sending a specially crafted link including an
arbitrary path, an XSS payload or the parameter “EntryInfo”, and the
parameter “!templateName=entryMail”, an attacker can cause the payload
to execute in the victim’s browser when they click the link. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54217 | Tobit Laboratories AG TeamDavid's Webbox application is vulnerable to a stored XSS vulnerability. An
attacker can send an email containing malicious JavaScript code. When a
user accesses the email, the stored cross-site scripting is triggered. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54218 | Use of hard-coded cryptographic key vulnerability in Tobit Laboratories AG TeamDavid's Webbox. For users created locally in David, passwords are stored in various
files using only obfuscation. Any user with access to the server’s file
system, or who can otherwise extract files from the server (see
vulnerability “Random File Read”), can potentially obtain affected
users’ passwords. This issue affects TeamDavid through Rollout 524. |
| CVE-2026-54338 | JupyterHub is software that allows users to create a multi-user server for Jupyter notebooks. Prior to 5.5.0, invalid input to form-based login authenticators can place an unbounded attacker-controlled username in failed-login logs, allowing an unauthenticated attacker to consume logging and storage resources. This issue is fixed in version 5.5.0. |
| CVE-2026-56793 | Dell OpenManage Server Administrator, versions prior to 11.1.0.2, contains an Improper Authentication vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Unauthorized access. |
| CVE-2026-56794 | Dell OpenManage Server Administrator, versions prior to 11.1.0.2, contains a Relative Path Traversal vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Filesystem access for attacker. |
| CVE-2026-56818 | Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| CVE-2026-58262 | Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, header signature verification counts the unused padding bits of the PubKeysBitmap toward the two-thirds validator quorum. These padding bits do not correspond to any validator and are ignored by the actual BLS aggregate-signature check, so a malicious or compromised block producer can set them to reach the required quorum while gathering fewer genuine validator signatures than the protocol demands. As a result, nodes that import or intercept the header accept it as correctly signed without a real two-thirds quorum, weakening consensus safety and undermining finality. This issue is fixed in version 1.7.20. |
| CVE-2026-59115 | '.../...//' in Microsoft Entra Provisioning Service (SyncFabric) allows an authorized attacker to elevate privileges over a network. |
| CVE-2026-59118 | Improper authorization in Microsoft Power Apps allows an unauthorized attacker to elevate privileges over a network. |
| CVE-2026-61477 | An injection vulnerability was found in libvirt's virtual network driver. The network XML parser does not strip newline characters from DNS TXT record value attributes and SRV record domain/target attributes. These values are written verbatim into the dnsmasq configuration file generated by the network driver, allowing a user with permission to define virtual networks to inject arbitrary dnsmasq configuration directives such as dhcp-script, leading to arbitrary command execution as root. |
| CVE-2026-62293 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the hidden scan command concatenates attacker-controlled Implementation Guide titles, profile titles, and source references into scan.html without escaping in Scanner.java. As a result, a user who scans an attacker-supplied IG/profile and then opens or publishes the generated local/CI HTML report can trigger stored cross-site scripting, executing attacker-controlled JavaScript in the report's browser context. This issue is fixed in version 6.9.11. |
| CVE-2026-62295 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. |
| CVE-2026-62296 | HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, XhtmlParser.java imposes no maximum element nesting depth, so a deeply nested text.div narrative triggers unbounded recursion between parseElementInner() and parseElement(), raising a StackOverflowError. An attacker who can submit FHIR resources containing such narratives can thus crash a parsing or validation worker thread, affecting validator services and any application that parses attacker-supplied FHIR JSON or XML. This issue is fixed in version 6.9.11. |
| CVE-2026-62873 | Improper verification of cryptographic signature in Microsoft 365 Admin Center allows an unauthorized attacker to elevate privileges over a network. |
| CVE-2026-62896 | Improper authentication in Microsoft Teams allows an authorized attacker to elevate privileges over a network. |
| CVE-2026-62992 | Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to 5.8.2 (and 4.5.7 on the 4.x line), Security::_checkDir() does not fully resolve symbolic links before validating that a requested path lies within a configured secure directory. An attacker able to place or reference a symlink within a directory Smarty treats as trusted (e.g., a template or config directory) could use it to point outside the intended secure directory, bypassing the containment check and reading arbitrary files accessible to the PHP process. This issue is fixed in versions 5.8.2 and 4.5.7. |
