| CVE-2025-32781 | Apollo is a reliable configuration management system suitable for microservice configuration management scenarios. Prior to 2.5.0, Apollo Portal does not verify application and namespace permissions when an authenticated user requests a release by ID through GET /envs/{env}/releases/{releaseId} while configView.memberOnly.envs is enabled, allowing a low-privileged Portal user who obtains or guesses a valid releaseId to read configuration data from other applications and namespaces without calling UserPermissionValidator.shouldHideConfigToCurrentUser(...). This issue is fixed in version 2.5.0. |
| CVE-2025-65720 | An issue in Open Source GPT Researcher v3.3.7 allows attackers to execute arbitrary commands on a victim system via user interaction with a crafted HTML page. |
| CVE-2026-10673 | The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. |
| CVE-2026-15515 | A security vulnerability has been detected in Tencent PC Manager 18.1.30242.301. This issue affects some unknown processing in the library qmudisk64.sys of the component QMUDisk Driver. The manipulation leads to uncontrolled search path. The attack must be carried out locally. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| CVE-2026-15583 | A confused-deputy flaw in Grafana MCP Server allows an unauthenticated remote attacker to exfiltrate the server's environment-configured Grafana service-account token by supplying a crafted X-Grafana-URL request header. This also enables SSRF against arbitrary internal services, including cloud metadata endpoints. |
| CVE-2026-15619 | A weakness has been identified in mosaxiv clawlet up to 0.2.10. The impacted element is the function web_fetch of the file tools/tool_web_fetch.go of the component IPv4 Handler. This manipulation of the argument url causes server-side request forgery. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The reported GitHub issue was closed with the label "not planned". |
| CVE-2026-1562 | Pega Platform versions 8.1.0 through 25.1.2 are affected by an Stored Cross-site scripting (XSS) vulnerability in a user interface component. Requires a high privileged user with a developer role. |
| CVE-2026-1563 | Pega Platform versions 8.1.0 through 25.1.2 are affected by an Reflected Cross-site scripting (XSS) vulnerability in a user interface component. Requires a high privileged user with a developer role. |
| CVE-2026-15746 | Strands Agents is an open-source Python SDK for building and running AI agents. The strands-agents-tools package provides pre-built tools for use with the SDK, including the elasticsearch_memory tool for agent memory storage. We identified CVE-2026-15746, a server-side request forgery (SSRF) issue in the elasticsearch_memory tool. The tool exposed its connection parameters (es_url, cloud_id, api_key) as fields the large language model (LLM) could control through the tool schema. When a caller omitted the api_key parameter, the tool fell back to the operator's ELASTICSEARCH_API_KEY environment variable and sent it to whichever host the LLM specified. A crafted prompt could cause the tool to connect to a threat-actor-controlled server and disclose the operator's Elasticsearch API key in the Authorization header.
We recommend you upgrade to strands-agents-tools version 0.7.0 or later. As a precautionary measure, we recommend all operators rotate their ELASTICSEARCH_API_KEY, even if there is no indication the credential was exposed. |
| CVE-2026-15779 | A flaw was found in samba's pam_winbind. When mkhomedir is enabled, pam_winbind chowns the target account's home directory without validating the path is not a critical system directory such as /. On affected systems, accounts with / as their home directory (a common default for system accounts) can have this triggered not only by root, but by a non-root user holding a narrow sudo delegation to run commands as that account, causing ownership of / to change and resulting in severe denial of service (SSH, sudo, and package-manager failures). The change does not grant write access to / (which ships with restrictive 0555 permissions on RHEL), so the impact is availability loss rather than further privilege escalation. |
| CVE-2026-15804 | The HCM developed by MetaGuru has a SQL Injection vulnerability. Authenticated remote attackers can inject SQL commands via specific parameters, thereby compromising the confidentiality, integrity, and availability of database data. |
| CVE-2026-15809 | A flaw was found in CRI-O. The fix for a previous vulnerability (CVE-2022-4318) was incorrect, allowing it to be bypassed. An attacker capable of setting environment variables on a container can inject a newline character into the HOME environment variable. This issue allows the addition of arbitrary lines into /etc/passwd by use of a specially crafted environment variable. |
| CVE-2026-15895 | OS command injection in the npm package loading component in AWS jsii-diff before 1.131.0 might allow context-dependent attackers to execute arbitrary commands via crafted package specifiers passed to the npm: source argument.
To mitigate this issue, users should upgrade to jsii-diff v1.131.0 or later. |
| CVE-2026-15921 | Node Version Manager (nvm) is a POSIX-compliant shell function for managing multiple node.js versions. In versions 0.32.1 through 0.40.5, `nvm ls-remote` (and other commands that refresh remote LTS aliases, such as `nvm install --lts`) parse the node.js mirror's `index.tab` and use each release's LTS codename field as an alias filename without validating it. A malicious, compromised, or man-in-the-middled mirror can return an LTS codename containing path-traversal sequences such as `../../../.bashrc`, causing nvm to write the associated version string to a path outside `$NVM_DIR/alias`. With the default layout (`$NVM_DIR` is `~/.nvm`), this can create or overwrite files in the user's home directory, including shell startup files, which can lead to code execution in a later shell session. Exploitation requires the victim to use a hostile mirror -- via a compromised mirror or CDN, a network man-in-the-middle, or a maliciously configured `NVM_NODEJS_ORG_MIRROR`/`NVM_IOJS_ORG_MIRROR` -- and to run an affected command. Version 0.40.6 validates remote LTS codenames as safe alias filenames and rejects `..` path components when writing alias files. |
| CVE-2026-30618 | xszyou Fay 4.3.1 contains a remote code execution vulnerability in its MCP STDIO server management and command execution handling. A remote attacker can access the publicly exposed MCP management interface and configure an MCP STDIO server with attacker-controlled commands and parameters, resulting in execution of arbitrary commands on the server. Successful exploitation allows arbitrary command execution within the context of the Fay service. |
| CVE-2026-30623 | LiteLLM 1.18.10 contains a remote code execution vulnerability in its MCP server creation functionality. The application allows users to add MCP servers via a JSON configuration specifying arbitrary command and args values. LiteLLM executes these values on the host without validation, enabling attackers to run arbitrary operating system commands. Successful exploitation may result in remote code execution with the privileges of the LiteLLM process. |
| CVE-2026-33443 | CVE-2026-33443 is a memory management error in
Secure Access servers prior to 14.55. Attackers with an intimate knowledge of
and total control over the tunnel protocol can create a persistent DoS against
the server. |
| CVE-2026-33444 | CVE-2026-33444 is a memory management
vulnerability in Secure Access servers prior to 14.55. Attackers with intimate
knowledge of and total control over the tunnel protocol can create a
non-persistent DoS against the server. |
| CVE-2026-33445 | CVE-2026-33445 is a memory management
vulnerability in Secure Access servers prior to 14.55. Attackers with an
intimate knowledge of and total control over the tunnel protocol can create a
persistent DoS against the server. |
