| CVE-2026-12553 | HP has identified a potential vulnerability in HP Web Jetadmin (WJA) that may allow an unauthenticated actor to read from or write to arbitrary files through a DLL hijacking mechanism. |
| CVE-2026-12630 | Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| CVE-2026-13202 | A vulnerability in OpenText Opentext Directory Services allows Input Data Manipulation.
This issue affects Opentext Directory Services: through 22.2. |
| CVE-2026-16137 | In Progress ShareFile Storage Zones Controller v5.12.5 and below, a party with valid zone credentials can perform path traversal using resumable upload initiation endpoint, allowing the party to write arbitrary content to any location writable by the application's service account. This may result in the execution of attacker-supplied code. |
| CVE-2026-16138 | In Progress ShareFile Storage Zones Controller v5.12.5 and below versions, unsafe deserialization of untrusted file metadata can allow a user with write access to a Network share to execute arbitrary code on the Storage Zones Controller host. |
| CVE-2026-16139 | In Progress ShareFile Storage Zones Controller versions <= 5.12.5 and <= 6.0.2, an authenticated zone administrator can exploit improper validation in the download preparation flow, enabling attacker-controlled files to be written outside the intended preparation directory. This can lead to remote code execution in v5 versions. Remote code execution is not confirmed on v6 versions. |
| CVE-2026-16467 | Missing Authorization vulnerability in Dolusoft Software Technologies Fortilogger allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Fortilogger: before 6.1.5.9. |
| CVE-2026-16471 | Missing Authorization vulnerability in Dolusoft Software Technologies Sonlogger allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Sonlogger: from v6.6.6 before 6.7.4.8. |
| CVE-2026-18674 | On a Kong Mesh global control plane, resources received over the zone-to-global KDS sync are attributed using the in-band, sender-controlled ControlPlane.Identifier rather than the authenticated zone identity derived from the connection. Authenticated zones can have the global control plane store and re-distribute those resources as belonging to another zone.
The result is a cross-zone isolation bypass: the holder of a single enrolled zone's credential can inject, attribute, and overwrite resources in another zone's namespace mesh-wide.
The root cause lives in Kuma's open-source KDS sync code, which Kong Mesh's control plane is built on. |
| CVE-2026-19693 | extract-zip through 2.0.1 containment-checks only the parent directory of each archive entry and never the entry's own final path component, so an archive containing two entries with identical names - a symlink whose target is outside the destination, followed by a regular file - writes through the planted symlink and yields an arbitrary file write outside the destination directory. |
| CVE-2026-28984 | The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-34399 | FreeCAD is a free and open-source multiplatform 3D parametric modeler. From 0.19 until 1.1.1, FreeCAD's BIM Workbench contains an eval() call on untrusted data from SVG template files. When a user creates a TechDraw page from a malicious SVG template, arbitrary Python code executes. The vulnerable code is in src/Mod/BIM/bimcommands/BimTDPage.py (line 87). This issue is fixed in version 1.1.1. |
| CVE-2026-34789 | FreeCAD is a free and open-source multiplatform 3D parametric modeler. Prior to 1.1.2, src/App/PropertyPythonObject.cpp in PropertyPythonObject::Restore() passes the attacker-controlled module attribute from serialized PropertyPythonObject XML directly to PyImport_ImportModule() while restoring a crafted FCStd document, which executes module-level Python code, and the legacy pickle branch also imports an attacker-controlled module and invokes its class constructor through PyObject_CallObject(). This issue is fixed in version 1.1.2. |
| CVE-2026-35219 | Budibase is an open-source low-code platform. Prior to 3.41.3, automation steps in packages/server/src/automations/steps/outgoingWebhook.ts, packages/server/src/automations/steps/zapier.ts, packages/server/src/automations/steps/n8n.ts, packages/server/src/automations/steps/slack.ts, and packages/server/src/automations/steps/discord.ts use node-fetch on user-provided URLs without the BLACKLIST_IPS enforcement used by the REST integration, allowing an authenticated user to make server-side requests to cloud metadata and internal services. This issue is fixed in version 3.41.3. |
| CVE-2026-39254 | Buffer Overflow vulnerability in SteelSeries GG (macOS) v.107.0.0 allows a remote attacker to execute arbitrary code via the libSSEdevice.dylib, CxAudioHidDevice::DeviceGetDescriptionString components |
| CVE-2026-39255 | Buffer Overflow vulnerability in SteelSeries GG (macOS) v.107.0.0 allows a remote attacker to execute arbitrary code via the libSSEdevice.dylib, dup_wcs components |
| CVE-2026-40144 | A memory-corruption vulnerability exists in a kernel-mode component of BeyondTrust Endpoint Privilege Management (Windows deployments) prior to version 26.1.2. Insufficient validation of input processed by the component may result in memory being accessed outside its intended bounds. |
| CVE-2026-40145 | A vulnerability exists in the interaction between a Endpoint Privilege Management (Windows Deployment) support utility and the agent's tamper protection controls. Under certain conditions, the protections applied to the utility process may not be enforced as intended. |