| CVE-2026-62996 | Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. From 5.0.0 until 5.8.4, Smarty's stream: resource-name handling does not adequately restrict which PHP stream wrappers and filter chains can be referenced from a template, allowing a php://filter-wrapped resource name to be used to read the contents of arbitrary local files accessible to the PHP process. An attacker able to author or influence a template's resource reference could exploit this to disclose sensitive file contents outside the intended template/config scope. This issue is fixed in version 5.8.4. |
| CVE-2026-64636 | An SQL injection vulnerability in Plesk Obsidian up to 18.0.80 for Linux and Windows allows an authenticated user to read arbitrary data from the panel database. |
| CVE-2026-64637 | Improper privilege management in the XML-RPC API of Plesk before 18.0.80, allows an authenticated reseller to obtain an administrative session for the root user account. |
| CVE-2026-64676 | Kata Containers is an open source implementation of lightweight Virtual Machines (VMs) that perform like containers. In versions prior to 4.0.0, the kata-agent is vulnerable to an authorization bypass in confidential-guest memory management. In Confidential Containers (CoCo) deployments, the kata-agent enforces an OPA/Rego-based AgentPolicy that must authorize every ttRPC API call, forming the security boundary that prevents an untrusted host from directing the confidential guest. Two ttRPC methods introduced with the mem-agent feature are missing this authorization check, so an untrusted host can invoke them unconditionally regardless of the guest's policy configuration. When mem-agent is enabled (off by default), this lets the host tamper with in-guest memory management by forcing swap, aggressive eviction, or compaction, resulting in attacker-controlled availability and performance degradation of the confidential workload entirely outside the agent-policy boundary. The impact does not include memory disclosure or code execution, and severity is bounded by the precondition that mem-agent must be explicitly enabled. This issue is fixed in version 4.0.0. |
| CVE-2026-65667 | Missing authorization in Microsoft Teams allows an unauthorized attacker to elevate privileges over a network. |
| CVE-2026-65668 | Improper access control in Microsoft Purview eDiscovery allows an authorized attacker to elevate privileges over a network. |
| CVE-2026-68772 | ZenML 0.94.6 contains a remote code execution vulnerability in the CloudpickleMaterializer component that allows attackers with write access to a shared artifact store to execute arbitrary code by planting a malicious pickle file. Attackers can replace a stored artifact.pkl file with a crafted cloudpickle payload containing a malicious __reduce__ method, which executes arbitrary system commands when any user or pipeline materializes the artifact through the unsanitized cloudpickle.load() call in cloudpickle_materializer.py. |
| CVE-2026-69207 | Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.34, the built-in CORS middleware, hono/cors, is vulnerable to a regular expression denial of service (ReDoS). During a preflight OPTIONS request, the middleware parses the attacker-controlled Access-Control-Request-Headers header using a whitespace-tolerant regular expression whose backtracking makes its running time quadratic in the input length. Because the header value is bounded only by the deployment's maximum HTTP header size, a single preflight carrying a long run of whitespace can consume seconds of CPU and block request processing. On runtimes that share one execution thread across requests, this stalls concurrent requests as well, and repeated requests can render the service unresponsive. This affects the default configuration, since the vulnerable path is reached whenever cors() is used with an unset or empty allowHeaders. Applications that set a non-empty allowHeaders are not affected. This issue is fixed in version 4.12.34. |
| CVE-2026-70561 | TestLink 1.9.20 and prior contains an insecure direct object reference vulnerability that allows any authenticated user, including low-privilege guest accounts, to read arbitrary attachments by supplying an integer attachment ID to the attachmentdownload.php handler without any project or role authorization check. Attackers can enumerate sequential integer IDs through the attachment download endpoint to retrieve file contents from private projects they have no membership in, bypassing the per-project access control model and exposing test specifications, requirements documents, execution evidence, and other sensitive uploaded files across the entire installation. |
| CVE-2026-71556 | go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, worktree operations (including checkout, status, and add) resolve symbolic links inside the working tree without confining resolution to the worktree boundary, so a maliciously crafted repository containing a symlink can cause go-git to read from or write to files outside the intended working directory when the repository is cloned and its worktree operations are used. Versions 5.19.2 and 6.0.0-alpha.5. |
| CVE-2026-71557 | go-git is an extensible git implementation library written in pure Go. Prior to 5.19.2 and 6.0.0-alpha.5, reference names are not sanitized before being used to construct on-disk paths under the reference storage directory, so a maliciously crafted reference name (for example containing directory-traversal sequences) can cause go-git to write files outside the intended reference storage directory. Versions 5.19.2 and 6.0.0-alpha.5 fix the issue. |
| CVE-2026-71558 | Heap type confusion vulnerability in Apache Fory C++ deserialization.