| CVE-2026-33684 | WWBN AVideo is an open source video platform. Prior to version 29.0, Privilege Escalation is possible through unguarded permission parameters in signUp API, which allows any user who can solve a CAPTCHA to self-grant elevated permissions during account registration. The set_api_signUp method in the API plugin accepts emailVerified, canUpload, canStream, and canCreateMeet parameters from user-supplied input and applies them to newly created accounts without verifying that the request was authenticated with a valid APISecret. By self-granting account attributes, attackers can mark their own accounts as email-verified without owning the address (bypassing email-gated functionality) and award themselves upload, streaming, and meeting-creation permissions, circumventing administrator access controls that intentionally restrict these capabilities for new users. This issue has been fixed in version 29.0 |
| CVE-2026-35152 | A SQL Injection vulnerability exists in Apache Fineract's Report Execution API (runreports endpoint) in versions up to and including 1.14.0. Report parameter values are incorporated into the generated SQL query without sufficient validation, allowing an authenticated user with permission to run reports to inject arbitrary SQL via crafted parameter values. This can be leveraged to perform unauthorized access to data beyond what the report was designed to expose. Users are recommended to upgrade to a version containing the fix. |
| CVE-2026-36590 | An issue in EMQ NanoMQ v.0.24.9 allows a remote attacker to cause a denial of service via the nni_qos_db_set function in broker_tcp.c component |
| CVE-2026-38752 | A stack overflow in the evaluate() function (editors/awk.c) of BusyBox commit 371fe9 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AWK script. |
| CVE-2026-38753 | A use-after-free in the awk_sub() function (editors/awk.c) of Busybox v1.38.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted AWK script. |
| CVE-2026-38754 | A heap overflow in the ifsbreakup() function (shell/ash.c) of Busybox v1.38.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input. |
| CVE-2026-38755 | A heap overflow in the evalcommand() function (shell/ash.c) of Busybox v1.38.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input. |
| CVE-2026-38974 | Dulwich through 1.1.0 was found to be missing SSH host key verification in contrib/paramiko_vendor.py. |
| CVE-2026-40501 | Cherry Studio versions 1.2.2 through 1.9.12, fixed in commit 1518530, contain a remote code execution vulnerability in SearchService that allows remote attackers to execute arbitrary code by delivering malicious JavaScript through controlled search provider content loaded into an Electron BrowserWindow configured with nodeIntegration enabled and contextIsolation disabled. Attackers who control a search engine provider, individual search result pages, or provider settings pages can execute JavaScript with full Node.js privileges, gaining access to fs, child_process, os, and process.env under the operating-system account of the Cherry Studio process. |
| CVE-2026-40952 | CVE-2026-40952 is a privilege misconfiguration
in the Secure Access installer for the Windows client and server prior to
version 14.55. Attackers with local access to the client or server can use it
to elevate privileges to Administrator when Secure Access is installed in a
non-default location. |
| CVE-2026-40953 | CVE-2026-40953 is a heap overflow in the
certificate parsing function of Secure Access clients prior to 14.55. Attackers
with local access and administrator permissions can create a denial of service
attack against the client over which they have control. |
| CVE-2026-40954 | CVE-2026-40954
is an integer underflow vulnerability in the traffic parsing function of Secure
Access clients prior to 14.55. Attackers with intimate knowledge of and total
control over the tunnel protocol can create a non-persistent DoS against their
client |
| CVE-2026-40955 | CVE-2026-40955 is an integer underflow
vulnerability in the traffic parsing function of Secure Access clients prior to
14.55. Attackers with intimate knowledge of and total control over the tunnel
protocol can create a non-persistent DoS against their client. |
| CVE-2026-40956 | CVE-2026-40956
is a memory disclosure vulnerability in Secure Access client versions prior to 14.55.
Attackers with intimate knowledge of and total control over the tunnel protocol
can cause a small amount of random memory to leak. |
| CVE-2026-40957 | o
CVE-2026-40957 is a frameable content
vulnerability in the Secure Access server login page prior to 14.55. Attackers
with control of a malicious web site could use it to potentially steal
credentials from an unwary administrator. |
| CVE-2026-40958 | CVE-2026-40958
is a input validation error in Secure Access clients prior to 14.55. Attackers
with intimate knowledge of and total control over the tunnel protocol can
create a non-persistent DoS against their client. |
| CVE-2026-42533 | A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and a string expression references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-45320 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase dashboard SQL variables such as ${deptId} are processed by SqlparserUtils.transFilter(), whose final branch returns raw user input for non-in and non-between operators before SubstitutedSql.replace("${var}", value) splices it into dashboard SQL, allowing authenticated users who can view a dashboard to inject SQL against integrated datasources. This issue is fixed in version 2.10.23 |
| CVE-2026-45337 | Better Auth is an authentication and authorization library for TypeScript. From 1.6.0 until 1.6.11, the deviceAuthorization plugin treats any authenticated session as the owner of any pending device code because GET /device does not claim the row and POST /device/approve and POST /device/deny short-circuit when userId is unset, allowing an authenticated attacker who learns a valid user_code to bind the polling device to the attacker's account or deny the legitimate flow. This issue is fixed in version 1.6.11. |
| CVE-2026-45533 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase export-center deletion can accept path traversal sequences such as ../ in the bulk delete API endpoint and pass attacker-controlled identifiers to ExportCenterManage.delete, allowing recursive deletion of arbitrary server directories through export task cleanup. This issue is fixed in version 2.10.23. |
| CVE-2026-45534 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase Redshift datasource connections can load attacker-controlled rsjdbc.ini configuration from System.getProperty("java.io.tmpdir"), setting socketFactory=org.springframework.context.support.FileSystemXmlApplicationContext so com.amazon.redshift.Driver#connect, com.amazon.redshift.Driver#getJdbcIniFile, and com.amazon.redshift.util.ObjectFactory#instantiate execute a reflection-based remote code execution chain during a normal JDBC connection through io.dataease.datasource.type.Redshift. This issue is fixed in version 2.10.23. |
| CVE-2026-45535 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase SQL-type datasets store attacker-controlled SQL variable defaultValue entries such as ${var} and SqlparserUtils.handleVariableDefaultValue() inserts them with String.replace() without escaping or parameterization, causing stored SQL injection whenever a user with dataset read permission accesses the dataset. This issue is fixed in version 2.10.23. |
| CVE-2026-45793 | Composer is a dependency Manager for the PHP language. Prior to 1.10.28, 2.2.28, and 2.9.8, Composer\IO\BaseIO::loadConfiguration() validates GitHub OAuth tokens with the regex ^[.A-Za-z0-9_]+$ and interpolates rejected tokens into an UnexpectedValueException; GitHub Actions GITHUB_TOKEN values using the ghs_<id>_<base64url-JWT> format can contain -, fail validation, and be disclosed to stderr or CI logs. This issue is fixed in versions 1.10.28, 2.2.28, and 2.9.8. |
| CVE-2026-45804 | Diffusers is the a library for pretrained diffusion models. Prior to 0.38.0, Diffusers' DiffusionPipeline.from_pretrained flow can bypass the trust_remote_code guard because download() validates model_index.json and custom pipeline code before later loading from a cached folder that can change, allowing a Hub repository with custom .py pipeline code to execute through the custom pipeline flow without passing custom_pipeline or trust_remote_code=True. This issue is fixed in version 0.38.0. |
| CVE-2026-45805 | Penpot is an open-source design tool for design and code collaboration. Prior to 2.15.0, Penpot MCP's mcp/packages/server/src/ReplServer.ts bound the ReplServer to 0.0.0.0:4403 and exposed an unauthenticated /execute endpoint that passed the code field to PluginBridge.executePluginTask(), allowing anyone on the network to execute JavaScript on the server. This issue is fixed in version 2.15.0. |
| CVE-2026-45806 | Penpot is an open-source design tool for design and code collaboration. Prior to 2.15.0, Penpot's remote image import passed the user-controlled url from frontend/src/app/main/data/workspace/media.cljs into the backend RPC method :create-file-media-object-from-url in backend/src/app/rpc/commands/media.clj, where media/download-image in backend/src/app/media.clj used the shared HTTP client without destination filtering, allowing an authenticated file editor to reach internal-only endpoints. This issue is fixed in version 2.15.0. |
| CVE-2026-46421 | The SAP Cloud Application Programming Model is a tool for building enterprise-grade cloud applications, and cap-js/cds-dbs is the monorepo for SQL database services for that tool. On April 29, 2026, compromised versions of `@cap-js/sqlite@2.2.2`, `@cap-js/postgres@2.2.2`, and `@cap-js/db-service@2.10.1` were published. The malicious packages harvested credentials and attempted self-propagation. If a compromised version was installed, all credentials accessible on that machine (npm tokens, cloud provider credentials, SSH keys, GitHub PATs) should be considered compromised. User should upgrade to `@cap-js/sqlite` >= 2.4.0, `@cap-js/postgres` >= 2.3.0, `@cap-js/db-service` >= 2.11.0. If a compromised version was ever installed, rotate all affected credentials. No known workarounds are available. |
| CVE-2026-46485 | Dashy is a self-hostable personal dashboard. Prior to 4.0.8, Dashy deployments using OIDC can allow unauthenticated users or non-admin authenticated users to write changes to the main config.yaml through the config-saving functionality despite configured permissions, allowing unauthorized modification of dashboard configuration and potential service disruption. This issue is fixed in version 4.0.8. |
| CVE-2026-46684 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase enterprise token handling can let TokenFilter#doFilter() pass X-DE-TOKEN values to TokenUtils.validate(), which checks only token presence and length before userBOByToken(token) uses JWT.decode() without signature verification, allowing forged tokens with chosen uid and oid values to be accepted when licenseValid=true. This issue is fixed in version 2.10.23. |
| CVE-2026-48795 | AdonisJS is a TypeScript-first web framework. From 10.1.3 until 10.1.5 and 11.0.3, AdonisJS @adonisjs/bodyparser incompletely fixed CVE-2026-25754 because nested multipart field payloads such as user.__proto__.polluted and constructor.prototype still caused lodash _.set() via @poppinss/utils to create plain intermediate objects and pollute Object.prototype. This issue is fixed in versions 10.1.5 and 11.0.3. |
| CVE-2026-48799 | Postiz is an AI social media scheduling tool. Prior to 2.21.8, Postiz fails to verify Nowpayments IPN callback authenticity against the payment provider shared secret and reads the target subscription identifier from the untrusted request body, allowing a low-privileged account to grant arbitrary organizations lifetime PRO subscriptions without payment. This issue is fixed in version 2.21.8. |
| CVE-2026-49352 | 9Router is an AI router & token saver. From 0.2.21 until 0.4.44, 9Router used the hardcoded fallback JWT secret 9router-default-secret-change-me in src/app/api/auth/login/route.js, src/middleware.js, and later src/lib/auth/dashboardSession.js, allowing attackers to forge an auth_token cookie when JWT_SECRET was unset. This issue is fixed in version 0.4.44 |
| CVE-2026-49867 | DataEase is an open source data visualization and analysis tool. Prior to 2.10.23, DataEase template static resources let authenticated users submit TemplateManageRequest.staticResource through POST /de2api/templateManage/save or DataVisualizationServer.decompression, after which StaticResourceServer.saveFilesToServe and StaticResourceServer.saveSingleFileToServe write Base64-decoded .svg content to /de2api/static-resource/<name>.svg without validating extension, MIME type, decoded bytes, or SVG scriptability, causing stored same-origin cross-site scripting when a victim loads the resource. This issue is fixed in version 2.10.23. |
| CVE-2026-50182 | WWBN AVideo is an open source video platform. Versions prior to 29.0 contain an unauthenticated Reflected XSS vulnerability through AVideo YouTubeAPI Gallery Pagination. The $_GET['search'] query parameter is concatenated directly into the href attribute of two pagination links in plugin/YouTubeAPI/gallerySection.php (lines 67 and 74) with no htmlspecialchars, no urlencode, and no allow-list check. An injected <script> element is then extracted by the AVideo Layout plugin and concatenated into a single trailing inline script block at the bottom of the page, where the browser executes it. Any unauthenticated attacker can lure a victim into following a crafted URL to execute arbitrary JavaScript under the AVideo origin, which can read non-HttpOnly cookies and issue authenticated AJAX requests as the victim, and when the victim is an administrator, it can perform any cookie-authenticated admin action (create user, promote to admin, change configuration, install plugin), escalating a single click into full administrative takeover. This issue has been patched by this commit: https://github.com/WWBN/AVideo/commit/f50fc033b7adb36f1ffd6640e7826468bdafdec3. |
| CVE-2026-50183 | WWBN AVideo is an open source video platform. Versions 29.0 and below contain a stored Cross-Site Scripting vulnerability in the YouTubeAPI plugin. The plugin renders the snippet.title field returned by the YouTube Data API into the homepage gallery markup with no HTML encoding. The title is set by the YouTube video uploader (anyone in the world) and is treated by AVideo as trusted content. A YouTube uploader who controls a video matching the operator's configured query injects HTML into the AVideo homepage by setting their video's title to a JavaScript-bearing string; the payload then executes in the browser of every visitor who loads any page that renders the gallery. When the visitor is an AVideo administrator, the injected JavaScript performs any admin action (create user, promote to admin, change configuration, install plugin) that uses cookie-based authentication without an additional CSRF token, escalating the bug into full administrative takeover. The payload persists for the duration of cacheTimeout (default 3600 seconds) after the malicious title is set on YouTube and survives YouTube removing the hostile video for the same window. This issue has been addressed by commit https://github.com/WWBN/AVideo/commit/7292129eaee5f609beae103b5cb387d55f17b877. |
| CVE-2026-50562 | FastGPT is a knowledge-based AI application platform. At commit 22ebfacbb43311e9b73294040ae0eb87390c6bba and earlier, artifacts built from untrusted pull request code in .github/workflows/preview-docs-build.yml and .github/workflows/preview-fastgpt-build.yml can be downloaded by privileged workflow_run jobs in .github/workflows/preview-docs-push.yml and .github/workflows/preview-fastgpt-push.yml, allowing attacker-controlled Docker images from the document/ tree or FastGPT build context to be pushed to GHCR and, for documentation previews, deployed with secrets.KUBE_CONFIG_CN. |
| CVE-2026-52842 | Lightpanda is a headless browser designed for AI and automation. Prior to 0.3.1, Lightpanda searched for @ across the entire URL string instead of only the authority component when computing a page origin, so a URL such as `http://attacker.com/@victim.com/` was fetched from attacker.com but treated as `http://victim.com`, allowing a complete Same-Origin Policy bypass. This issue is fixed in version 0.3.1. |
| CVE-2026-52843 | Lightpanda is a headless browser designed for AI and automation. Prior to 0.2.9, Lightpanda fetch() and XMLHttpRequest unconditionally attached session cookies to every HTTP request, ignoring credentials: omit, credentials: same-origin, credentials: include, and XMLHttpRequest.withCredentials, allowing an attacker-controlled origin in a Lightpanda session to issue authenticated cross-origin requests against a victim origin. This issue is fixed in version 0.2.9. |
| CVE-2026-52865 | When NGINX Ingress Controller processes Ingress or TransportServer resources, an authenticated, remote attacker with permission to create or modify Ingress or TransportServer resources can cause the NGINX Ingress Controller process to terminate.
Impact:
The NGINX Ingress Controller control plane process terminates and enters a persistent crash loop while the malformed Ingress or TransportServer resource remains in the cluster. This vulnerability allows a remote, authenticated attacker with at least Ingress or TransportServer resource write access to cause a denial-of-service (DoS) on the NGINX Ingress Controller system. There is no data plane exposure; this is a control plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-52869 | The MCP Python SDK, called mcp on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to 1.27.2, the SSE and stateful Streamable HTTP transports mcp.server.sse.SseServerTransport and mcp.server.streamable_http_manager.StreamableHTTPSessionManager route requests to existing sessions using only the session_id query parameter or Mcp-Session-Id header without verifying the authenticated principal that created the session, allowing a different bearer-token-authenticated client with a known session ID to inject JSON-RPC messages into that session. This issue is fixed in version 1.27.2. |
| CVE-2026-52870 | The MCP Python SDK, called mcp on PyPI, is a Python implementation of the Model Context Protocol (MCP). From 1.23.0 until 1.27.2, default handlers installed by server.experimental.enable_tasks() for tasks/list, tasks/get, tasks/result, and tasks/cancel operate only on task identifiers without recording the session that created each task, allowing any connected client to enumerate, read results from, consume messages for, or cancel other clients' tasks. This issue is fixed in version 1.27.2. |
| CVE-2026-52887 | NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.0.61, NocoBase @nocobase/plugin-notification-in-app-message exposed GET /api/myInAppChannels:list, where the filter[latestMsgReceiveTimestamp][$lt] value was inserted into a Sequelize.literal() template string without escaping or parameter binding, allowing a signed-up authenticated user to run stacked PostgreSQL statements and potentially execute commands with COPY ... TO PROGRAM. This vulnerability is fixed in 2.0.61. |
| CVE-2026-52888 | NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. In 2.0.59 and earlier, NocoBase @nocobase/plugin-collection-sql used the checkSQL() function in packages/plugins/@nocobase/plugin-collection-sql/src/server/utils.ts with an incomplete keyword blacklist that did not restrict PostgreSQL system catalog tables such as pg_shadow, pg_roles, and pg_stat_activity, allowing an admin-role user to read password hashes and database metadata through the SQL Collection feature. This vulnerability is fixed in 2.1.0-alpha.46. |
| CVE-2026-52890 | Wekan is open source kanban built with Meteor. Prior to 9.31, Wekan allows a logged-in board member to insert an attachment document through the /attachments/insert DDP method with attacker-controlled versions.original.path and versions.original.storage fields. The server/permissions/attachments.js insert rule checks only board write access, and FileStoreStrategyFilesystem.getReadStream() in models/lib/fileStoreStrategy.js streams the stored path without a storage-root containment check, allowing arbitrary file reads and denial of service through special files such as /dev/zero. This issue is fixed in version 9.31. |
| CVE-2026-52891 | Wekan is open source kanban built with Meteor. Prior to 9.07, Wekan avatar upload functionality embeds user-supplied filenames into paths later passed to child_process.exec() for MIME-type detection. Because models/avatars.js and models/fileValidation.js used a shell command with the avatar filename, shell metacharacters such as backticks and $() in the filename could execute commands on the server. This issue is fixed in version 9.07. |
| CVE-2026-52892 | Wekan is open source kanban built with Meteor. Prior to 9.32, Wekan REST handlers in server/models/customFields.js use read-level Authentication.checkBoardAccess instead of write-level Authentication.checkBoardWriteAccess for mutating custom-field routes. A read-only board member can call POST, PUT, and DELETE handlers for /api/boards/:boardId/custom-fields and custom-field dropdown items to create, update, or delete board custom fields. This issue is fixed in version 9.32. |
| CVE-2026-52893 | Wekan is open source kanban built with Meteor. Prior to 9.32, the Wekan Accounts.onCreateUser hook in server/models/users.js merges OIDC logins into existing accounts when the OIDC email or username matches an existing Wekan user, without verifying ownership or checking email_verified. An attacker using an OIDC provider account with a victim's email or username can cause Wekan to merge the attacker's OIDC credentials into the victim account and then log in as that account. This issue is fixed in version 9.32. |
| CVE-2026-53512 | Better Auth is an authentication and authorization library for TypeScript. Prior to 1.6.11, the legacy oidcProvider and mcp plugins expose OAuth token endpoints whose refresh_token grant authenticates only possession of the bound refreshToken row and matching client_id, without verifying the confidential client's client_secret, allowing an attacker with a valid refresh_token to mint access tokens and rotated refresh tokens through /api/auth/oauth2/token or /api/auth/mcp/token. The @better-auth/oauth-provider package is not affected. This issue is fixed in version 1.6.11. |
| CVE-2026-53513 | Better Auth is an authentication and authorization library for TypeScript. Prior to 1.6.11, the @better-auth/sso plugin's POST /sso/register and POST /sso/update-provider endpoints accept attacker-controlled oidcConfig.userInfoEndpoint, tokenEndpoint, and jwksEndpoint URLs when skipDiscovery: true is set, store them on the ssoProvider row without origin validation, and fetch them during OIDC callback, allowing non-blind server-side request forgery and possible account linking when trustEmailVerified: true is configured. This issue is fixed in version 1.6.11. |
| CVE-2026-53514 | Better Auth is an authentication and authorization library for TypeScript. Prior to 1.6.11, and in 1.6.14 and later when invitation IDs can be obtained outside the invited mailbox and requireEmailVerificationOnInvitation: true is not enabled, the organization plugin's acceptInvitation, rejectInvitation, getInvitation, and listUserInvitations recipient endpoints use session.user.email and an invitation ID without sufficient verified-email ownership proof, allowing a user with an unverified session for the invited email address to accept an organization invitation after obtaining the invitation ID. This issue is fixed for the original default behavior in version 1.6.11, while 1.6.14 restored compatibility for built-in opaque invitation IDs and leaves affected configurations requiring secure options. |
| CVE-2026-53515 | Better Auth is an authentication and authorization library for TypeScript. From 1.2.10 until 1.6.11, the @better-auth/sso plugin's POST /sso/register endpoint lets any organization member attach a new SSO provider to that organization because registerSSOProvider checks only for a membership row and does not require an owner or admin role, allowing attacker-controlled OIDC or SAML providers to drive /sso/callback/{providerId} organization provisioning. This issue is fixed in version 1.6.11. |
| CVE-2026-53516 | Better Auth is an authentication and authorization library for TypeScript. Prior to 1.6.11, Better Auth's OAuth callback auto-link gate in handleOAuthUserInfo accepts implicit account linking when the OAuth provider asserts email_verified: true without requiring the local user row's emailVerified field to also be true, allowing an attacker who pre-registers a victim email through /sign-up/email to bind the victim's OAuth identity to the attacker's account. The same primitive affects one-tap, and emailAndPassword.requireEmailVerification: true does not mitigate the link-time verification change. This issue is fixed in version 1.6.11. |
| CVE-2026-53517 | Better Auth is an authentication and authorization library for TypeScript. From 1.4.8-beta.7 until 1.6.11, the @better-auth/oauth-provider POST /oauth2/token endpoint on the refresh_token grant performs a non-atomic read, validate, revoke, and mint sequence on the oauthRefreshToken row, allowing concurrent requests with the same parent refresh token to pass the revoked check and create forked refresh-token families; the vulnerable range also includes embedded better-auth plugin versions before 1.6.0. This issue is fixed in version 1.6.11. |
| CVE-2026-53518 | Better Auth is an authentication and authorization library for TypeScript. From 1.6.0 until 1.6.11, the @better-auth/oauth-provider POST /oauth2/token endpoint for the authorization_code grant redeems a single-use authorization code through a non-atomic find-then-delete sequence, allowing two concurrent requests to pass the read step and mint independent access tokens, refresh tokens, and ID tokens; legacy /oauth2/token and /mcp/token paths in oidc-provider and mcp plugins share the same primitive. This issue is fixed in version 1.6.11. |
| CVE-2026-54052 | n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. Prior to 2.56.1, in HTTP mode with multi-tenancy enabled through ENABLE_MULTI_TENANT=true, n8n-mcp's local workflow version history backups were not isolated per tenant, allowing an authenticated tenant to read workflow version snapshots belonging to other tenants and delete or destroy other tenants' stored backups, including full node definitions, credential references, and authorization headers. This issue is fixed in version 2.56.1. |
| CVE-2026-54560 | Cloudreve is a self-hosted file management and sharing system. From 4.12.0 until 4.16.1, Cloudreve's OAuth access tokens are issued without the OAuth client_id claim, so the JWT verifier does not load token scopes into request context and RequiredScopes treats the request like non-scoped session authentication, allowing a low-scope OAuth access token to call APIs requiring higher scopes such as file, share, workflow, user setting, WebDAV account, and potentially admin scopes. This issue is fixed in version 4.16.1. |
| CVE-2026-54562 | Cloudreve is a self-hosted file management and sharing system. Prior to 4.16.1, Cloudreve's remote download workflow accepts user-supplied URLs at POST /api/v4/workflow/download and passes them to the configured downloader without blocking loopback, localhost, IPv6 localhost, or redirect-to-loopback targets, allowing a non-admin user with remote download permission to fetch internal-only URLs and read the response after it is imported into the user's own files. This issue is fixed in version 4.16.1. |
| CVE-2026-54563 | Cloudreve is a self-hosted file management and sharing system. Prior to 4.16.1, a Cloudreve WebDAV account rooted at a configured folder can send paths such as /dav/%2e%2e/outside.txt because stripPrefix in pkg/webdav/webdav.go joins the decoded request suffix to the account root with fs.URI.JoinRaw without checking containment, allowing the scoped credential to read and list files outside the configured folder and writable credentials to create, overwrite, move, or delete them. This issue is reported as fixed in version 4.16.1. |
| CVE-2026-55234 | Wekan is open source kanban built with Meteor. Prior to 9.37, Wekan DDP update allow rules in server/permissions/cards.js, server/permissions/lists.js, and server/permissions/swimlanes.js authorize against the stored source boardId and do not validate a new boardId in the update modifier. Any authenticated user with write access to their own board can call /cards/update, /lists/update, or /swimlanes/update to move cards, lists, or swimlanes into a private board they are not a member of. This issue is fixed in version 9.37. |
| CVE-2026-55242 | ERPNext is a free and open source Enterprise Resource Planning tool. Prior to 15.111.0 and 16.22.0, an authenticated user with a standard operational role can trigger server-side template injection through a configuration field, resulting in unauthorized disclosure of data outside the user's normal permission scope. This issue is fixed in versions 15.111.0 and 16.22.0. |
| CVE-2026-55398 | CVE-2026-55398
is a memory management vulnerability in Secure Access clients and servers prior
to 14.55. Attackers with intimate knowledge of and total control over the
tunnel protocol can create a non-persistent DoS against the server. |
| CVE-2026-55399 | CVE-2026-55399 is a resource exhaustion
vulnerability in the Secure Access publisher prior to 14.55. Attackers with
valid credentials to the Secure Access tunnel can create a non-persistent DoS
against the publisher. |
| CVE-2026-55410 | NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.1.19, NocoBase @nocobase/plugin-backups restored PostgreSQL backups by interpolating the database.schema value from _metadata.json into shell command strings executed with Node.js child_process.exec(), allowing a backup-management user restoring a crafted backup to execute commands as the NocoBase server process. This vulnerability is fixed in 2.1.19. |
| CVE-2026-55608 | n8n-MCP is an MCP server that provides AI assistants access to n8n node documentation, properties, and operations. Prior to 2.57.4, multi-tenant HTTP mode with ENABLE_MULTI_TENANT=true could allow an authenticated tenant to access default-scope workflow_versions backups instead of being confined to the tenant scope, exposing or deleting workflow-version backups from prior single-tenant deployments or migrations. This issue is fixed in version 2.57.4. |
| CVE-2026-55652 | Wekan is open source kanban built with Meteor. Prior to 9.46, header-login with HEADER_LOGIN_TRUSTED_IPS uses getRequestIp() in server/lib/headerLoginAuth.js to trust the client-supplied X-Forwarded-For header before the real socket address, allowing an unauthenticated attacker to send HEADER_LOGIN_ID for any username and receive a meteor_login_token session, including for admin. This issue is fixed in version 9.46. |
| CVE-2026-56352 | n8n before 2.19.3 contains a file path restriction bypass in the legacy ExecuteWorkflow node's localFile source option, which reads workflow files from disk without the file-access checks enforced by other file-reading nodes. Although hidden from the UI since v1.2, it remains reachable via the REST API. An authenticated user with permission to create or modify workflows can supply an arbitrary file path to bypass the N8N_RESTRICT_FILE_ACCESS_TO restriction and determine whether arbitrary files exist on the host; where the targeted path contains a valid workflow JSON file, that file can additionally be loaded and executed. |
| CVE-2026-56353 | n8n contains an authentication bypass in the Chat Trigger node when configured with n8n User Auth (a non-default configuration). In affected releases — before 1.123.22, the 2.0.0 through 2.9.2 line, and 2.10.0 — the authentication check on the Chat Trigger webhook endpoint can be circumvented, allowing access without valid credentials. Fixed in 1.123.22, 2.9.3, and 2.10.1. |
| CVE-2026-56398 | Open WebUI before 0.9.5 contains a stored cross-site scripting vulnerability in the OAuth authentication flow where the picture claim URL MIME type is inferred from file extension rather than Content-Type header, allowing SVG files to bypass the profile image validator and be stored as data URIs. Authenticated users who visit the profile image endpoint receive attacker-controlled SVG content with inline disposition and no default security headers, enabling script execution in the same origin to steal authentication tokens and achieve account takeover. |
| CVE-2026-56400 | open-webui before 0.3.14 contains a cross-origin resource sharing misconfiguration allowing arbitrary origins with allow_origins=* and authenticated requests to the /api/v1/functions endpoint. Attackers can execute arbitrary code on the openwebui instance by crafting malicious cross-site requests from attacker-controlled websites when an admin user visits them. |
| CVE-2026-56678 | 9Router is an AI router & token saver. Prior to 0.5.6, the Kiro API-key validation endpoint POST /api/oauth/kiro/api-key builds an upstream URL using a user-controlled region value, allowing an authenticated attacker to supply a crafted region such as kiro-canary.local:8443# and cause 9Router to send the Kiro validation request to an attacker-controlled host while forwarding the submitted Kiro API key as an Authorization header. This issue is fixed in version 0.5.6. |
| CVE-2026-56679 | 9Router is an AI router & token saver. Prior to 0.5.4, the PATCH /api/settings endpoint writes the entire request body to persistent settings without a field whitelist, allowing an authenticated user to set security-critical fields such as requireLogin and disable authentication for the whole application, exposing protected routes such as /api/keys and /api/providers to unauthenticated access. This issue is reported as fixed in version 0.5.4. |
| CVE-2026-56742 | Cilium is a networking, observability, and security solution. Prior to 1.17.17, 1.18.11, and 1.19.5, Cilium clusters using Gateway API allow users with permissions to create or update namespaced HTTPRoutes to mirror HTTP traffic to any Service in any namespace, bypassing the ReferenceGrant authorization mechanism. Gateway API functionality is disabled by default. This issue is fixed in versions 1.17.17, 1.18.11, and 1.19.5. |
| CVE-2026-56764 | Hono before 4.11.10 contains a timing attack vulnerability in the basicAuth and bearerAuth middlewares due to non-constant-time string comparison in the timingSafeEqual function. Attackers can exploit early termination of string equality checks to infer valid credentials through precise timing measurements. |
| CVE-2026-57821 | A SQL Injection vulnerability exists in Apache Fineract's Office Search API (GET /api/v1/offices) in versions up to and including 1.14.0. The orderBy request parameter is concatenated into a SQL query without sufficient validation, allowing an authenticated user with permission to view offices to inject arbitrary SQL via a crafted orderBy value. This is a bypass of the ColumnValidator fix introduced for CVE-2024-32838, which does not detect bare subqueries in the ORDER BY position. This can be leveraged to perform time-based blind SQL injection for data exfiltration. Because the injected query blocks the database connection for its full duration, concurrent exploitation can exhaust the application's database connection pool, resulting in denial of service for other users. Users are recommended to upgrade to a version containing the fix. |
| CVE-2026-58549 | Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58550 | Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58551 | Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58552 | Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58553 | Out-of-bounds read vulnerability in the image codec module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58554 | Permission control vulnerability in the Settings module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58555 | Permission bypass vulnerability in the card module. Impact: Successful exploitation of this vulnerability may affect availability. |
| CVE-2026-58556 | Permission control vulnerability in the Bluetooth module. Impact: Successful exploitation of this vulnerability may affect availability. |
| CVE-2026-58557 | Design defect vulnerability in Expedition mode. Impact: Successful exploitation of this vulnerability may affect availability. |
| CVE-2026-58558 | Permission control vulnerability in the file system. Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| CVE-2026-58559 | DoS vulnerability in the vibration service. Impact: Successful exploitation of this vulnerability may affect availability. |
| CVE-2026-58655 | The bundled Grav Flex Objects plugin (getgrav/grav-plugin-flex-objects) before 1.4.0 contains a stored server-side template injection vulnerability. When rendering dynamic collection or object titles, the plugin passes user-controlled frontmatter values (page.header.flex.collection.title or page.header.flex.object.title) to Twig's template_from_string(), causing them to be evaluated as Twig code rather than treated as text. This path bypasses Grav's Security::cleanDangerousTwig() sanitization. An attacker who can control the title frontmatter of a publicly reachable Flex Objects page can achieve arbitrary Twig execution and escalate to remote command execution via access to internal Grav services such as the scheduler. |
| CVE-2026-58658 | GPUStack through 2.2.1, fixed in commit 4e20551, contains an unauthenticated information disclosure vulnerability that allows unauthenticated attackers to access sensitive inference logs and modify worker configuration by exploiting unprotected /serveLogs and /debug endpoints on the worker port. Attackers can enumerate model instance IDs to stream serving logs containing prompts and completions, change log levels, and read memory profiling data without any authentication. |
| CVE-2026-58659 | PyTorch Lightning through 2.6.5, fixed in commit d710d68, contains a remote code execution vulnerability in the _load_state function that imports and executes attacker-controlled module names from checkpoint _instantiator hyperparameters. Attackers can craft malicious checkpoint files that bypass weights_only=True protections to execute arbitrary code when LightningModule.load_from_checkpoint is called. |
| CVE-2026-58660 | Kanboard through 1.2.52, fixed in commit 564cc30, BoardAjaxController save() method (used by the kanban board drag-and-drop endpoint) validates the caller's role on the attacker-supplied project_id but never verifies that the supplied task_id actually belongs to that project. Because task identifiers are sequential integers shared across the entire instance, any authenticated user who is a member of at least one project can enumerate and move (corrupt/hide) tasks belonging to any other project on the same instance, including private projects they have no membership or role on. |
| CVE-2026-59254 | n8n before 2.28.1 contains an information disclosure vulnerability where external secrets are incorrectly resolved in workflow node expressions outside credentials scope. Authenticated project editors can read plaintext external secret values by referencing them in node expressions without requiring explicit secrets access permissions. |
| CVE-2026-59255 | BloodHound through 9.4.0, fixed in commit 8f79035, contains a missing authorization vulnerability in the custom-nodes API endpoints that allows any authenticated user to modify the global graph schema. Attackers with valid session tokens can create, update, or delete custom node types affecting all users and tenants by invoking unprotected POST, PUT, and DELETE operations on the custom-nodes endpoints. |
| CVE-2026-59258 | immich before 3.0.3 contains a broken access control vulnerability in the PUT /albums/:id/user/:userId endpoint that allows shared album editors to modify member roles without owner-only restrictions. Attackers with editor access can demote the album owner to editor and promote themselves to owner in sequential requests, gaining full control including deletion and eviction capabilities. |
| CVE-2026-59259 | n8n before versions 1.123.61, 2.27.4, and 2.28.1 contains a permission bypass vulnerability in external secrets handling caused by a mismatch between the static validation check and the runtime expression engine. An authenticated user with credential create or update permissions but without the externalSecret:list scope can embed external secret references into credentials in forms the static validation does not detect; these references resolve at workflow execution time, exposing secret values the user is not authorized to access. This issue only affects instances where an external secrets provider is configured and Advanced Permissions are in use. |
| CVE-2026-59762 | When an HTTP/2 profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization.
Impact:
System performance can degrade until the TMM process is either forced to restart or is manually restarted. This vulnerability allows a remote, unauthenticated attacker to cause a degradation of service that can lead to a denial-of-service (DoS) on the BIG-IP system. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-59838 | A improper neutralization of script-related html tags in a web page (basic xss) vulnerability in Fortinet FortiSIEM 7.4.0, FortiSIEM 7.3.0 through 7.3.4, FortiSIEM 7.2.0 through 7.2.6, FortiSIEM 7.1 all versions, FortiSIEM 7.0 all versions, FortiSIEM 6.7 all versions, FortiSIEM 6.6 all versions, FortiSIEM 6.5 all versions, FortiSIEM 6.4 all versions may allow attacker to execute unauthorized code or commands via <insert attack vector here> |
| CVE-2026-59950 | The MCP Python SDK, called mcp on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to 1.28.1, the deprecated mcp.server.websocket.websocket_server transport accepted WebSocket handshakes without applying Host or Origin header validation, leaving no SDK-level way to restrict which origins could connect to applications that exposed that transport. This issue is fixed in version 1.28.1. |
| CVE-2026-60005 | NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart.
Impact:
This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-60062 | The NGINX Agent config_dirs directive allows a low-privileged attacker to gain limited read and write access to files outside of the designated secure directory. The config_dirs directive required for this issue can also be configured through NGINX Instance Manager. A successful exploit may allow an attacker to cross a security boundary.
Impact:
A remotely authenticated low-privileged attacker could gain limited read and write access outside of the list of directories specified in the NGINX Agent configuration.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-60065 | When NGINX Plus is configured to use the Message Queuing Telemetry Transport (MQTT) filter module (ngx_stream_mqtt_filter_module), unauthenticated attackers can send requests with conditions beyond the attacker's control to cause a heap buffer over-read in the NGINX worker process, leading to a restart.