| CVE-2026-42162 | Mahara before 25.04.5 and 26.04.0 is vulnerable to artefacts being accessible to others under certain circumstances when the file path to an artefact in a page is manipulated. |
| CVE-2026-42163 | Mahara before 25.04.5 and 26.04.0 is vulnerable to unauthorized access to internal accounts via Learning Tools Interoperability (LTI) under certain circumstances. This applies to LTI 1.1 and LTI 1.3 Advantage. |
| CVE-2026-42164 | Mahara before 25.04.5 and 26.04.0 is vulnerable in the Text block/section functionality when a call is crafted in a certain way that allows it to recall the backed-up content from another Text section. |
| CVE-2026-43794 | A memory corruption issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to memory corruption. |
| CVE-2026-43795 | The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-44845 | JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to 4.10.17, an authenticated administrator with Applet Host management and deployment permissions can inject Jinja2 expressions into the IP/Host field or Core Service Address field, causing Ansible to evaluate ansible_host inventory data or playbook variables during Applet Host deployment and execute arbitrary commands on the JumpServer control node. This issue is fixed in version 4.10.17. |
| CVE-2026-44846 | JumpServer is an open source bastion host and an operation and maintenance security audit system. Prior to 4.10.17, a user with the users.invite_user permission can submit an existing member to POST /api/v1/users/users/invite/, causing the organization invitation logic in apps/users/api/user.py to execute user.org_roles.set(org_roles) and replace the member's existing organization roles, which can escalate privileges or downgrade administrators. This issue is fixed in version 4.10.17. |
| CVE-2026-45698 | Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the deletedir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. deletedir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to prevent buffer overflows by tracking available space in a size_t remain variable. However, the arithmetic used to compute remain results in an unsigned integer underflow, causing the variable to become SIZE_MAX. Because of this, the subsequent boundary check always evaluates as safe, allowing an unbounded strcpy() operation to copy attacker-controlled filenames into a nearly full stack buffer. Version 4.4.3 patches the issue. |
| CVE-2026-45790 | Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.6, Dokploy's organization.inviteMember tRPC procedure in apps/dokploy/server/api/routers/organization.ts allows a user with member:create permission to invite an account with the owner role, while packages/server/src/services/user.ts allows a privileged self-hosted user to create an account with an arbitrary role, enabling permanent organization takeover because owner roles cannot be demoted. This issue is fixed in version 0.29.6. |
| CVE-2026-45791 | Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.6, Dokploy's user.update procedure in apps/dokploy/server/api/routers/user.ts updates account.password without deleting other rows from session, allowing a compromised better-auth.session_token session to remain valid for up to three days after a password change. This issue is fixed in version 0.29.6. |
| CVE-2026-47683 | vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.6, the bufferAllocLimit enforcement in lib/setup-sandbox.js does not cover Buffer.concat(list, totalLength) or Buffer.from(arrayLike) with an attacker-controlled length, allowing sandbox code to perform large synchronous host external-memory allocations that bypass the configured cap and can exhaust the host process. This issue is fixed in version 3.11.6. |
| CVE-2026-47686 | vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.6, handleException() in lib/setup-sandbox.js sanitizes SuppressedError.error, SuppressedError.suppressed, and AggregateError.errors but does not sanitize Error.cause, allowing sandbox code to obtain a powerful host object such as process from an embedder-exposed host function that throws an error with that object as its cause and then execute arbitrary host commands. This issue is fixed in version 3.11.6. |
| CVE-2026-48053 | Kolibri is an offline-first education platform. Prior to version 0.19.4, several Kolibri API endpoints accept an unvalidated `baseurl` parameter and fetch attacker-controlled URLs from the Kolibri server, reflecting the response body back to the caller. The original report identified two endpoints on the `RemoteFacilityUser*` viewsets; remediation review found two further reflection points on the same pattern. The GET endpoint was unauthenticated. Version 0.19.4 fixes the vulnerability. |
| CVE-2026-50601 | A security vulnerability has been identified in the Planet9 desktop application where a hardcoded read-only API key permitted unauthorized access to internal repositories. An attacker could exploit this access to extract embedded administrative keys and secrets, potentially allowing them to gain administrative access to repository infrastructure and modify software source code. To mitigate this security risk, Acer has released an update to resolve the issue. |
| CVE-2026-50602 | A security vulnerability has been identified in Planet9 due to incorrect file permissions assigned to an application executable used by the Planet9 background service. The service runs with SYSTEM privileges, while the affected executable grants excessive permissions to non-administrative users. As a result, an authenticated local user could potentially modify or replace the executable and execute arbitrary code with SYSTEM privileges when the service starts or the system is restarted. |