This issue affects Apache Fory C++ versions from 0.14.0 before 1.5.0. A crafted input payload can bypass type compatibility checks during polymorphic smart-pointer deserialization, causing an object of an incompatible type to be treated as the declared base type. This may result in undefined behavior and potentially lead to denial of service or arbitrary code execution.
Users are recommended to upgrade to Apache Fory 1.5.0, which fixes this issue. Applications not using Apache Fory C++ polymorphic smart-pointer deserialization are not affected. |
| CVE-2026-71559 | Deserialization of Untrusted Data vulnerability in the Go implementation of Apache Fory allows an attacker to cause a denial of service by supplying crafted data containing malformed type metadata, which triggers an uncaught panic.
This issue affects Apache Fory: from 0.16.0 before 1.5.0. Users of other language implementations are not affected.
Users are recommended to upgrade to version 1.5.0, which fixes the issue. |
| CVE-2026-71560 | Out-of-bounds Read vulnerability in Apache Fory C++ deserialization.
This issue affects Apache Fory C++ versions from 0.14.0 before 1.5.0 when deserializing structs containing tagged integer fields. A crafted input payload may trigger an out-of-bounds heap read in the tagged integer fast-path deserializer, potentially causing information disclosure or denial of service.
Users are recommended to upgrade to Apache Fory 1.5.0, which fixes this issue. Applications that do not use Apache Fory C++ or do not use tagged integer fields are not affected. |
| CVE-2026-71847 | Ruby JSON is a JSON implementation for Ruby. From 2.20.0 until 2.21.2, Ruby's JSON native C extension clears the consumed JSON::ResumableParser input buffer but leaves state.start, state.cursor, and state.end pointing into released storage. When partial_value reconstructs an incomplete object containing duplicate keys, the duplicate-key warning path calls cursor_position, which dereferences those stale pointers. This results in a heap-use-after-free and can terminate the Ruby process. An attacker who can supply JSON stream data to an application using JSON::ResumableParser may cause process termination when the application calls partial_value on incomplete attacker-controlled input containing duplicate object keys. This issue has been fixed in version 2.21.2. |
| CVE-2026-71848 | Hono is a Web application framework that provides support for any JavaScript runtime. From 4.12.0 to 4.12.33, the languageDetector middleware is vulnerable to algorithmic complexity denial of service when processing a crafted language tag containing a large number of hyphen separated subtags. To implement progressive language tag truncation, normalizeLanguage() repeatedly calls parts.slice(0, i).join('-') for every possible prefix, so the total amount of string processing grows quadratically with the number of subtags. Language values may come from a query parameter, cookie, Accept-Language header, or URL path, depending on the detector configuration, and the default detector order enables query string, cookie, and header detection, so applications using languageDetector() may expose this processing to unauthenticated requests. An attacker may repeatedly send requests containing long, hyphen separated language tags, causing excessive CPU consumption and preventing unrelated requests from being processed. This issue is fixed in version 4.12.34. |
| CVE-2026-9030 | A denial-of-service
vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool
instruction handlng path in httpd does not properly synchronize or safely manage
concurrent systool operations.
By sending
crafted systool instructions through the asynchronous request path, successful
exploitation may cause the httpd process or device management service to crash
and may result in temporary loss of access to the web management interface or
device reboot. |
| CVE-2026-9031 | An input validation
vulnerability exists in the HTTP-WRITEOEM handler due to insufficient validation
of user-supplied data before it is processed by internal flash-write handling
logic.