Impact:
This vulnerability may allow remote unauthenticated attackers to have limited control to restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-61371 | Microsoft AVML before 0.17.0 could follow a symlink when opening a destination output path on Unix, allowing truncation/overwrite of the symlink target. The destructive effect is performed at open-time via O_TRUNC, and can happen before full input validation completes (“truncation-before-validation”). |
| CVE-2026-61440 | PraisonAI Platform before 0.1.9 fails to properly authorize label and issue-label mutations, allowing workspace members to rename and recolor shared labels and add or remove labels on owner-created issues. Attackers with workspace member privileges can exploit PATCH and POST/DELETE endpoints to alter shared label taxonomy and manipulate issue-label associations without owner or admin authorization. |
| CVE-2026-61443 | PraisonAI before 1.6.78 contains a remote code execution vulnerability in SkillTools.run_skill_script() that executes scripts without path containment validation. Attackers can supply absolute file paths to execute arbitrary scripts from any filesystem location, including those outside the intended working directory. |
| CVE-2026-61446 | PraisonAI (praisonaiagents) before 1.6.78 contains a remote code execution vulnerability in the plugin manager, which loads and executes arbitrary Python (.py) files from project-level and user-home .praisonai/plugins/ directories using importlib spec_from_file_location() and exec_module() without code signing, integrity verification, or sandboxing. An attacker who can write a malicious .py file to a plugin directory (for example via path traversal, a supply chain attack, or a compromised dependency) achieves arbitrary code execution when the plugin system initializes. |
| CVE-2026-61449 | Grav 2.0.1 contains a decompression-bomb size-cap bypass in ZipArchiver and GPM\Installer. The size bound introduced in 2.0.1 sums the uncompressed size declared in each entry's ZIP central-directory header (ZipArchive::statIndex()['size']) and rejects archives exceeding system.gpm.archive.max_uncompressed_size before extraction. Because this declared size is attacker-forgeable and is not cross-checked against the actual inflated stream, a crafted archive declaring tiny per-entry sizes passes the cap while extractTo() writes the real, much larger content, filling disk or exhausting inodes. The archive must be supplied by a package source or admin upload (admin/operator trust). Fixed in 2.0.2. This is an incomplete fix for GHSA-928x-9mpw-8h56. |
| CVE-2026-61451 | The Grav API plugin (grav-plugin-api) before 1.0.4 does not validate the origin of the client-supplied admin_base_url field in the POST /api/v1/auth/forgot-password endpoint. The sanitizeHttpUrl() function only checks that the URL scheme is http/https and never verifies the host against the server's own origin, so an attacker can supply an arbitrary host. As a result, an unauthenticated attacker can cause the password reset email sent to a victim to contain a reset link pointing at an attacker-controlled server; when the victim follows the link, the valid reset token is disclosed to the attacker, enabling full account takeover. The vulnerable base URL can also be influenced via the Referer or Origin headers. |
| CVE-2026-61452 | The Grav API plugin (getgrav/grav-plugin-api) before 2.0.4 contains an improper session invalidation vulnerability where JWT access tokens are issued without a jti (JWT ID) claim and therefore cannot be revoked server-side. Unlike refresh tokens, access tokens remain valid for their full lifetime (default 1 hour) regardless of logout, password change, new token issuance, or account disablement. An attacker who has stolen an access token retains full API access until the token naturally expires. |
| CVE-2026-61453 | Grav v2.0.0 contains a cross-site scripting vulnerability (fixed in 2.0.1). The XSS blueprint validator (Security::detectXss()) runs on raw page content before Twig processing. When Twig content processing is enabled (twig_content.process_enabled: true), an attacker with page-write API permission can use Twig's string concatenation operator (~) to dynamically construct event handler names, dangerous tag names, or dangerous protocols at render time (e.g. {% set x = "on" ~ "error" %}). The validator sees only the harmless Twig expression and allows the content, but after Twig rendering the output (rendered via {{ page.content|raw }}) contains an active payload such as <img src=1 onerror=alert(1)>, executing arbitrary JavaScript in visitors' browsers. |
| CVE-2026-61457 | The Grav API plugin (getgrav/grav-plugin-api) before 1.0.3 contains a file upload extension bypass in the API media controller. HandlesMediaUploads::validateFileExtension() inspects only the final file extension via pathinfo($filename, PATHINFO_EXTENSION), so a user with api.media.write permission can upload a file with a double extension such as shell.php.jpg to bypass the dangerous extensions blocklist. The web server may then execute the file as PHP, resulting in remote code execution. |
| CVE-2026-61613 | Cursor is a code editor built for programming with AI. Prior to the Cloud Agent fix on 03/31/2026, browser-enabled Cursor Cloud Agent sessions allowed attacker-controlled web content to connect from inside the agent container to an unauthenticated local agent endpoint, enabling code execution within the affected Cloud Agent sandbox or session and access to files, repository contents, environment variables, credentials, and GitHub App access tokens available to that session. This issue was fixed on 03/31/2026 by requiring authentication for the relevant agent endpoint. |
| CVE-2026-61643 | FastGPT is a knowledge-based AI application platform. From 4.14.17 until 4.15.0-beta5, an authenticated FastGPT user can save a workflow node that points to another user's private HTTP toolset by using a crafted saved tool id such as http-<victim_toolset_app_id>/<tool_name>. The normal toolset routes deny access, but the workflow save and runtime path did not apply the same authorization check to the referenced toolset, allowing /api/v2/chat/completions to resolve the saved reference and execute the victim-owned HTTP tool. This issue is fixed in version 4.15.0-beta5. |
| CVE-2026-61644 | FastGPT is a knowledge-based AI application platform. From 4.14.17 until 4.15.0-beta5, the POST /api/core/chat/record/getCollectionQuote endpoint authenticates the caller's chat and collection context, but the initialId center-node lookup is not bound to that authorized context. A low-privileged tenant user can call the endpoint with valid attacker-owned appId, chatId, chatItemDataId, and collectionId values while supplying another tenant's dataset data id as initialId, causing the response to include foreign dataset quote or full-text content. This issue is fixed in version 4.15.0-beta5. |
| CVE-2026-61646 | FastGPT is a knowledge-based AI application platform. Prior to 4.15.0-beta5, FastGPT's shared SSRF guard validates only the initial request URL before handing the request to axios, and axios follows redirects by default. An authenticated workflow user can configure an HTTP request node to call an attacker-controlled public URL that redirects to cloud metadata, loopback, or internal services that the guard would block on direct request, and the HTTP node returns the response body to the workflow caller. This issue is fixed in version 4.15.0-beta5. |
| CVE-2026-61684 | FastGPT is a knowledge-based AI application platform. In 4.15.0-beta4, FastGPT plugin invoke reverse-call endpoints under /api/invoke/* authenticate only by verifying a JWT signed with INVOKE_TOKEN_SECRET, which defaults to the constant string token and was not set in official deployment templates. An unauthenticated attacker can self-sign an HS256 JWT and reach /api/invoke/userInfo to disclose cross-tenant user PII by attacker-supplied tmbId values, or /api/invoke/fileUpload to write attacker-controlled content into chat files. This issue is fixed in version 4.15.0-beta5. |
| CVE-2026-61736 | LightRAG provides simple and fast retrieval-augmented generation. Prior to 1.5.4, the server defaults to CORS_ORIGINS=* combined with allow_credentials=True in lightrag/api/lightrag_server.py, causing Starlette CORSMiddleware to effectively whitelist every origin for credentialed cross-origin requests. Any malicious website visited by an authenticated LightRAG user can silently make authenticated API requests, exfiltrating documents and knowledge graph data or performing destructive actions such as deleting the document store. This vulnerability is fixed in 1.5.4. |
| CVE-2026-61740 | LightRAG provides simple and fast retrieval-augmented generation. Prior to 1.5.4, when LightRAG is deployed with LIGHTRAG_API_KEY set but AUTH_ACCOUNTS unset, X-API-Key protection can be bypassed because lightrag/api/auth.py falls back to a hardcoded DEFAULT_TOKEN_SECRET, /auth-status and /login can mint guest JWTs, and combined_dependency in lightrag/api/utils_api.py accepts a valid guest token before checking the API key. A remote unauthenticated attacker can call endpoints guarded by combined_auth, including document read, upload, deletion, graph mutation, and query endpoints. This vulnerability is fixed in 1.5.4. |
| CVE-2026-61828 | Nixpkgs is a collection of software packages that can be installed with the Nix package manager. Prior to the 25.11 and 26.05 channel fixes, the NixOS module for MySQL services.mysql initializes the MySQL database in a way that allows local users, such as unprivileged web or CGI processes on the same host, to log in as the root user without a password when the service is used with mysql or percona-server. This issue is fixed in the 25.11 and 26.05. |
| CVE-2026-61835 | Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, the SSRF protection on Directus's file-import-from-URL feature can be bypassed using the address 0.0.0.0 because api/src/request/is-denied-ip.ts treats 0.0.0.0 as a keyword for local interfaces but never blocks the literal address itself. On Linux and macOS, connecting to 0.0.0.0 reaches localhost, so an authenticated user with file-upload rights can make the server fetch internal services through the /files/import endpoint and retrieve the response as a downloadable file. This issue is fixed in version 12.0.0. |
| CVE-2026-61836 | Directus is a real-time API and App dashboard for managing SQL database content. Prior to 12.0.0, when response caching is enabled, the cache-key derivation in api/src/utils/get-cache-key.ts includes version, path, query, and accountability.user but omits authorization context such as share, role, roles, admin, app, and policies. Directus share tokens and anonymous requests can both reduce to user null, so different shares or anonymous clients requesting the same URL and query can receive a permission-filtered cached response without permission re-evaluation. This issue is fixed in version 12.0.0. |
| CVE-2026-61859 | ImageMagick before 7.1.2-26 and 6.9.13-x before 6.9.13-51 contains a policy bypass vulnerability in the -script operation due to missing security policy checks. This allows reading files from paths that are otherwise disallowed by the configured security policy. |
| CVE-2026-61871 | ImageMagick before 7.1.2-26 and 6.9.13-51 contains a memory leak in the ICON decoder that occurs when a memory allocation fails. Processing a crafted ICON file that triggers an allocation failure leaks memory, which may lead to a denial of service. |
| CVE-2026-61872 | ImageMagick before 7.1.2-26 and 6.9.13-51 contains a memory leak in the TIFF encoder when an invalid tiff:tile-geometry is specified. Supplying malformed tile geometry parameters causes allocated memory not to be released, which can lead to increased memory consumption. |
| CVE-2026-61873 | Grav before 9.1.8 contains an arbitrary file write vulnerability in the Form plugin's process.save.filename parameter, which is validated against path traversal before Twig processing but never re-validated after rendering. Attackers can submit form data containing path traversal sequences that are processed through Twig templates, allowing them to write arbitrary files including PHP webshells to the web root or other sensitive directories. |
| CVE-2026-62294 | Flameshot is powerful yet simple to use screenshot software. Prior to 14.0.0, the Open With feature wrote screenshots to a predictable temporary path and followed symlinks, creating a time-of-check to time-of-use race that allowed a local unprivileged attacker on the same machine to pre-plant a symlink and cause Flameshot to write PNG data through it, overwriting any file the victim user could write. This issue is fixed in version 14.0.0. |
| CVE-2026-62348 | TDengine is a time-series database optimized for Internet of Things devices. Prior to 3.4.1.15, TDengine Enterprise allowed an authenticated low-privilege SQL user to run KILL SSMIGRATE <id> against an active shared-storage migration because mndProcessKillSsMigrateReq called mndKillSsMigrate while the intended MND_OPER_SSMIGRATE_DB privilege check was commented out. This issue is fixed in version 3.4.1.15. |
| CVE-2026-62349 | TDengine is an open source, time-series database optimized for Internet of Things devices. In 3.4.1.6 and earlier, source/libs/parser/src/parUtil.c trimString() checks space for only one byte before processing SQL string escape sequences \%, \_, or \x, allowing a one-byte out-of-bounds write to the stack buffer tmpTokenBuf that can cause denial of service and potentially remote code execution. This issue is fixed in version 3.4.1.14. |
| CVE-2026-62350 | TDengine is an open source, time-series database optimized for Internet of Things devices. Prior to 3.4.1.15, a user with create udf privilege could upload a crafted shared library and install it as a user-defined function, such as eval, then execute arbitrary C code on the TDengine server side through database queries. This issue is fixed in version 3.4.1.15. |
| CVE-2026-62351 | TDengine is a time-series database optimized for Internet of Things devices. Prior to 3.4.1.15, source/libs/transport/src/transComm.c transDecompressMsg() read STransCompMsg.contLen when pHead->comp == 1 without first validating that the RPC packet contained the 8-byte STransCompMsg structure, causing an unauthenticated out-of-bounds read, uncontrolled allocation, integer underflow, and server crash. This issue is fixed in version 3.4.1.15. |
| CVE-2026-62353 | TDengine is a time-series database optimized for Internet of Things devices. Prior to 3.4.1.14, source/libs/parser/src/parTokenizer.c tGetToken() incremented past a trailing backslash in a SQL string literal such as 'abc\ and read one byte beyond the null terminator, allowing an authenticated user who can submit SQL queries to crash the server and possibly leak adjacent memory. This issue is fixed in version 3.4.1.14. |
| CVE-2026-62355 | TDengine is an open source, time-series database optimized for Internet of Things devices. Prior to 3.4.1.15, a Data Reader admin_user on a TDengine Cloud DB instance could run create udf even though standard users should have read-only permissions for non-database objects and show dnodes and create user were denied. This issue is fixed in version 3.4.1.15. |
| CVE-2026-62361 | listmonk is a standalone, self-hosted, newsletter and mailing list manager. Prior to 6.2.0, listmonk’s GET /api/subscribers/export endpoint injects the user-controlled query parameter into QuerySubscribersForExport in internal/core/subscribers.go without calling validateQueryTables, unlike GET /api/subscribers, allowing an authenticated user with subscribers:sql_query and subscribers:get_all to read arbitrary database tables such as users and settings and execute data-modifying PostgreSQL CTEs. This issue is fixed in version 6.2.0. |
| CVE-2026-62378 | RustFS Console is a web management console for the RustFS distributed file system. From 0.1.7 until 0.1.10, the RustFS Console components/object/preview-modal.tsx and components/object/pdf-viewer.tsx extension-based PDF preview path can render HTML content uploaded as .pdf, allowing stored cross-site scripting in the management console and exposure of administrator AccessKeyId, SecretAccessKey, and SessionToken values. This is caused by a regression of CVE-2026-27822. This vulnerability is fixed in 0.1.10. |
| CVE-2026-62683 | File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.17, File Browser can leave a public directory share behind when the shared directory is deleted through a path with a trailing slash because the share cleanup path calls DeleteWithPathPrefix(file.Path, userID) and the Bolt backend performs the database prefix query with the unnormalized path before trimming the slash for boundary checks, so deleting /a/ does not delete the stored /a share and the stale public share exposes future content if the same path is recreated. This issue is fixed in version 2.63.17. |
| CVE-2026-62685 | File Browser is a file managing interface for uploading, deleting, previewing, renaming, and editing files within a specified directory. Prior to 2.63.17, File Browser builds new user scopes from usernames passed through cleanUsername() when Signup=true and CreateUserDir=true, but the many-to-one normalization can collapse usernames such as team/one, team one, and team-one to the same home directory without checking whether the resulting scope is already taken, allowing a second registrant to gain full read and write access to another user's files. This issue is fixed in version 2.63.17. |
| CVE-2026-62947 | OpenWrt is a Linux operating system targeting embedded devices. Prior to 25.12.5, the cgi-download handler in cgi-io authorizes the requested path against the caller's ubus session file ACL before canonicalization, and rpcd session.c uses fnmatch() without FNM_PATHNAME, allowing traversal such as an allowed wildcard prefix followed by ../ to read root-readable files including /etc/shadow. This vulnerability is fixed in 25.12.5. |
| CVE-2026-62948 | OpenWrt is a Linux operating system targeting embedded devices. Prior to 25.12.5, odhcpd writes a DHCPv6 client FQDN option 39 hostname into /tmp/odhcpd.leases through src/statefiles.c statefiles_write_state6() and statefiles_write_state4() without escaping, allowing newline injection of forged lease lines that LuCI rpcd-mod-luci getDHCPLeases displays through htdocs/luci-static/resources/view/status/include/40_dhcp.js and htdocs/luci-static/resources/luci.js dom.append as live HTML in the Active DHCPv6 Leases admin page. This vulnerability is fixed in 25.12.5. |
| CVE-2026-9770 | Kasa EC71 v4 and EC70 v4 firmware contains a static cryptographic private key stored in a read-only filesystem
that is shared across devices. An
attacker with access to the firmware image can extract the embedded key.
Successful
exploitation may allow an unauthenticated attacker on the same network to use
this key in the web management service, compromising the confidentiality of
encrypted communications. This may enable passive decryption of traffic or
active man-in-the-middle (MITM) attacks |