| CVE-2026-50768 | File Upload vulnerability in T-Systems International GmbH ImageMaster Version: 9.14.2.8.1 allows a remote attacker to execute arbitrary code via the add attachments feature in the create new document function. |
| CVE-2026-50769 | The CRM+ application before and including version 2025.6 from Brainformatik is vulnerable to SQL Injection (time-based) vulnerability. The check conflict endpoint index.php?module=Appointments&action=CheckConflictOfDates&ajaxSkipHeader=true which is used to check any conflicts for user calendar is vulnerable to SQL injection allowing an attacker to execute arbitrary code. |
| CVE-2026-50770 | An issue in Squirro Cognitive Search before v.3.14.2 allows a remote attacker to escalate privileges via a crafted request. |
| CVE-2026-50771 | Cross Site Scripting vulnerability in Squirro Cognitive Search < 3.14.2 allows a remote attacker to execute arbtirary code via the Email Notification, Create Evaluation Sets and HTML Editor functions. |
| CVE-2026-50772 | An issue in Squirro Cognitive Search < 3.14.2 allows a remote attacker to execute arbitrary code via a crafted payload to the password reset function. |
| CVE-2026-50773 | An issue in CGM Germany - CompuGroup Medical CGM ISIS MED 2510.1.0.20 allows a remote attacker to execute arbtirary code via a crafted .dll file. |
| CVE-2026-50774 | An issue in GAPTEQ Designer v.3.5 allows a remote attacker to escalate privileges via the Company Manger role. |
| CVE-2026-50775 | A blind SSRF attack in DataHub v.1.5.0.1 allows a remote attacker to execute arbitrary code via the server retrieving an image from a crafted URL, and it fails to return the content or any errors directly. |
| CVE-2026-50776 | Directory Traversal vulnerability in Pronis Loisirs Billetterie CSE - < 04/2026 allows a remote attacker to obtain sensitive information and execute arbitrary code. |
| CVE-2026-51977 | An issue in Trueview T18061 WiFi 3MP Robot Pan-Tilt Security Camera Version 1.0 allows a physically proximate attacker to escalate privileges via the RSA private key component |
| CVE-2026-52886 | Notepad++ is a free and open-source source code editor. Prior to 8.9.7, Notepad++ validates the backupFilePath attribute from session.xml with std::wstring::starts_with against the expected backup directory without path normalization, allowing parent-directory sequences during snapshot-mode restoration to read an arbitrary user-readable file outside the backup directory into an editor tab. This issue is fixed in version 8.9.7. |
| CVE-2026-54284 | sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, TokenList construction and string conversion in sqlparse/sql.py repeatedly flatten nested token subtrees constructed by group_parenthesis and group_case, causing quadratic CPU consumption through sqlparse.parse(), sqlparse.format(), and sqlparse.split() before depth and token limits terminate processing. This issue is fixed in version 0.6.0. |
| CVE-2026-54336 | JumpServer is an open source bastion host and an operation and maintenance security audit system. From 4.8.0 until 4.10.17, an authenticated user with SFTP permission to an authorized asset can submit crafted traversal paths through the KoKo Web Terminal SFTP feature, causing AssetDir.GetRealPath() in pkg/srvconn/sftp_asset.go to resolve paths outside the intended SFTP root and permit read, list, write, rename, or delete operations under the configured backend account on that asset. This issue is fixed in version 4.10.17. |
| CVE-2026-56090 | Dell ObjectScale, versions prior to 4.3.0.1, contain(s) an Uncontrolled Search Path Element vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| CVE-2026-56677 | 9Router is an AI router & token saver. In 0.5.4 and earlier, the POST /api/auth/oidc/test endpoint in src/app/api/auth/oidc/test/route.js passes the user-controlled issuerUrl parameter to fetchOidcDiscovery() in src/lib/auth/oidc.js without restricting private or loopback destinations, allowing unauthenticated attackers when dashboard login is disabled to scan internal services and reflect OIDC discovery fields including token_endpoint and jwks_uri. |
| CVE-2026-57233 | Notepad++ is a free and open-source source code editor. Prior to 8.9.7, the WinGup decompress function joins untrusted ZIP entry names to unzipDestTo without canonical containment validation, allowing an entry such as ../mimeTools/mimeTools.dll to overwrite a DLL in a sibling plugin directory and execute attacker-controlled code when Notepad++ next loads that plugin. This issue is fixed in version 8.9.7. |
| CVE-2026-57485 | Stirling-PDF is a locally hosted web application that facilitates various operations on PDF files. Prior to 2.9.0, the /api/v1/pipeline/handleData endpoint in app/core/src/main/java/stirling/software/SPDF/controller/api/pipeline/PipelineProcessor.java injects the STIRLING-PDF-BACKEND-API-USER API key into pipeline subrequests, allowing an authenticated ROLE_USER to retrieve the key through /api/v1/user/get-api-key, impersonate the internal service account, bypass normal rate limits, and access internal endpoints including /api/v1/info/requests/all and /api/v1/info/load/all. This issue is fixed in version 2.9.0. |
| CVE-2026-59893 | sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, SQL_REGEX in sqlparse/keywords.py and the per-position loop in sqlparse/lexer.py repeatedly scan unmatched dollar-quoted literal and multiline-comment delimiters, causing quadratic CPU consumption through sqlparse.parse(), sqlparse.format(), and sqlparse.split(). This issue is fixed in version 0.6.0. |
| CVE-2026-59894 | sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, sqlparse/filters/output.py fails to escape existing backslashes before quotes in sqlparse.format output_format='python' and output_format='php' and the corresponding sqlformat -l modes, allowing crafted SQL to terminate the generated string and inject Python or PHP code when a downstream consumer executes or imports the generated source. This issue is fixed in version 0.6.0. |
| CVE-2026-59902 | Netty is an asynchronous, event-driven network application framework. Prior to 4.1.137.Final and 4.2.17.Final, io.netty.handler.codec.sctp.SctpMessageCompletionHandler limits incomplete messages and fragment counts but not maxBufferedBytes, allowing unauthenticated peers to exhaust memory with large SCTP fragments. This issue is fixed in versions 4.1.137.Final and 4.2.17.Final. |
| CVE-2026-59909 | Dell ObjectScale, versions prior to 4.3.0.1, contain(s) a Path Traversal vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information tampering. |
| CVE-2026-59910 | Dell ObjectScale, versions prior to 4.3.0.1, contain(s) an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| CVE-2026-59911 | Dell ObjectScale, versions prior to 4.3.0.1, contain(s) an Insertion of Sensitive Information into Log File vulnerability in the svc_tools. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information disclosure. |
| CVE-2026-61666 | websocket-driver is a WebSocket protocol handler with pluggable I/O. Prior to 0.8.2, WebSocket::Driver.server() passes a malformed Host header to URI.parse in lib/websocket/http/request.rb without catching URI::InvalidURIError, allowing a remote client to crash a TCP-backed WebSocket server when the application does not catch the error from parse(). This issue is fixed in version 0.8.2. |
| CVE-2026-62982 | Glances is an open-source system cross-platform monitoring tool. From 4.5.2 until 4.5.6, _sanitize_mustache_dict() in glances/actions.py skips nested list and dictionary strings such as process cmdline values, allowing pipe characters to survive chevron.render() and be executed by secure_popen() through administrator-configured action templates. This issue is fixed in 4.5.6. |
| CVE-2026-63178 | Onyx is an open-source AI platform. Prior to 4.3.0, Onyx Enterprise Edition's PATCH /manage/admin/user-group/{user_group_id} and POST /manage/admin/user-group/{user_group_id}/add-users endpoints in ee/onyx/server/user_group/api.py call update_user_group and add_users_to_user_group in ee/onyx/db/user_group.py without enforcing _validate_curator_can_modify_group, allowing a curator to add accounts to arbitrary groups and obtain document access through get_acl_for_user and the OpenSearch access_control_list filter. This issue is fixed in version 4.3.0. |
| CVE-2026-64657 | Budibase is an open-source low-code platform. Prior to 3.39.19, the PostgreSQL datasource connector in packages/server/src/integrations/postgres.ts interpolates the user-controlled schema configuration field into a SET search_path statement without escaping embedded double quotes, allowing an authenticated administrator who saves or tests the datasource to execute arbitrary SQL through the simple query protocol. This issue is fixed in version 3.39.19. |
| CVE-2026-64859 | New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.7, the admin user list and user lookup APIs, including GET /api/user/, return User.AccessToken as access_token because User model objects are serialized after queries use Omit("password"), allowing an authenticated administrator to obtain the root user's bearer token and access root-only system configuration APIs. This issue is fixed in version 1.0.0-rc.7. |
| CVE-2026-65329 | An authentication issue was addressed with improved state management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1. An attacker in a privileged network position may be able to bypass IPSec authentication and intercept network traffic. |
| CVE-2026-65330 | The issue was addressed with improved memory handling. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. An app may be able to cause unexpected system termination or corrupt kernel memory. |
| CVE-2026-65331 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65332 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65333 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65334 | A memory corruption issue was addressed with improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65335 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65336 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65337 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65338 | The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65339 | A logic issue was addressed with improved checks. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. An app may be able to leak sensitive user information. |
| CVE-2026-65340 | This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-65341 | The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to memory corruption. |
| CVE-2026-65343 | A use after free issue was addressed with improved memory management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. A remote attacker may be able to cause unexpected system termination. |
| CVE-2026-65346 | An integer overflow was addressed with improved input validation. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing an image may lead to arbitrary code execution. |
| CVE-2026-65347 | The issue was addressed with improved checks. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing an image may lead to a denial-of-service. |
| CVE-2026-65349 | An out-of-bounds read was addressed with improved input validation. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. An app may be able to cause unexpected system termination or read kernel memory. |
| CVE-2026-65351 | This issue was addressed through improved state management. This issue is fixed in iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| CVE-2026-68004 | An issue in OSSRS SRS (Simple Realtime Server) <v5.0.213 allows a remote attacker to execute arbitrary code via RTMP publish authorization, vhost-level security configuration (security.enabled), SrsSecurity::check(), trunk/src/app/srs_app_security.cpp, and SRS RTMP listener components |
| CVE-2026-68005 | An issue in ACME mini_httpd 1.30 and prior allows a remote attacker to cause a denial of service via the HTTP request header parser in the handle_request() function |
| CVE-2026-68520 | Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, as_dict_secure() in glances/config.py checks only option names and exposes public_username and credentials embedded in public_api values through unauthenticated GET /api/4/config and GET /api/4/config/ip requests. This issue is fixed in 4.5.6. |
| CVE-2026-68765 | hashcat master branch builds after v7.1.2 contain a heap buffer overflow vulnerability in the KeePass AESKDF/KDBX v4 module (module 34301) that allows attackers to corrupt adjacent heap memory by supplying an oversized ninth hash field token. The module accepts up to 600 hex characters for the ninth token field but decodes it into a fixed 256-byte buffer with no length check, allowing a maximal input to write up to 44 bytes past the buffer boundary into adjacent esalt fields and heap chunk metadata, potentially enabling heap corruption or memory access violations. |
| CVE-2026-70412 | Dell iDRAC9, versions prior to 7.20.30.50, and Dell iDRAC10, version prior to 1.20.60.50, contain a Remanent Data Readable after Memory Erase vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| CVE-2026-70495 | A flaw was found in search-v2-operator. This component's `search-serviceaccount` has overly broad permissions, allowing it to impersonate users and groups across the entire cluster. If an attacker gains access to any of the pods running under this service account, they could exploit this to achieve `system:masters` access, granting them full control over the cluster. |
| CVE-2026-71486 | vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the /v1/completions/derender and /v1/chat/completions/derender endpoints accept caller-supplied GenerateResponse objects whose generate_responses, choices, token_ids, prompt_logprobs, logprobs.content, top_logprobs, and routed_experts structures are processed by OnlineDerenderer and tokenizer.decode before max_model_len, max_tokens, max_num_seqs, or response-size limits are enforced, allowing an authenticated API client to consume excessive CPU and memory and produce oversized responses. This issue is fixed in version 0.26.0. |
| CVE-2026-71518 | Typemill before 2.26.0 contains an authorization bypass vulnerability in the media file download route that allows unauthenticated attackers to access restricted files by submitting path-equivalent URL variants. Attackers can substitute normalized path forms such as dot-slash prefixes, double slashes, or percent-encoded sequences to pass role-based restriction checks while the filesystem resolves the request to the protected file, enabling unauthorized file download without credentials. |
| CVE-2026-71553 | ApostropheCMS is an open-source Node.js content management system. In 4.32.0 and earlier, PATCH /api/v1/article/:id accepts the inherited path toString.call and passes it through the utility module to apos.util.set() and apos.util.get(), allowing an authenticated editor to overwrite the shared Object.prototype.toString function's call property and cause a persistent process-wide denial of service until restart. |
| CVE-2026-71566 | FakeFish handles incoming credentials by passing them down
to scripts. This works for real hardware because in the end it's up to
the BMC to validate them. However, KubeVirt relies on a KUBECONFIG file
mounted to the container and completely ignores the credentials. This allows any user of the cluster to control VMs of the
user that created fakefish, power them on and off, and mount arbitrary CD
images to them. |
| CVE-2026-71979 | INDI (Instrument Neutral Distributed Interface) indiserver through 2.2.4.2, fixed in commit 96bbd7f, contains a stack buffer overflow vulnerability that allows unauthenticated remote attackers to crash the daemon by sending malformed XML with mismatched tags whose names exceed 1024 bytes. Attackers can send a single TCP packet on port 7624 with mismatched XML tags to trigger an unbounded sprintf() write into a fixed 1024-byte stack buffer in MsgQueue.cpp, terminating the daemon and disrupting all active client and driver sessions. |
| CVE-2026-73410 | Budibase is an open-source low-code platform. Prior to 3.40.0, packages/backend-core/src/utils/outboundFetch.ts pinned a validated address through a Node agent, but the REST integration used getDispatcher from packages/backend-core/src/utils/fetch.ts, causing undici to ignore that agent and resolve the hostname again. A builder could use DNS rebinding to make packages/server/src/integrations/rest.ts connect to an internal address after a public address passed validation, with full response access and arbitrary REST methods. The fix adds createPinnedLookup support to the undici dispatcher and passes the validated address to custom fetch implementations. This issue is fixed in version 3.40.0. |
| CVE-2026-73424 | Astro is a web framework for content-driven websites. From 10.0.3 until 11.0.3, the Astro Vercel adapter in packages/integrations/vercel/src/serverless/entrypoint.ts accepts x_astro_path for the public /_isr function based only on the x-vercel-isr header, allowing unauthenticated GET requests to render routes protected only by Vercel edge path rules or split edge middleware. This issue is fixed in 11.0.3. |
| CVE-2026-73522 | COVESA Open1722 through 0.9.2 contains a stack buffer overflow vulnerability that allows unauthenticated remote attackers to write past the end of a fixed 15-slot stack array by sending a crafted UDP datagram containing more than 15 ACF-CAN messages. The avtp_to_can() function increments its write index without bounding it against the caller-supplied array size, and because the listener accepts datagrams from any sender matching a hardcoded unauthenticated stream ID transmitted in plaintext, attackers can corrupt adjacent stack memory to achieve arbitrary code execution or denial of service. |
| CVE-2026-73523 | COVESA Open1722 through 0.9.2 contains an integer truncation vulnerability in acf-can-listener.c that allows unauthenticated remote attackers to cause the CAN listener to transmit process stack memory onto the CAN bus by sending a rejected UDP datagram with a matching AVTP stream ID. The num_can_msgs variable declared as uint8_t truncates the -1 error return value from avtp_to_can() to 255, causing a write loop to iterate 255 times over a 15-slot stack array and leak approximately 18 KB of adjacent stack memory as roughly 240 CAN frames to any recipient on the CAN bus. |
| CVE-2026-73560 | vLLM is an inference and serving engine for large language models. Prior to 0.26.0, the MiMoV2OmniMultiModalProcessor in vllm/transformers_utils/processors/mimo_v2_omni.py passes attacker-controlled image and audio strings through _fetch_image, requests.get, and Image.open instead of MediaConnector, bypassing allowed_media_domains and allowed_local_media_path protections and allowing server-side requests and reads of arbitrary files accessible to the vLLM process. This issue is fixed in version 0.26.0. |
| CVE-2026-73646 | PostCSS takes a CSS file and provides an API to analyze and modify its rules by transforming the rules into an Abstract Syntax Tree. Prior to 8.5.18, lib/previous-map.js loadMap() passes attacker-controlled sourceMappingURL values to join(dirname(opts.from), annotation), and loadFile() permits traversed or absolute .map paths, allowing untrusted CSS processed without map: false to disclose sourcesContent from arbitrary reachable .map files through result.map. This issue is fixed in version 8.5.18. |
| CVE-2026-73851 | Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.34.0, an attacker who controls or tampers with the OpenAPI description consumed by Kiota can supply a file reference that resolves outside the manifest package (e.g. ../../../../etc/passwd, an absolute path, or a file:// / http(s):// URI). When the generated manifest is deployed and consumed by an AI host, this can lead to inclusion or disclosure of files outside the intended package boundary. This vulnerability is fixed in 1.29.1 and 1.34.0. |
| CVE-2026-74858 | A vulnerability has been found in jae-jae fetcher-mcp up to 0.3.9. Impacted is the function fetch_url/fetch_urls of the file /latest/meta-data/iam/security-credentials/ of the component URL Validation. Such manipulation leads to server-side request forgery. It is possible to launch the attack remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-74870 | openssl_encrypt (pip) versions <= 1.4.7 contain an information exposure vulnerability where the 'hsm fido2-test' and 'hsm onlykey-test' diagnostic commands unconditionally print the full derived hardware pepper as hex to stdout/stderr (crypt_cli.py, handle_hsm_command). The printed value can persist in terminal scrollback, session recordings, or CI logs. Impact is limited because the pepper is derived from a random per-invocation test salt and is salt-bound, so the leaked value cannot be used to decrypt real files. A related plugin issue logged raw prf_data outside the secret-redaction path. Fixed in 1.4.8 (and 1.5.0) by removing the hex dumps and routing plugin debug output through the redaction layer. |
| CVE-2026-74871 | openssl_encrypt versions before 1.4.6 contain a key derivation flaw in sequential XOR composition mode where the last stage cancels out during key generation. When configured with a single KDF and no prior hashing stage, attackers can bypass memory-hard key derivation and perform offline password cracking at SHA-256 speed instead of the configured KDF cost. |
| CVE-2026-74872 | openssl_encrypt versions before 1.4.0 contain an arbitrary code execution vulnerability in the Whirlpool hash implementation that uses broad glob patterns to load .so modules without integrity verification. Attackers can place malicious .so files matching the whirlpool*py313*.so pattern in site-packages directories to achieve native code execution when the module is loaded. |
| CVE-2026-74873 | openssl_encrypt versions before 1.4.0 expose passwords passed via the --password CLI argument in process listings accessible to all system users. Attackers can read process arguments through ps aux or /proc/[pid]/cmdline to retrieve plaintext passwords and keystore passwords. |
| CVE-2026-74874 | openssl_encrypt versions before 1.4.0 use Python's non-cryptographic random module for steganographic pixel selection in the generate_pseudorandom_sequence function. Attackers who know the password can recover the Mersenne Twister state from approximately 624 outputs and predict pixel locations containing hidden data for extraction. |
| CVE-2026-74875 | openssl_encrypt versions before 1.4.0 silently skip JSON schema validation when the jsonschema library is not installed, allowing malformed metadata to be accepted. Attackers can remove the jsonschema package or supply unknown metadata format versions to bypass all schema checks and process malicious data. |
| CVE-2026-74876 | openssl_encrypt versions before 1.4.0 contain a vulnerability in PublicKeyBundle.from_dict() that creates key bundles from untrusted data without verifying signatures. Attackers can call from_dict() followed by to_identity() without signature verification to encrypt data using attacker-controlled public keys, leaking secrets. |
| CVE-2026-74877 | openssl_encrypt versions before 1.4.0 contain a missing ownership verification vulnerability in the revoke_key method that allows authenticated clients to revoke any other client's key. Attackers can revoke arbitrary keys by providing a valid ML-DSA signature, bypassing the intended ownership restriction. |
| CVE-2026-74878 | openssl_encrypt versions before 1.4.0 use an in-memory rate limiter for TOTP brute-force protection that is not shared across workers and is lost on server restart. Attackers can distribute authentication attempts across multiple server instances or retry immediately after a restart to bypass rate limiting protections. |
| CVE-2026-74879 | openssl_encrypt versions before 1.4.0 contain an information disclosure vulnerability in the /ready endpoint that returns full database exception strings to unauthenticated callers. Attackers can trigger database errors to extract sensitive information including hostnames, IP addresses, connection parameters, and potentially credentials from exception messages. |
| CVE-2026-74881 | openssl_encrypt versions before 1.4.0 configure CORS with allow_origins set to wildcard and allow_credentials enabled to true. Attackers can create malicious websites that make authenticated cross-origin requests to the API on behalf of any user who visits them. |
| CVE-2026-74883 | openssl_encrypt versions before 1.4.0 contain a sandbox bypass vulnerability where the plugin sandbox fails to restrict alternative file access methods like pathlib.Path and io.open. Attackers can import pathlib or io modules to read and write arbitrary files, completely bypassing the restricted_open file access controls. |
| CVE-2026-74884 | openssl_encrypt versions before 1.4.0 contain a path traversal vulnerability in the _is_safe_path method where the plugin_id parameter is not sanitized before constructing the plugin config directory path. Attackers can declare a malicious plugin_id containing path traversal sequences like '../' to access arbitrary directories outside the intended plugin directory. |
| CVE-2026-74885 | openssl_encrypt versions before 1.4.0 contain a logging bug in restore_hidden_modules() that logs module counts after clearing, always showing zero restored modules and corrupting audit trails. Additionally, a race condition exists between module hiding and import hook installation where another thread could re-import blocked modules in multi-threaded environments. |
| CVE-2026-74886 | openssl_encrypt versions before 1.4.0 contain a plugin sandbox bypass vulnerability where the PluginImportGuard blocks a different set of modules than the AST analyzer's DANGEROUS_MODULES set. Attackers can bypass AST analysis through string obfuscation or encoding to import unblocked dangerous modules like sys, shutil, multiprocessing, importlib, and pickle for arbitrary code execution. |
| CVE-2026-74887 | openssl_encrypt before 1.4.0 imports Python's non-cryptographic 'random' module (Mersenne Twister PRNG) at line 15 of openssl_encrypt/modules/pqc.py. No direct calls to random.* were present in the code, so no cryptographic operation is currently affected; however, the import creates a hazard that future code could inadvertently use random.randint() instead of a cryptographically secure alternative (secrets/os.urandom), producing predictable values since the Mersenne Twister state can be recovered from approximately 624 outputs. Fixed by removing the import in 1.4.0. |
| CVE-2026-74888 | openssl_encrypt versions before 1.4.0 use a non-standard PBKDF2 key derivation construction with iterations=1 per call in an outer loop, creating a KDF whose security properties have not been formally analyzed. Attackers can exploit this weakened key derivation to more efficiently crack passwords protecting legacy encrypted files compared to standard PBKDF2 implementations. |
| CVE-2026-74889 | openssl_encrypt versions before 1.4.0 use HKDF with no salt and static info parameter in key normalization functions, reducing entropy extraction and determinism. Attackers can exploit predictable key derivation with identical inputs to weaken cryptographic security against multi-target attacks. |
| CVE-2026-75479 | JimuReport contains an authentication bypass vulnerability in the report folder template listing endpoint that allows unauthenticated attackers to enumerate all reports and retrieve share tokens. Attackers can use disclosed share tokens to access protected report endpoints and retrieve full report definitions including embedded SQL statements and live query data. |
| CVE-2026-75480 | OpenViking debug vector scroll and count endpoints apply only account-level scoping without user-level access controls, allowing authenticated users to read all co-tenant records. Attackers can query these endpoints to retrieve private memories, resources, skills, and secret material belonging to other users in the same account without administrative privileges. |
| CVE-2026-75481 | SkyPilot fails to validate that authenticated users are entitled to grant administrator roles when updating service account permissions. Attackers can create a service account, escalate it to administrator role, and authenticate with its bearer token to gain administrative control over all users and workspaces. |
| CVE-2026-75482 | SWE-agent's trajectory inspector (sweagent inspector), confirmed in v1.1.0, is an HTTP server that joins request paths to the trajectory directory in its /trajectory/ handler without rejecting parent-directory ('..') references, bypassing the built-in path sanitization. The server binds all interfaces (0.0.0.0), applies wildcard CORS, and requires no authentication. An unauthenticated network client (or a malicious web page via CORS) can use path traversal sequences to read files outside the intended directory. Because the read sink parses targets as trajectory JSON, disclosure is constrained to JSON files shaped like a trajectory, which can contain repository contents, command output, and secrets/API keys. |
| CVE-2026-75483 | powerlevel10k fails to neutralize control characters in the package.json version field when rendering the package prompt segment. Attackers can inject raw escape bytes in the version string to emit arbitrary terminal control sequences on each prompt render when the shell enters affected directories. |
| CVE-2026-75529 | Pandora is affected by a stored cross-site scripting vulnerability in the PDF download functionality. The /task-download/<task_id>/.../pdf endpoint verifies that the submitted file is a PDF using Pandora's content-based file-type detection, but previously returned the file using send_file(task.file.path) without explicitly specifying the MIME type or forcing it to be downloaded as an attachment.
Because Flask determines the response MIME type from the filename when a path is supplied, an attacker could submit a file whose content is recognized by Pandora as a PDF while its filename or extension causes the download endpoint to return it with a different, potentially active MIME type.
A specially crafted PDF/polyglot file could therefore be served inline and interpreted by a victim's browser as HTML or another executable web format. If a victim with access to the submitted analysis follows the PDF download link, attacker-controlled script could execute in the security context of the Pandora application, potentially allowing access to application data or actions using the victim's session.
The patch prevents the issue by explicitly returning PDF downloads with Content-Type: application/pdf, forcing Content-Disposition: attachment, and assigning a trusted .pdf filename based on the task UUID. |
| CVE-2026-75531 | Pandora contains a stored cross-site scripting (XSS) vulnerability in the rendering of URL observables. A URL extracted from or associated with an analyzed file was inserted directly into the inline JavaScript onclick handler used by the Submit to Lookyloo action.
Although the value was subject to HTML escaping by the template engine, it was embedded inside a JavaScript string within an HTML attribute. An attacker-controlled URL containing specially crafted characters could therefore break out of the JavaScript string and inject arbitrary JavaScript code.
The malicious script would execute in the context of the Pandora web application when a victim interacts with the affected Submit to Lookyloo control. Successful exploitation could allow an attacker to access information available to the victim's browser or perform actions using the victim's authenticated Pandora session.
The patch removes the observable value from the inline JavaScript handler. The URL is instead stored in an HTML data-url attribute and retrieved through the DOM dataset API when needed. Additional uses of innerHTML were also replaced with textContent as defensive hardening. |
| CVE-2026-9771 | The flash_copy() system call is verified by z_vrfy_flash_copy() in drivers/flash/flash_util.c. On builds with CONFIG_USERSPACE enabled, this handler is the kernel-side trust boundary for a user-mode caller. Prior to the fix it validated only the output buffer (K_SYSCALL_MEMORY_WRITE) and passed the two struct device * arguments, src_dev and dst_dev, directly into the implementation without any object validation — unlike every sibling flash syscall, which guards its device pointer with K_SYSCALL_DRIVER_FLASH.
A user-mode thread fully controls the values of src_dev/dst_dev and the contents of its own address space. The implementation z_impl_flash_copy() dereferences these pointers and calls through their driver-API function tables (e.g. api->get_parameters(dst_dev), flash_read(src_dev, ...), flash_write(dst_dev, ...)). By supplying a pointer to a forged struct device whose api table contains attacker-chosen function pointers, an unprivileged thread can cause the kernel to call arbitrary code in supervisor mode; passing any arbitrary or invalid address otherwise yields a kernel crash or out-of-bounds read.
The result is a local privilege escalation out of the userspace sandbox (with kernel denial-of-service and information disclosure as lesser outcomes). The fix adds K_SYSCALL_DRIVER_FLASH(src_dev, read) and K_SYSCALL_DRIVER_FLASH(dst_dev, write) to z_vrfy_flash_copy(), which verify each device is a registered flash-driver kernel object the calling thread is permitted to use before any dereference, closing the path completely. |