Successful
exploitation may cause httpd process or device to crash, resulting in loss of access
to the web interface and a denial-of-service condition. |
| CVE-2026-9169 | DLL Search Order Hijacking in LUCID Vision Labs Arena SDK 1.0.80.49 on Windows allows a local attacker to execute arbitrary code with the privileges of the application by placing a malicious DLL in a user-controlled directory listed in the PATH environment variable, which the SDK traverses when a required dependency is not found locally. |
| CVE-2026-13505 | In Bouncy Castle for Java FIPS (BC-FJA) before bc-fips 1.0.2.7 (1.0.X series), 2.0.2 (2.0.X series) and 2.1.3 (2.1.X series), sensitive key material held by the AES and DESede engines, the SP 800-90A DRBGs, SymmetricSecretKey and the PBKD and scrypt parameter classes was zeroised on garbage collection by overriding Object.finalize. Finalization runs at an unspecified time and in an unspecified order and is serviced by a single finalizer thread, so where objects carrying a finalizer are allocated faster than that thread retires them the pending-finalization queue grows without bound: disposal falls arbitrarily far behind, which can contribute to an OutOfMemoryError under load, and the key material those objects hold stays resident in the heap for as long as they are queued, defeating the purpose of the zeroisation. The behaviour was not a problem on Java 8 or Java 11; it is later JVMs, on which finalization has been deprecated and progressively de-emphasised, where it becomes one. Disposal of these classes now runs from a java.lang.ref.Cleaner registered in the multi-release jdk1.9 overlay, so on Java 9 and later it no longer depends on the finalizer being scheduled. Bouncy Castle for Java (bcprov) and Bouncy Castle for Java LTS are not affected, as neither implements the finalizer-based zeroisation scheme. |
| CVE-2026-19259 | A vulnerability has been found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function MmsMapping_varAccessSpecToObjectReference of the file src/iec61850/common/iec61850_common.c of the component MMS Protocol Workflow. Such manipulation of the argument GetNamedVariableListAttributesResponse.itemId leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19263 | A vulnerability was found in INQUIRELAB mcp-bridge-api up to b30a82aa1d1d1139e0de846c41c8aadee6e06114. The impacted element is an unknown function of the file mcp-bridge.js of the component Servers Endpoint. Performing a manipulation of the argument command/args results in command injection. It is possible to initiate the attack remotely. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The pull request to fix this issue awaits acceptance. |
| CVE-2026-19266 | A vulnerability was determined in Kirachon context-engine up to 1.9.0. This affects the function execGitCommand of the file src/mcp/utils/gitUtils.ts of the component review-git-diff Endpoint. Executing a manipulation of the argument args can lead to command injection. Upgrading to version 1.9.1 mitigates this issue. This patch is called e0729dcfd3a2b1682a7bff86e7174852c03419ba. It is advisable to upgrade the affected component. |
| CVE-2026-19268 | A vulnerability was identified in abdullah1854 MCPGateway up to 549f494a9e363f40530149de324b8097de424230. This impacts the function getUsageByDateRange of the file src/services/claude-usage.ts of the component Claude Usage Range Endpoint. The manipulation of the argument since leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19270 | A security flaw has been discovered in Hulupeep mcp-ui-probe up to 0.2.0. Affected is the function get_journey/delete_journey/analyze_journey/usage_stats of the file src/journey/JourneyStorage.ts of the component Journey/Usage. The manipulation of the argument journeyId/filename results in path traversal. The attack requires a local approach. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19279 | A vulnerability was identified in MIMICLab mcp-pdf-vision 1.1.0. The impacted element is the function load_pdf of the file src/index.ts. Such manipulation of the argument pdfPath/sessionId leads to command injection. The attack can only be performed from a local environment. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19281 | A security flaw has been discovered in adolfosalasgomez3011 slidev-builder-mcp 2.1.0. This affects the function generateChart of the file src/tools/generateAssets.ts of the component generateAssets Tool. Performing a manipulation of the argument outputDir results in command injection. The attack is only possible with local access. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19282 | A weakness has been identified in andreahaku llm_memory_mcp up to f11dc8bcff3ff8cf943a2945f99ff3b0bdc8a6d0. This impacts the function auto.capture of the file src/autolearn/GitHooksManager.ts of the component llm_memory_mcp. Executing a manipulation of the argument hash can lead to command injection. The attack is restricted to local execution. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19284 | A security vulnerability has been detected in MauricioMilano coder-api up to 1.1.0. Affected is the function createProject of the file src/core/projects.ts of the component Projects Endpoint. The manipulation leads to command injection. The attack must be carried out locally. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19285 | A vulnerability was detected in aaronsb memory-graph up to 5cfd2382778837b9f6399080956eee670d00452c. Affected by this vulnerability is the function JsonMemoryStorage.createDomain/JsonMemoryStorage.getMemories/JsonMemoryStorage.saveMemories of the file src/tools/memoryTools.ts. The manipulation results in path traversal. The attack must be initiated from a local position. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19287 | A flaw has been found in abrinsmead mindpilot-mcp 0.5.0. Affected by this issue is some unknown functionality of the component HistoryService. This manipulation of the argument ID causes path traversal. The attack needs to be launched locally. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19288 | A vulnerability has been found in astralisone rive-mcp-server-core up to db1d0cc4cd52589116360428b7504fd0ca748b3e. This affects an unknown part of the file packages/mcp-server/src/tools/importRiveFile.ts of the component importRiveFile Flow. Such manipulation of the argument libraryId leads to path traversal. The attack needs to be performed locally. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-71990 | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for SSH configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the SSH configuration interface to inject malicious commands and obtain root privileges on the underlying system. |
| CVE-2026-71991 | MSI Radix AXE6600 router firmware version v781521 contains a command injection vulnerability in the TelnetSSH function used for Telnet configuration that allows remote attackers to execute arbitrary commands on the affected device. Attackers can exploit this vulnerability through the Telnet configuration interface to inject malicious commands and obtain root privileges on the underlying system. |
| CVE-2026-17510 | Crypt::OpenSSL::PKCS12 versions before 1.98 for Perl allow a NULL pointer dereference in print_attribute via a zero length BMPSTRING attribute.
print_attribute() sizes the destination buffer for a BMPSTRING attribute from its declared byte length with `Renew(*attribute, length, char)`. A zero length attribute makes that a zero size reallocation, which Perl implements as a free returning NULL, so the buffer pointer becomes NULL, the following `strncpy` copies nothing, and the caller dereferences NULL in the `strlen()` it passes to `newSVpvn()`. A zero length BMPSTRING is even length, so the ASN.1 decoder accepts it and the value reaches this code. The UTF8STRING, OCTET STRING and BIT STRING arms size on `length + 1` or `length * 4 + 1` and are unaffected.
Any caller that passes an untrusted PKCS#12 file to info_as_hash() can crash the process. info() prints attribute values directly without sizing a buffer and is unaffected. |
| CVE-2026-19324 | A weakness has been identified in HelloGGX shadcn-vue-mcp up to e170e277b94235cde627803277fc8c41103a4d38. Affected by this issue is the function fs.promises.readFile of the file src/server/callback-server.ts. This manipulation of the argument filepath causes path traversal. The attack is restricted to local execution. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19325 | A security vulnerability has been detected in IncomeStreamSurfer roo-code-memory-bank-mcp-server up to 9dcb2fb5e6b65a35ac1983885a6d4e5621a0081e. This affects the function readMemoryBankFile/appendMemoryBankEntry of the file src/index.ts of the component read_memory_bank_file/append_memory_bank_entry. Such manipulation of the argument file_name leads to path traversal. The attack must be carried out locally. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19326 | A vulnerability was detected in Jevon-Zhong Ai-doctor 0.0.1. This vulnerability affects the function deleteImage of the file ai-doctor-server/src/filemanagement/filemanagement.service.ts. Performing a manipulation of the argument imagePath results in path traversal. The attack must be initiated from a local position. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19327 | A flaw has been found in abracadabra50 claude-sesh 1.0.0. This issue affects the function getEnrichedData/enrichSession of the file src/services/enricher.ts. Executing a manipulation of the argument sessionId can lead to path traversal. The attack needs to be launched locally. This patch is called 786c9d74800e6d0858b65778f31beb71b3983a50. Applying a patch is advised to resolve this issue. |
| CVE-2026-19328 | A vulnerability has been found in aktsmm skill-ninja-mcp-server 0.1.0. Impacted is the function getInstalledSkills/installSkill/updateAgentsMd/uninstallSkill of the file src/installer.ts. The manipulation of the argument workspacePath leads to path traversal. The attack needs to be performed locally. Upgrading to version 0.1.1 is recommended to address this issue. The identifier of the patch is 855b46739e0f6e8388f17f9d0066ac4298a3965d. Upgrading the affected component is recommended. |
| CVE-2026-19329 | A vulnerability was found in andreahaku codex_mcp up to 1ff521cc6cc57cfe56ddef946c644b8534771390. The affected element is an unknown function of the file src/codex-process-simple.ts of the component ask MCP Tool. The manipulation of the argument model results in command injection. The attack requires a local approach. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19340 | A weakness has been identified in anubissbe ProjectHub-Mcp up to 5.0.0. This affects an unknown function of the file backend-fix/complete_backend.js of the component Webhooks API. This manipulation of the argument url causes server-side request forgery. Remote exploitation of the attack is possible. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19341 | A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/pptpSrvGlobalConfig. Such manipulation of the argument EncryptionMode leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19351 | A vulnerability was found in dresende node-sql-query 0.1.25/0.1.26/0.1.27/0.1.28. Affected by this vulnerability is the function SelectQuery.from/SelectQuery.build in the library lib/Select.js of the component Request Parameter Handler. Performing a manipulation results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Upgrading to version 0.1.29 addresses this issue. The patch is named 3414c42f6de89826fa1f5f36f6139d1e6552778e. Upgrading the affected component is recommended. |
| CVE-2026-19352 | A vulnerability was determined in mifi lossless-cut up to 3.69.0. Affected by this issue is some unknown functionality of the file src/main/httpServer.ts of the component Built-in HTTP API Service. Executing a manipulation can lead to server-side request forgery. The attack requires access to the local network. This attack is characterized by high complexity. The exploitation is known to be difficult. The exploit has been publicly disclosed and may be utilized. This patch is called 260802348955231442c4bae6c2d9d8ede947af0a. It is best practice to apply a patch to resolve this issue. The project maintainer provides this view: "I'm not sure that this is a critical vulnerability, because it is behind an experimental CLI flag and the NTLM behavior isn't really a LosslessCut bug." The CVSS vector reflects the high level of pre-requisites. |
| CVE-2026-19354 | A vulnerability was found in lock-upme OPMS up to 831440f37a92c1568f2e071d5233bc873a9d8b09. The impacted element is an unknown function of the file controllers/messages/message.go of the component IN Clause Handler. Performing a manipulation of the argument ids results in sql injection. The attack is possible to be carried out remotely. This product adopts a rolling release strategy to maintain continuous delivery. Therefore, version details for affected or updated releases cannot be specified. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19355 | A vulnerability was determined in MingSoft MCMS up to 3.0.6. This affects the function ModelDataImpl.queryDiyFormData of the file /mdiy/form/data/list.do of the component ms-mdiy. Executing a manipulation of the argument formFields can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19356 | A vulnerability was identified in MingSoft MCMS up to 3.0.6. This impacts an unknown function of the file /mdiy/form/data/list of the component ms-mdiy. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19357 | A security flaw has been discovered in MingSoft MCMS up to 3.0.6. Affected is an unknown function of the file /mdiy/form/get of the component ms-mdiy. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19358 | A weakness has been identified in 3CORESec Trapdoor up to 1.2.2. Affected by this vulnerability is the function DefaultFunction. This manipulation causes improper access controls. The attack can be initiated remotely. The vendor was contacted early about this disclosure. |
| CVE-2026-19359 | A security vulnerability has been detected in nxp-auto-goldvip gvip up to 1.4.0. Affected by this issue is the function SitewiseCustomFunction of the component Lambda Function Handler. Such manipulation leads to improper access controls. The attack can be launched remotely. Upgrading to version 1.15.0 can resolve this issue. Upgrading the affected component is advised. The project explains: "The reported IAM permission configuration is a known historical issue that was already addressed in 2024, beginning with GoldVIP version 1.13.0. The permissions were updated in subsequent releases, including version 1.15.0. In addition, we also sent a request to either update or deprecate the older release in the AWS SAR application repository." |
| CVE-2026-19360 | A vulnerability was detected in wongcyrus ExcelLexBot up to 0.0.3. This affects the function ExcelLexBotS3TriggerFunction of the component Lambda Function Handler. Performing a manipulation results in improper privilege management. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. This vulnerability only affects products that are no longer supported by the maintainer. |
| CVE-2026-19361 | A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| CVE-2026-19362 | A vulnerability has been found in lmammino oidc-authorizer 0.4.0. This issue affects the function parse_token_from_header of the file src/parse_token_from_header.rs of the component Authorization Header Parsing. The manipulation of the argument authorization_token leads to denial of service. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19363 | A vulnerability was found in lmammino oidc-authorizer up to 0.4.0. Impacted is the function unwrap of the file src/handler.rs of the component Fixed Message Handler. The manipulation of the argument jwtClaims results in deserialization. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-19365 | A vulnerability was identified in Ichigo3766 image-gen-mcp 0.1.0. The impacted element is an unknown function of the file src/index.ts of the component upscale_images. Such manipulation of the argument output_path leads to path traversal. The attack must be carried out locally. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19366 | A flaw has been found in NocteDefensor LudusMCP up to 1.0.24. Affected is an unknown function of the file src/tools/insertCredsRangeConfig.ts of the component insert_creds_range_config. Executing a manipulation of the argument configPath/outputPath can lead to path traversal. The attack is restricted to local execution. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19367 | A vulnerability has been found in NocteDefensor LudusMCP 1.0.24. Affected by this vulnerability is an unknown functionality of the file src/tools/rangeConfig.ts of the component read_range_config. The manipulation of the argument Source leads to server-side request forgery. The attack may be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19368 | A vulnerability was found in PV-Bhat gemsuite-mcp 1.0.0. Affected by this issue is some unknown functionality of the file src/handlers/unified-gemini.ts of the component gemini_search/gemini_reason/gemini_process/gemini_analyze. The manipulation of the argument file_path/file_paths results in path traversal. The attack must be initiated from a local position. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19369 | A vulnerability was found in KS-GEN-AI jira-mcp-server 0.2.0. This affects the function axios.get of the file src/index.ts of the component add_attachment_from_public_url. The manipulation of the argument imageUrl results in server-side request forgery. The attack requires a local approach. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19370 | A vulnerability was determined in bartekke8it56w2 new-mcp 0.1.0. This impacts the function fs.writeFileSync/fs.existsSync/fs.readFileSync of the file index.ts of the component geminithinking. This manipulation of the argument sessionCommand/sessionPath causes path traversal. The attack requires local access. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19371 | A vulnerability was identified in Nikolaibibo claude-comfyui-mcp 1.0.0. Affected is the function copyFileSync of the file src/tools/utils.ts of the component comfy_upload_image. Such manipulation of the argument image_path leads to path traversal. An attack has to be approached locally. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19372 | A security flaw has been discovered in Handwriting-OCR handwriting-ocr-mcp-server 0.1.0. Affected by this vulnerability is the function fs.readFileSync of the file src/index.ts of the component upload_document. Performing a manipulation of the argument File results in path traversal. Attacking locally is a requirement. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19373 | A weakness has been identified in PhialsBasement KoboldCPP-MCP-Server 1.0.0. Affected by this issue is the function makeRequest of the file src/index.ts of the component BaseConfigSchema. Executing a manipulation of the argument apiUrl can lead to server-side request forgery. It is possible to launch the attack on the local host. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19375 | A vulnerability was detected in dmitriiweb article-scraper-mcp 1.0.0. This vulnerability affects the function fetch_article of the file news_scraper_mcp/server.py. The manipulation of the argument url results in server-side request forgery. The attack may be performed from remote. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-19376 | A vulnerability has been found in Uasoft Badaso 3.0.0-alpha. This vulnerability affects the function ApiRequest::class of the file src/Routes/api.php of the component File API. The manipulation leads to permission issues. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |