| CVE-2025-5802 | The self-registration flow accepts user-supplied input for usernames without adequately preventing the disclosure of username existence. When a user attempts to register with an existing username, the system responds with an error message that explicitly indicates the username is already in use.
This behavior allows an attacker to discover valid usernames within the system. The discovery of valid usernames can facilitate subsequent attacks such as brute force, social engineering, and targeted phishing campaigns. |
| CVE-2026-0170 | In Vp9DecodeFrameTag of vp9hwd_headers.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0171 | In multiple locations, there is a possible out-of-bounds write due to a logic error in the code. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0177 | In do_sss_aes_gcm_256_op of crypto-aes.c, there is a possible out-of-bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0179 | In Bootloader, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0183 | In CPM, there is a possible information disclosure due to a confused deputy. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0186 | In ac_init_one_sswrp of init.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0187 | In gsa_sw_pk_hash_compare of image-auth-srv.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0189 | In ac_init_policy of init.c, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0192 | In Bootloader, there is a possible escalation of privilege due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0194 | In multiple locations, there is a possible permission bypass due to an integer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0197 | In VPU, there is a possible information dislclosure due to a logic error in the code. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-0199 | In gf_ta_test_set_config of gf_ta_test.c, there is a possible out-of-bounds write due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-10144 | Rsbuild before 2.0.9 contains a command injection vulnerability that allows attackers to execute arbitrary OS commands by supplying a crafted URL containing shell metacharacters to the server.open configuration on macOS. The openBrowser() function in packages/core/src/server/open.ts passes the URL through encodeURI() before interpolating it into a shell command executed via child_process.exec(), but because encodeURI() does not encode dollar signs, parentheses, or semicolons, embedded shell metacharacters are evaluated by /bin/sh, enabling arbitrary command execution. |
| CVE-2026-12101 | IBM Verify Identity Access could allow an administrator to execute additional commands they are not entitled to due to improper validation of user supplied requests. |
| CVE-2026-12358 | IBM Verify Identity Access could allow a remote attacker to cause a denial of service due to insufficient validation of incoming request resources. |
| CVE-2026-12750 | IBM Cloud Pak for Business Automation is vulnerable to stored cross-site scripting. This vulnerability allows an authenticated user to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. |
| CVE-2026-12751 | IBM Cloud Pak for Business Automation is vulnerable to HTML injection. A remote attacker could inject malicious HTML code, which when viewed, would be executed in the victim's Web browser within the security context of the hosting site. |
| CVE-2026-16140 | OpenBMC's IPMI implementation, phosphor-net-ipmid, is vulnerable to a logic flaw where the authorization context of an existing session can be replaced with a target account while still maintaining the original integrity and encryption keys. Several downstream vendors implement phosphor-net-ipmid as their IPMI stack, such as NVIDIA and H3C. This issue effectively allows for privilege escalation without re-authentication. |
| CVE-2026-16141 | OpenBMC's IPMI implementation, phosphor-net-ipmid, contains a logic flaw in which an unauthenticated client can force the RAKP Message 1 handler to return before it overwrites the authentication object's constructor defaults. The IPMI service then accepts a RAKP Message 3 whose HMAC is computed with the constant 20-byte 'userKey' initialized from the string '0penBmc' and an often-predictable 'bmcRandomNum'. Several downstream vendors implement phosphor-net-ipmid as their IPMI stack, such as NVIDIA and H3C. |
| CVE-2026-1758 | Session fixation vulnerability in Secomea GateManager (webserver module) allows Session Fixation.
This issue affects GateManager: 11.5;0, 11.4.625515072:0.
Fixed in Version 11.6 or 11.4.626194074 and above |
| CVE-2026-1759 | Improper handling of insufficient permissions or privileges vulnerability in Secomea GateManager allows Privilege Escalation.
This issue affects GateManager: 11.5;0, 11.4.625515072:0.
Fixed in Version 11.6 or 11.4.626194074 and above |
| CVE-2026-19504 | Fabric.js loadFromJSON Server-Side Request Forgery Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of Fabric.js. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the implementation of the loadFromJSON method. The issue results from the lack of proper validation of a URI prior to accessing resources. An attacker may be able to leverage this vulnerability to gain improper access to network resources. Was ZDI-CAN-29318. |
| CVE-2026-19515 | The WSO2 Integrator MI VS Code extension fails to properly sanitize or validate user-supplied input when processing Micro Integrator projects opened from untrusted sources. This allows a crafted project to inject and execute arbitrary operating system commands through the unit test execution flow.
Successful exploitation of this vulnerability could lead to the execution of arbitrary OS commands on the system where the VS Code extension is running. The extent of the impact is dependent on the privileges of the user account under which VS Code is operating. Exploitation requires the user to grant workspace trust to the malicious project and subsequently trigger the unit test execution. |
| CVE-2026-19885 | OriginLab Origin Viewer OGWU File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab Origin Viewer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGWU files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated data structure. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29337. |
| CVE-2026-19886 | OriginLab Origin Viewer OGM File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab Origin Viewer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29340. |
| CVE-2026-25825 | An issue was discovered in Keyfactor SignServer before 7.6.0. The output file to which SignerStatusReportWorker logs the report can be set to any path, even one that points to a file that already exists. This gives a user (with admin access) the possibility to write files in arbitrary directories in the server filesystem and potentially overwrite files accessible by the local user JBoss. |
| CVE-2026-25826 | An issue was discovered in Keyfactor SignServer before 7.6.0. The attribute ATTRIBUTESFILE in PKCS11CryptoToken can be set to a readable file but not an accepted file (i.e., recognized with attributes). In this case, an error is thrown which - together with the error - also prints the content of the file to the application server log. This gives a user that has both SignServer admin access and access to read the output of the server log (i.e., if remote syslog shipping is configured), the possibility to read the content of files accessible by the local user JBoss. |
| CVE-2026-25827 | An issue was discovered in Keyfactor SignServer before 7.6.0. A number of properties were identified to not have any restrictions to what path they can be set to by an admin user. Setting these properties to specific file paths can reveal information to the client side. Three specific properties were identified: The property ATTRIBUTESFILE in PKCS11CryotoToken can be set to a readable but not an accepted (i.e., recognized with attributes) file. In this case an error is thrown, confirming the existence of the file. The property KEYSTOREPATH in KeyStoreCryptoToken can be set to a non-existing file that will return an error confirming to the client side that the file does not exist. The property TRUSTSTOREPATH in RenewalWorker can be set to any path (without any restrictions) by an admin user. In the case that the provided path points to an existing file, readable by the user running the application server, but is not a recognized PEM format, it returns this as an error to the client side, confirming the existences of the file. |
| CVE-2026-32599 | Netmaker makes networks with WireGuard. Prior to version 1.5.0, the `sqliteDeleteRecord` function in Netmaker's database layer constructs SQL `DELETE` statements using direct string concatenation of user-supplied input. This allows an authenticated attacker to perform boolean-based SQL injection. Version 1.5.0 fixes the issue. |
| CVE-2026-39038 | BharatMLStack up to and including v1.3.0 is vulnerable to Cross Site Scripting (XSS) in the component Trufflebox UI (trufflebox-ui) in GenericNumerixTable.jsx. |
| CVE-2026-39039 | In BharatMLStack up to and including v1.3.0, Trufflebox UI stores the JWT authentication token, full user object, and session ID in the browser's localStorage, which is fully accessible to any JavaScript running on the page. |
| CVE-2026-44793 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, certain federation endpoints in a non-default clustered configuration inconsistently encode user-supplied parameters rendered into HTML in the SAML2 cluster cookie-hash redirect path. An unauthenticated attacker can induce a user to follow a crafted request and execute script in the OpenAM origin. This issue is fixed in version 16.1.1. |
| CVE-2026-45579 | DIRAC is an interware, meaning a software framework for distributed computing. Prior to versions 8.0.79, 9.0.22, and 9.1.10, the RequestManagementSystem/Service/ReqManagerHandler.py export_getRequestCountersWeb function passes an authenticated caller-controlled groupingAttribute to RequestManagementSystem/DB/RequestDB.py getRequestCountersWeb. An unrecognized value is resolved against the Request object and evaluated as Python code, allowing a crafted dunder attribute expression to reach operating-system functions and execute commands as the account running the DIRAC services. Successful exploitation can expose dirac.cfg, database passwords, stored proxies, and tokens, fully compromise the DIRAC system, and allow alteration of local log evidence. This issue is fixed in versions 8.0.79, 9.0.22, and 9.1.10. |
| CVE-2026-45794 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, the anonymous Push Notification SNS callback handled by SnsMessageResource falls back to a CTS predicate blob after a messageId expires from the in-memory dispatcher, treats top-level blob keys as Java class names for Class.forName, and deserializes attacker-controlled JSON through Jackson. A low-privileged user who starts Push Registration and obtains the messageId, shared secret, and challenge can wait for expiry, replace the persistent blob through anonymous callbacks, and trigger class loading and construction in the OpenAM JVM. The primitive can cause classpath-dependent process execution, file writes, or denial of service, although command execution was not confirmed on the tested stock classpath. This issue is fixed in version 16.1.1. |
| CVE-2026-46495 | OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.1, the JMX RMI connector in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiConnector.java processes attacker-controlled credential objects before authentication without a restrictive jmx.remote.rmi.server.credentials.filter.pattern, and RmiAuthenticator.authenticate in opendj-server-legacy/src/main/java/org/opends/server/protocols/jmx/RmiAuthenticator.java accepts an unconstrained Object array rather than a two-element String[]. When the JMX Connection Handler is enabled and its TCP listener is reachable, an unauthenticated remote attacker can submit a crafted serialized Java object and achieve code execution in the OpenDJ server process. The handler is disabled by default, and successful exploitation depends on the runtime classpath and Java version; remote code execution was demonstrated against OpenDJ 4.4.15 on JDK 11 with Jackson 2.12.6.1. This issue is fixed in 5.1.1. |
| CVE-2026-46498 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, OAuthTokenStore reads caller-supplied token identifiers from the shared Core Token Store (CTS) without an OAuth-only namespace, and OAuthAdapter accepts a row whose BLOB claims to contain an OAuth token without binding the trusted CTS type or verifying integrity. An attacker who can place controlled JSON in CTS under a known token identifier, such as through Push Registration followed by an anonymous SNS callback in an enabled realm, can mint OAuth bearer tokens and OpenID Connect ID tokens with chosen subject, client, realm, and scope. The flaw does not by itself create an OpenAM SSO session or grant console access. This issue is fixed in version 16.1.1. |
| CVE-2026-46619 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, MSISDNValidation in the MSISDN authentication module concatenates the request-supplied MSISDN value into an LDAP search filter without escaping, while the default empty trusted-gateway list allows all traffic. In a realm where an MSISDN module is enabled in a reachable authentication chain, an unauthenticated remote attacker can inject LDAP filter metacharacters, select an arbitrary matching user, and obtain a normal authenticated OpenAM session without a password. This issue is fixed in version 16.1.1. |
| CVE-2026-46623 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, the OAuth2 authentication module updates an existing local account with profile attributes that can include userPassword and inetUserStatus, rewriting the password to the username and reactivating disabled accounts. The missing OAuth.removeRestrictedAccountUpdateAttributes filtering permits these credential and status fields to reach the account update. With account creation enabled, repeated OAuth login causes the default ldapService chain to accept the username as both identifier and password, allowing an unauthenticated attacker to take over the local account without interacting with the identity provider. The rewrite can be denied for usernames shorter than the configured minimum password length. This issue is fixed in version 16.1.1. |
| CVE-2026-48717 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.1, AuthorizationCodeGrantTypeHandler requires a code_verifier only when the realm-wide codeVerifierEnforced setting is enabled, even when an authorization code stores a code_challenge. Because that setting is disabled by default, an attacker who intercepts a PKCE-protected authorization code can omit code_verifier and redeem the code, while an explicitly incorrect verifier is rejected. Public clients are directly affected, and confidential-client exploitation additionally requires client authentication material or another redemption context. This issue is fixed in version 16.1.1. |
| CVE-2026-48722 | Nextflow is a DSL for data-driven computational pipelines. From 25.09.2-edge until 25.10.6 and 26.04.3, nextflow auth login writes Seqera Platform OIDC bearer tokens to ${NXF_HOME:-~/.nextflow}/seqera-auth.config through AuthCommandImpl.writeConfig in plugins/nf-tower/src/main/io/seqera/tower/plugin/auth/AuthCommandImpl.groovy without setting restrictive file permissions, allowing the default umask 022 to create the file with mode 0644. On a multi-user POSIX host, a local user who can traverse the victim's home directory can read seqera-auth.config and impersonate the victim against Seqera Platform within the token's scope. Single-user systems and headless CI runners that do not use the interactive login flow are not affected. This issue is fixed in 25.10.6 and 26.04.3. |
| CVE-2026-48987 | pyLoad is a free and open-source download manager written in Python. Prior to 0.5.0b3.dev101, EventManager in src/pyload/core/managers/event_manager.py appends a Client object to the clients list for each unique uuid submitted to the authenticated getEvents API endpoint, but get_events does not invoke the available clean method to remove inactive clients. An authenticated user can repeatedly submit unique UUID values, causing retained client objects and process memory to grow without bound even after requests stop. The resulting memory exhaustion can trigger an operating-system out-of-memory termination of pyLoad or host-wide instability and denial of service. This issue is fixed in version 0.5.0b3.dev101. |
| CVE-2026-51133 | Cross Site Scripting vulnerability in za-internet GmbH C-MOR Video Surveillance <= V6.0104 allows a remote attacker to execute arbitrary code via the size parameter in ptzpreset.pml component and the showmovies.pml component |
| CVE-2026-51134 | The C-MOR Video Surveillance web interface (up to version 6.0104) is vulnerable to Path Traversal via the 'cam' parameter in show-movies.pml. |
| CVE-2026-52819 | Kimai is an open-source time tracking application. Prior to 2.57.0, the GET /api/timesheets list endpoint accepts user and users[] target identifiers from a caller with view_other_timesheet but does not apply access_user or verify that a ROLE_TEAMLEAD requester leads a team containing each target user. TimesheetController::cgetAction() adds the resolved users directly to the query while project and customer filtering still permits records on unscoped projects or projects sharing ordinary team membership, allowing a teamlead to retrieve another user's descriptions, timing data, tags, rate, and internalRate even though GET /api/timesheets/{id} would deny access through TimesheetVoter. This issue is fixed in version 2.57.0. |
| CVE-2026-52820 | Kimai is an open-source time tracking application. Prior to 2.57.0, PATCH /api/timesheets/{id} and POST /api/timesheets accept a user-controlled project identifier through TimesheetApiEditForm and FormTrait, and ProjectRepository::getQueryBuilderForFormType() places that identifier in an unconditional OR branch that bypasses the team access criteria. Any authenticated user with edit_own_timesheet can therefore assign an owned timesheet to a project outside the user's teams, persist unauthorized project attribution, and retrieve project and customer metadata through GET /api/timesheets/{id}?full=true. TimesheetTeamAccessValidator now checks changed project and activity associations against current team access. This issue is fixed in version 2.57.0. |
| CVE-2026-52821 | Kimai is an open-source time tracking application. Prior to 2.57.0, GET or POST requests to /en/admin/activity/create/{project} and /en/admin/project/create/{customer} require only the generic create_activity or create_project capability and do not verify edit access to the supplied Project or Customer object. A user who knows a valid project.id or customer identifier can use the preset-parent creation logic in src/Controller/ActivityController.php or src/Controller/ProjectController.php to persist a new child business object under an unauthorized parent, polluting project or customer configuration and influencing later time-entry, rate, reporting, and billing behavior. This issue is fixed in version 2.57.0. |
| CVE-2026-52822 | Kimai is an open-source time tracking application. Prior to 2.58.0, PATCH /api/timesheets/{id}/restart, PATCH /api/timesheets/{id}/duplicate, and the web duplicate workflow can derive a new record from an owned historical timesheet after the user's access to its project or activity has been revoked. TimesheetVoter evaluates the own-timesheet permission before current team access, and its canStart() logic validates object visibility but does not verify the user's current team access to the referenced project and activity. An old entry therefore acts as a persistent capability to create new time records under an unauthorized project and activity, corrupting budgets, statistics, reports, and invoices after an administrative revocation. This issue is fixed in version 2.58.0. |
| CVE-2026-52823 | Kimai is an open-source time tracking application. Prior to 2.58.0, TimesheetController exposes GET /api/timesheets/{id}/stop and GET /api/timesheets/{id}/restart, which reuse an authenticated browser session and perform state-changing operations through GET requests without a request-forgery defense. A remote attacker can cause a logged-in user to request either route from attacker-controlled content, stopping a running timesheet or restarting a historical entry to create and start a new timesheet without the user's consent. The unauthorized changes can corrupt time records, billing, reports, approvals, and audits. This issue is fixed in version 2.58.0. |
| CVE-2026-52824 | Kimai is an open-source time tracking application. Prior to 2.58.0, the official Docker image sets APP_SECRET to the public value change_this_to_something_unique in Dockerfile, and .docker/entrypoint.sh neither replaces nor rejects that value before Symfony uses it as kernel.secret. An unauthenticated attacker who reaches a deployment that did not override APP_SECRET, knows a username, correctly guesses the account ID associated with that username, and targets an account without active two-factor authentication can forge HMAC-protected authentication artifacts, including KIMAI_REMEMBER cookies and login links, to access the account without its password. The updated entrypoint generates and persists a random secret when no safe operator-provided value exists. This issue is fixed in version 2.58.0. |
| CVE-2026-52825 | Kimai is an open-source time tracking application. Prior to 2.58.0, POST /api/teams/{id}/members/{userId} and POST /api/teams/{id}/activities/{activityId} verify that a teamlead may edit the Team but do not verify access_user for the referenced User or view access for the referenced Activity. A teamlead can add users or activities outside the teamlead's manageable scope to an editable team, bypassing the narrower choices enforced by TeamEditForm and UserRepository::getQueryBuilderForFormType(). The resulting relationships can be trusted by RolePermissionManager::checkTeamAccessActivity() and other team-based authorization, visibility, reporting, and workflow logic. This issue is fixed in version 2.58.0. |
| CVE-2026-52826 | Kimai is an open-source time tracking application. Prior to 2.57.0, GET or POST requests to /en/admin/project/{id}/rate/{rate}, /en/admin/customer/{id}/rate/{rate}, and /en/admin/activity/{id}/rate/{rate} independently resolve the authorized parent identifier and the attacker-selected child rate identifier without confirming that the ProjectRate, CustomerRate, or ActivityRate belongs to that parent. An authenticated user who can edit one parent object can pair it with a rate record from an unauthorized project, customer, or activity and persist changes to billing configuration in kimai2_projects_rates, kimai2_customers_rates, or kimai2_activities_rates. This issue is fixed in version 2.57.0. |
| CVE-2026-52827 | Kimai is an open-source time tracking application. Prior to 2.59.0, the KIMAI_SESSION cookie issued after password verification but before TOTP completion is accepted by every /api route because config/packages/security.yaml protects the API with IS_AUTHENTICATED and App\API\Authentication\ApiRequestMatcher routes an existing session through the main firewall. A Scheb TwoFactorToken satisfies that access rule, and App\Voter\ApiVoter grants API access to its User, allowing an attacker with a valid account password to use authenticated REST API operations without entering the second factor even though web routes remain blocked. This issue is fixed in version 2.59.0. |
| CVE-2026-52828 | Kimai is an open-source time tracking application. Prior to 2.58.0, ExportController::createExportTemplate() and ExportController::editExportTemplate() inherit only the class-level create_export permission, which ROLE_TEAMLEAD receives by default, and omit the create_export_template permission required by the API routes and user interface. A teamlead can directly access the export template creation and editing web routes to create or modify global ExportTemplate records marked available to all users, altering export columns, renderer, format, and output used by other users and administrators. This issue is fixed in version 2.58.0. |
| CVE-2026-53459 | Bambuddy is a self-hosted print archive and management system for Bambu Lab 3D printers. Starting in version 0.1.6 and prior to version 0.2.4.4, a fail-open in the authentication code allows any attacker to bypass authentication by flooding a public endpoint to exhaust resources causing database access to fail, granting unauthenticated access to all protected endpoints. Version 0.2.4.4 patches the issue. |
| CVE-2026-53658 | Fabric CA is a Certificate Authority for Hyperledger Fabric. Prior to 1.5.21, when fabric-ca is configured with an LDAP backend, Client.GetUser in lib/server/ldap/client.go inserts the username from HTTP Basic authentication into the LDAP uid search UserFilter without escaping LDAP metacharacters. An unauthenticated attacker with network access to the CA enrollment endpoint can alter the LDAP search before password validation and potentially steer authentication attempts toward a victim account. Deployments that do not use an LDAP backend are unaffected. This issue is fixed in version 1.5.21. |
| CVE-2026-53954 | Bugsink is a self-hosted error tracking tool. Prior to version 2.2.2, Bugsink stores every set of custom tags supplied with an incoming event, allowing a caller with a valid project DSN to submit an unusually large tag set and force excessive tag-row writes. Because Bugsink uses a single-writer database architecture, the expensive write transaction delays digestion of other events and causes a temporary ingestion denial of service. Version 2.2.2 applies the configurable MAX_EVENT_TAGS limit before storage. The impact is limited to availability for an instance accepting the event and does not expose stored data, modify existing events, or allow code execution. This issue is fixed in version 2.2.2. |
| CVE-2026-54050 | Sakai is a Collaboration and Learning Environment (CLE). From 23.0 until 23.5 and 25.3, the DELETE /api/users/{userId}/profile/image endpoint allows an authenticated user to delete another user's profile image because ProfileController.removeProfileImage() passes the attacker-controlled userId to ProfileServiceImpl.removeProfileImage() without verifying ownership, and profileImageUploadedRepository.deleteById(userId) removes the selected row. The related DELETE /api/users/{userId}/profile/pronunciation endpoint also omits session validation and ownership checks before ProfileServiceImpl.removePronunciationRecording() deletes the target user's recording. The upload path is not affected because it already verifies ownership, and superusers remain intentionally authorized to modify other profiles. Successful exploitation can repeatedly remove profile identity artifacts, including administrator and instructor images, and disrupt workflows that rely on those artifacts. This issue is fixed in versions 23.5, 25.3, and 26.0. |
| CVE-2026-54076 | ArcadeDB is a Multi-Model DBMS. Prior to 26.6.1, the fix for CVE-2026-44221 added an UPDATE_SCHEMA authorization check only to LocalDocumentType.createProperty, while the remaining public schema mutators in engine/src/main/java/com/arcadedb/schema/LocalDocumentType.java and engine/src/main/java/com/arcadedb/schema/LocalProperty.java remained unchecked. An authenticated identity, including a read-only API token without UPDATE_SCHEMA permission, can use DROP PROPERTY, ALTER TYPE, or ALTER PROPERTY through the database command/query HTTP endpoints to rename types, change inheritance, alter aliases or buckets, drop properties, and change property constraints. The issue does not directly disclose or write record data, but unauthorized schema mutation can corrupt the meaning of stored records and breach the documented permission model. This issue is fixed in version 26.6.1. |
| CVE-2026-54077 | ArcadeDB is a Multi-Model DBMS. Prior to 26.6.1, the IMPORT DATABASE statement in engine/src/main/java/com/arcadedb/query/sql/parser/ImportDatabaseStatement.java did not require administrative privileges and passed its source to integration/src/main/java/com/arcadedb/integration/importer/SourceDiscovery.java without validation. An authenticated user with SQL command access through /api/v1/command or /api/v1/query can supply HTTP or HTTPS destinations to make server-side requests to internal services, or file:// paths to read files accessible to the server process and ingest the results as queryable records. The XML importer also permits DTD processing and external entities, enabling entity expansion. The root-only /api/v1/server administration endpoint is not affected. The fix requires updateSecurity permission, blocks local-network import destinations by default through arcadedb.server.security.importBlockLocalNetworks, supports the arcadedb.server.security.importAllowedLocalPaths file allow-list, and disables XML DTD processing and external entities. This issue is fixed in version 26.6.1. |
| CVE-2026-54251 | netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, the OHTTP gateway decryption path in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java allocates a pooled direct ByteBuf for decrypted plaintext before the AEAD tag is verified. When an invalid tag causes decryptChunk() to throw CryptoException, OHttpRequestResponseContext.decodeChunk() does not release the ByteBuf because the allocation is not guarded by try/finally. Repeated invalid encrypted requests can therefore leak native off-heap memory until the gateway is unable to continue serving requests. This issue is fixed in version 0.0.23.Final. |
| CVE-2026-54254 | Cyberdrop-DL is a bulk asynchronous downloader for multiple file hosts. From 8.5.0 until 9.14.0, the Pixeldrain crawler uses substring host matching instead of requiring the input host to be an exact member of SUPPORTED_DOMAINS, and then reuses that input host for API requests. When a Pixeldrain API key is configured, processing a crafted URL from an attacker-controlled lookalike host causes cyberdrop_dl/crawlers/pixeldrain.py to send the Authorization header to that host. The URL may be introduced through a third-party site that can cause downloads for other sites, and the attacker receives the user's Pixeldrain API key. This issue is fixed in version 9.14.0. |
| CVE-2026-54337 | Fireshare facilitates self-hosted media and link sharing. Prior to version 1.6.14, an argument Injection in the video upload function allows unauthenticated attacker to write/overwrite system files. Version 1.6.14 fixes the issue. |
| CVE-2026-54544 | Fireshare facilitates self-hosted media and link sharing. Prior to version 1.6.16, two API endpoints that trigger outbound HTTP requests are missing the @login_required decorator. An unauthenticated attacker can call POST /api/test-discord-webhook or POST /api/test-webhook and cause the Fireshare server to issue an arbitrary HTTP POST to any URL the attacker supplies, including internal network addresses and cloud metadata services. No credentials, session cookies, or prior access are required. Version 1.6.16 contains a patch. |
| CVE-2026-54547 | Meta Ads MCP is a Model Context Protocol (MCP) server that lets AI assistants run Meta Ads. Prior to version 1.0.115, AuthInjectionMiddleware in meta_ads_mcp/core/http_auth_integration.py rejects HTTP MCP requests only when both auth_token and pipeboard_token are absent, while extract_token_from_headers() does not recognize X-Pipeboard-Token as a primary credential. A network caller using the streamable-http transport can therefore send any X-Pipeboard-Token value, pass the guard without establishing authentication context, and cause get_auth_token() to fall back to the server operator's META_ACCESS_TOKEN. Subsequent MCP tools execute with the operator's Meta credentials and can read or modify the operator's Meta Ads data. Deployments using the default stdio transport or without META_ACCESS_TOKEN are not affected. This issue is fixed in version 1.0.115. |
| CVE-2026-54549 | Meta Ads MCP is a Model Context Protocol (MCP) server that lets AI assistants run Meta Ads. Prior to version 1.0.115, the upload_ad_image tool in meta_ads_mcp/core/ads.py passes an attacker-controlled image_url to try_multiple_download_methods() in meta_ads_mcp/core/utils.py, where httpx.AsyncClient uses follow_redirects=True and performs HTTP requests without validating the scheme, host, or resolved IP address. In a streamable-http deployment, a network caller can use any non-empty authorization value because Meta credential validation occurs after the image download, then direct the server to loopback services, private-network addresses, cloud metadata endpoints, or redirect-chained internal targets. The resulting server-side request forgery can expose internal data, invoke state-changing internal services, or disrupt reachable services. This issue is fixed in version 1.0.115. |
| CVE-2026-54561 | MCP Memory Keeper is an MCP server for persistent context management in AI coding assistants. Prior to 0.13.0, context_import in src/index.ts passes the caller-controlled filePath directly to fs.readFileSync without restricting the path to an export directory. An MCP client, including an LLM agent induced to call the tool, can use ../ traversal or an absolute path to target any file readable by the server process. A valid JSON file is parsed and imported into the caller's session, allowing its full contents to be retrieved through context_get or context_export, while JSON.parse errors for non-JSON files can return leading file bytes in a SyntaxError message. The two disclosure modes can expose other exported sessions, JSON credentials or service-account files, environment files, and portions of SSH keys or other local files. This issue is fixed in version 0.13.0. |
| CVE-2026-55178 | GeoLens is a self-hosted geospatial data catalog with semantic search, OGC and STAC APIs, and a map builder. Prior to 1.2.3, multiple read and link endpoints authorize only the resource named in the request URL and fail to re-authorize a second caller-influenced dataset reached through a relationship, map layer, VRT source, externalId lookup, or request body. When a public map references a private dataset, anonymous callers can use GET /maps/{id} and GET /maps/{id}/style.json to obtain the private layer's metadata, sampled values, or vector tiles. The style response can expose a replayable HMAC tile URL that is bound to neither a user nor a map. When a public source dataset has a relationship to a private target dataset, anonymous callers can use the dataset relationship APIs to enumerate the relationship and read rows from the private target's backing table. Anonymous callers can also use GET /collections/datasets/items with an externalId dataset UUID to obtain metadata for any private, restricted, or unpublished dataset because that lookup performs no visibility check. Authenticated users with the default editor role can mosaic another user's private raster into an owned VRT and read its pixels, and POST /ai/metadata/{summary,keywords,lineage,quality-statement} accepts a body-controlled dataset_id without a visibility check and returns private metadata and sample values. Pre-existing vrt_source_links also expose unauthorized member metadata and health unless each member is filtered at read time. These paths can disclose vector geometries and attributes, raster pixels, table rows, table names, column schemas, feature counts, extents, source URLs and filenames, contacts, and sampled row values. This issue is fixed in version 1.2.3. |
| CVE-2026-55211 | Surfio is a library for reading and writing surface files. Prior to 0.0.19, surfio does not correctly validate size fields in IRAP files, leading to a buffer overflow when untrusted files are parsed. The severity assumes surfio is used to parse untrusted files in a networking context such as a web service. This issue is fixed in version 0.0.19. |
| CVE-2026-55317 | In printf of printf.c, there is a possible out-of-bounds write due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-55318 | In multiple locations, there is a possible use-after-free due to a race condition. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-55343 | In decodeAmr of ImsMediaAudioPlayer.cpp, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation. |
| CVE-2026-55617 | Hydro is a next-generation high-performance online judge platform. From 4.10.4 until 5.0.2, the session recreation logic in packages/hydrooj/src/service/layers/base.ts creates a replacement session token without deleting the previous token from the server-side session token store, so an old sid cookie can remain valid after logout or another renewal flow. An attacker who possesses a victim's previously valid stale cookie can replay it over HTTP or HTTPS without knowing the victim's username or password and without victim interaction at exploitation time. Successful replay can take over the victim's account, disclose private data, and permit unauthorized modification or deletion of data available to that account. This issue is fixed in version 5.0.2. |
| CVE-2026-55650 | Outerbase Studio is a lightweight browser-based database GUI supporting PostgreSQL, MySQL, and SQLite. In version 0.10.2 and earlier, TextComponent in src/components/chart/index.tsx renders unsanitized Text Widget content through dangerouslySetInnerHTML, allowing injected markup with script-capable event handlers to execute when the widget is displayed. Outerbase Cloud and its backend services were discontinued in 2025, and the current architecture uses local browser dashboard storage, so the impact is limited to local self-XSS. Authentication token theft, account takeover, and backend database access are not applicable to the current architecture. No fixed release is available as of this review. |
| CVE-2026-55828 | qbee transport is a remote access transport protocol implementation. Prior to 1.26.25, the extractTar routine uses strictly lexical path validation that does not account for on-disk symlinks created earlier in the extraction process. A crafted tar archive can use a symlink chain to write or overwrite files one directory level above the intended extraction path. When qbee-agent performs the extraction with root privileges, this permits a root-privileged file write outside the intended destination. This issue is fixed in version 1.26.25. |
| CVE-2026-56879 | In gmc_mb_msg_handler of gmc_mba.c, there is a possible memory corruption due to a confused deputy. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56881 | In enable_segment of remap.c, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56888 | In multiple locations, there is a possible permission bypass due to side channel information disclosure. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56889 | In multiple locations, there is a possible permission bypass due to an integer overflow. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56892 | In ReadDataElement of common.c, there is a possible information disclosure due to an incorrect bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56907 | In VPU, there is a possible shared memory overwrite due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56914 | In multiple locations, there is a possible use-after-free due to improper locking. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56915 | In bigo_worker_thread of bigo.c, there is a possible escalation of privilege due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56920 | In s_decode_vui_param of fw_hevc_dec_header.c, there is a possible out-of-bounds write due to a logic error in the code. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56922 | In CPM, there is a possible permission bypass due to a confused deputy. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56923 | In handle_unmap_req of tipc_virtio_dev.c, there is a possible memory corruption due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56932 | In Trusted Execution Environment, there is a possible memory corruption due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56941 | In multiple functions of fpc_tee_hal.c, there is a possible use-after-free due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56942 | In ReadTileInfo of vp9hwd_headers.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56945 | In VPU, there is a possible out-of-bounds write due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56950 | In validate_ns_buf of mbu_class.rs, there is a possible information disclosure due to improper input validation. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56958 | In gf_algo_get_cached_dump_data of gf_algo.c, there is a possible out-of-bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56960 | In multiple locations, there is a possible use-after-free due to a logic error in the code. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56964 | In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56970 | In multiple locations, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56972 | In multiple locations, there is a possible out-of-bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56973 | In multiple locations, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56974 | In Start of AudioRtpPayloadEncoderNode.cpp, there is a possible out-of-bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation. |
| CVE-2026-56978 | In get_global_config_item_addr of gc.c, there is a possible out-of-bounds read due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56979 | In multiple locations, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56982 | In VPU, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56985 | In multiple files, there is a possible way to obtain signatures due to type confusion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56986 | In multiple files, there is a possible out-of-bounds read due to type confusion. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56989 | In multiple locations, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56992 | In multiple files, there is a possible permission bypass due to a confused deputy. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-56997 | In Av1DecodeFrameTag of vp9hwd_headers.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-57006 | In acfw_ffa.c, there is a possible secret read due to a logic error in the code. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-57012 | In the Setup Wizard, there is a possible remote package install due to a missing permission check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-57014 | In phNxpNciHal_ext_process_nfc_init_rsp of phNxpNciHal_ext.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-57035 | In multiple locations, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-57112 | PraisonAI is a multi-agent teams system. From praisonaiagents 0.6.0 until 1.6.59 and PraisonAI 3.10.0 until 4.6.59, ToolsMCPServer.run_sse() in src/praisonai-agents/praisonaiagents/mcp/mcp_server.py mounts SseServerTransport on the legacy /sse and /messages/ endpoints without default Host, Origin, or authentication enforcement. A malicious website can use DNS rebinding against a reachable local or internal SSE server, supply attacker-controlled Host and Origin headers, enumerate registered tools, and invoke them with the server user's privileges. The Streamable HTTP transport rejects the same hostile Origin, which isolates the flaw to the legacy SSE wrapper. An initial remediation was released in praisonaiagents 1.6.59 and PraisonAI 4.6.59. |
| CVE-2026-57140 | PraisonAI is a multi-agent teams system. From 1.6.0 until 1.7.2, AgentOS in src/praisonai-ts/src/os/agentos.ts uses the 0.0.0.0 default from src/praisonai-ts/src/os/config.ts and registers GET /api/agents and POST /api/chat without authentication middleware. A remote caller who can reach the service can obtain agent names, roles, and instruction prefixes and can invoke a selected agent, potentially reaching its tools, memory, external APIs, credentials, and workflow state. An initial remediation was released in version 1.7.2. |
| CVE-2026-57141 | PraisonAI is a multi-agent teams system. Prior to 1.7.2, the codeMode tool in src/praisonai-ts/src/tools/builtins/code-mode.ts executes model-generated JavaScript with new Function() and with(sandbox), while a regular-expression blocklist can be bypassed with Function('return this')() to recover the global object and by constructing the child_process module name dynamically. An attacker who can influence the code argument can access host process capabilities, read or write files, obtain environment credentials, and execute operating-system commands with the PraisonAI process privileges. This issue is fixed in version 1.7.2. |
| CVE-2026-57147 | PraisonAI is a multi-agent teams system. Prior to 0.1.6, praisonai_platform/services/auth_service.py assigns the public dev-secret-change-me value to JWT_SECRET when PLATFORM_JWT_SECRET is unset, and its production guard does not run when PLATFORM_ENV is also unset because that setting defaults to dev. A remote unauthenticated attacker can mint an HS256 token with an arbitrary sub and email, and the platform's AuthService._verify_token() and get_current_user dependency accept the forged identity for protected API routes. This vulnerability is fixed in praisonai-platform 0.1.6. |
| CVE-2026-57148 | PraisonAI is a multi-agent teams system. Prior to 0.1.6, praisonai_platform/services/auth_service.py falls back to the public dev-secret-change-me HS256 signing key when PLATFORM_JWT_SECRET is unset, while the startup and token-issuance guards are disabled because PLATFORM_ENV also defaults to dev. An unauthenticated attacker can sign a JWT containing an attacker-chosen sub value, and AuthService._verify_token() accepts it as an authenticated identity, enabling user or workspace-owner impersonation when a target identifier is known. This vulnerability is fixed in praisonai-platform 0.1.6. |
| CVE-2026-57441 | MCPVault is a lightweight Model Context Protocol server for safe access to files in an Obsidian vault. Prior to 0.11.4, PathFilter in src/pathfilter.ts compiles restricted-directory patterns case-sensitively and compares paths without canonicalizing filesystem-equivalent segment names. On case-insensitive macOS and Windows filesystems, case variants of .git, .obsidian, or node_modules pass both isAllowed() and isAllowedForListing() even though the operating system opens the restricted directory, and Windows trailing dots or spaces provide the same bypass. An attacker who influences a path selected by an AI agent can use the bypass in read, write, move, search, or listing operations to expose or modify sensitive repository and Obsidian metadata. Vault-root .. containment is not affected. This issue is fixed in version 0.11.4. |
| CVE-2026-57442 | MCPVault is a lightweight Model Context Protocol server for safe access to files in an Obsidian vault. Prior to 0.11.5, PathFilter in src/pathfilter.ts uses root-anchored deny-list patterns, so nested .git, .obsidian, and node_modules path segments do not match the restriction and pass both isAllowed() and isAllowedForListing(). An attacker who influences a path selected by an AI agent can traverse nested repository or Obsidian metadata, read remote URLs or embedded tokens, or cause nested node_modules content to pollute the listAllTags index. This issue is fixed in version 0.11.5. |
| CVE-2026-58196 | ToolHive is a utility designed to simplify the deployment and management of Model Context Protocol (MCP) servers. Prior to 0.31.0, remote.Handler.Authenticate in pkg/auth/remote/handler.go invokes discovery.DetectAuthenticationFromServer in pkg/auth/discovery/discovery.go, whose host-side HTTP clients trust remote-server-controlled authentication discovery destinations, follow redirects without host or scheme restrictions, and do not consistently block private addresses. A malicious or compromised remote MCP server can place a resource_metadata URL in WWW-Authenticate for ParseWWWAuthenticate to extract, after which FetchResourceMetadata, OIDC issuer discovery, and well-known discovery can issue GET requests to link-local, RFC1918, or other internal services outside the server's container. The user connects to a server that the user intends to use, but the server controls the internal destination; this path does not depend on the separate NAT64 guard omission because the affected clients did not invoke IsPrivateIP, and it differs from the DCR resolver path that already refused redirects. The demonstrated primitive reaches internal-only HTTP services and reachability or error oracles, and can retrieve AWS metadata credentials where IMDSv1 accepts an unauthenticated GET, while IMDSv2 and GCP metadata prerequisites are not satisfied by the demonstrated request. This vulnerability is fixed in 0.31.0. |
| CVE-2026-58200 | Payload Plugins is a collection of plugins designed to enhance Payload CMS. From 0.3.0 until 0.4.0, @jhb.software/payload-cloudinary-plugin deployments with clientUploads enabled expose POST /api/cloudinary-generate-signature, whose handler in cloudinary/src/getGenerateSignature.ts passes attacker-controlled body.paramsToSign directly to cloudinary.utils.api_sign_request without a key allowlist, collection policy, timestamp freshness check, or configured-folder enforcement. Any authenticated Payload user can obtain a valid Cloudinary HMAC-SHA1 signature for unauthorized parameters such as overwrite, type, notification_url, invalidate, folder, and public_id. The signature can authorize asset replacement, upload visibility changes, callbacks to attacker-selected URLs, cache invalidation, and uploads outside the intended folder. The client-visible Cloudinary API key is expected by the upload design, but the unrestricted server-side signature supplies the authorization value needed to complete these operations. This vulnerability is fixed in 0.4.0. |
| CVE-2026-58483 | mcp-searxng is a Model Context Protocol server that gives AI assistants web search and URL-reading capabilities through SearXNG. Prior to 1.7.1, web_url_read in src/index.ts passes a caller-supplied URL to readUrlContent() in src/url-reader.ts, where checkContentLength() treats a missing Content-Length header as an inconclusive preflight and the normal and error paths then consume the complete body with response.text(). A server that omits Content-Length can therefore bypass URL_READ_MAX_CONTENT_LENGTH_BYTES and force unbounded memory use. The resulting string is also processed by NodeHtmlMarkdown.translate(), increasing CPU consumption and allowing an unauthenticated HTTP client to cause denial of service. This issue is fixed in version 1.7.1. |
| CVE-2026-58485 | mcp-searxng is a Model Context Protocol server that gives AI assistants web search and URL-reading capabilities through SearXNG. Prior to 1.7.1, web_url_read receives its caller-controlled URL through src/index.ts and validates only the literal hostname in assertUrlAllowed() within src/url-reader.ts before undiciFetch() performs operating-system DNS resolution. A public-looking attacker-controlled hostname that resolves to a private, loopback, link-local, or cloud-metadata address therefore passes the lexical check and causes the MCP server to connect to the internal destination. In the default HTTP configuration, an unauthenticated network client can use this path to read internal services, expose credentials or service tokens, and enumerate reachable internal hosts; in STDIO deployments, prompt-influenced tool selection can provide the malicious URL. Direct private IP literals are blocked, and MCP_HTTP_ALLOW_PRIVATE_URLS remains an explicit opt-out. This issue is fixed in version 1.7.1. |
| CVE-2026-58502 | githubtoplanguages generates a user's top GitHub languages as an SVG. The .github/workflows/discord-issue.yml workflow runs when an issue is opened or closed and interpolates github.event.issue.title directly into the Bash assignment for ISSUE_TITLE before shell parsing. An issue title containing shell command-substitution syntax can therefore execute commands on the GitHub Actions runner before the title is included in the Discord notification sent through DISCORD_WEBHOOK. Successful exploitation can manipulate or spoof trusted bot notifications and may expose the Discord webhook secret or other workflow environment data, depending on repository permissions. This issue is fixed by commit 6bf9c3a9cb66c937b9047ca266b3d02f2bb11027. |
| CVE-2026-58678 | In Bootloader, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58679 | In gf_ta_test_set_config of gf_ta_test.c, there is a possible heap buffer overflow due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58683 | In IP Multimedia Subsystem, there is a possible out-of-bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58691 | In FsmReleaseKey of fsm.c, there is a possible permission bypass due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58695 | In gmc_phy_lp3_exit_restore_registers of phy_power.c, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58698 | In ap_pmic_poll_msg_handler of ap_pmic_ipc.c, there is a possible permission bypass due to a confused deputy. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58699 | In Vp9DecEndOfStream of vp9hwd_output.cc, there is a possible out-of-bounds read due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58701 | In trusty_dputc of generic-arm64-smcall.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58710 | In DecodeFilmGrainParams of film_grain_dec.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58716 | In multiple locations, there is a possible time-of-check to time-of-use due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58718 | In smmu_detach_dev_nested of arm-smmu-v3.c, there is a possible escalation of privilege due to improper input validation. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58721 | In multiple locations, there is a possible information disclosure due to uninitialized memory use. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58724 | In multiple locations, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58726 | In FsmReleaseKey of fsm.c, there is a possible permission bypass due to a missing permission check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58728 | In ARM64_TLBI of mmu.h, there is a possible memory corruption due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58731 | In multiple functions of physmem_extmem_linux.c, there is a possible out-of-bounds read due to uninitialized data. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58734 | In google_mba_recv_msg of google_mba_poll.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58739 | In platform_msg_handler_init of default_msg_handlers.c, there is a possible confused deputy due to a confused deputy. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58744 | In multiple locations, there is a possible escalation of privilege due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58747 | In smmu_detach_dev of arm-smmu-v3.c, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58751 | In multiple functions of arm-smmu-v3.c, there is a possible use-after-free due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58755 | In smmu_install_nested_ste of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58765 | In GPU, there is a possible permission bypass due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58766 | In multiple functions of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58767 | In multiple functions of arm-smmu-v3.c, there is a possible escalation of privilege due to a logic error in the code. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-58773 | In link_load_gnss_image of link_device.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| CVE-2026-59160 | Yeger is a monorepo for npm packages maintained under the yeger scope. Prior to 2.8.9, the turbo-graph package starts its embedded Next.js server from packages/turbo-graph/src/index.ts on all interfaces, including 0.0.0.0:29312 by default, while the GET handler for /api/run in packages/turbo-graph-ui/app/api/run/route.ts has no authentication, authorization, CSRF protection, or task allowlist. The handler accepts the tasks, filter, and force query parameters, and buildResponseFromArgs passes attacker-selected task names to spawn() as Turbo CLI arguments. An adjacent-network attacker can execute any task defined in the victim repository's turbo.json with the privileges of the developer OS user, potentially exposing secrets, modifying files or infrastructure, or causing destructive availability effects. The use of an argument array prevents traditional shell metacharacter injection but does not prevent unauthorized execution of defined tasks. This issue is fixed in version 2.8.9. |
| CVE-2026-59965 | Payload Plugins is a collection of plugins designed to enhance Payload CMS. In 0.7.0, @jhb.software/payload-alt-text-plugin exposes POST /api/alt-text-plugin/generate and POST /api/alt-text-plugin/bulk with a default guard that accepts any authenticated user, while alt-text/src/endpoints/generateAltText.ts and alt-text/src/endpoints/bulkGenerateAltTexts.ts call req.payload.findByID and req.payload.update without overrideAccess: false. Payload therefore defaults overrideAccess to true and skips the target collection's read and update access functions. An authenticated low-privilege user can supply id, collection, locale, and update values to read arbitrary protected upload documents and overwrite their alt and keywords fields, even when the collection permits those operations only to administrators. A control Local API call with overrideAccess: false is denied, confirming that the plugin endpoint bypasses otherwise effective collection rules. This vulnerability is fixed in 0.8.0. |
| CVE-2026-59971 | MySQL MCP Server is a Model Context Protocol server that enables secure interaction with MySQL databases. Prior to 0.4.2, setting MCP_TRANSPORT=sse causes src/mysql_mcp_server/server.py to construct SseServerTransport without security_settings or enable_dns_rebinding_protection, while the Starlette routes /, /sse, and /messages/ have no authentication and the service binds to 0.0.0.0 by default. A network attacker can directly reach execute_sql, or can use DNS rebinding to make a victim's browser relay same-origin requests to a locally bound service, and supply a query that reaches cursor.execute(query). This allows unauthenticated disclosure and modification of the configured database; when the MySQL account has FILE privileges, the same access can read or write server files and may enable code execution. The default stdio transport is not affected. This issue is fixed in 0.4.2. |
| CVE-2026-59973 | FrontMCP is a TypeScript-first framework for the Model Context Protocol (MCP). From mcp-from-openapi 2.3.0 until 2.5.0 and from frontmcp and @frontmcp/adapters 1.2.1 until 1.5.0, libs/adapters/src/openapi/openapi.adapter.ts loadOpenAPISpec() forwards untrusted OpenAPI url and spec inputs and loadOptions.refResolution to OpenAPIToolGenerator.fromURL() and OpenAPIToolGenerator.fromJSON(). The external $ref guard checks parsed hostname strings without resolving addresses, pinning validated addresses, revalidating redirect targets, or normalizing IPv4-mapped IPv6. An authenticated user who can import or configure an OpenAPI specification in a hosted or multi-user deployment can use DNS-to-loopback resolution, redirect-to-loopback behavior, or IPv4-mapped IPv6 loopback forms to cause backend-origin requests to internal services. This can expose internal administrative APIs, metadata-like services, and other private network endpoints. The practical impact is lower when only a trusted local administrator can configure OpenAPI specs, and disabling external reference protocols prevents the external $ref request. This issue is fixed in mcp-from-openapi 2.5.0 and frontmcp and @frontmcp/adapters 1.5.0. |
| CVE-2026-61544 | libp2p-rust is the official Rust language implementation of the libp2p networking stack. Prior to 0.13.1, libp2p-quic could panic during an inbound QUIC handshake when a remote peer presented a valid short-lived libp2p TLS certificate and delayed the final TLS 1.3 handshake fragment until after the certificate expired. In the Quinn post-handshake upgrade path, transports/quic/src/connection/connecting.rs called libp2p_tls::certificate::parse a second time in remote_peer_id and used expect on the result. The repeated wall-clock validity check could reject the now-expired certificate, causing the expect call to terminate any application exposing an affected libp2p-quic listener. This vulnerability is fixed in 0.13.1. |
| CVE-2026-61554 | emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 4.2.5, the `http_poll` C2 transport accepts attacker-controlled HTTP polling sessions before CBOR `MsgAuth` authentication is completed. A remote unauthenticated attacker can create arbitrary polling sessions and send request bodies that are forwarded into the C2 dispatch path. This can consume server resources and trigger pre-auth C2 processing. Version 4.2.5 patches the issue. |
| CVE-2026-61667 | DIRAC is an interware, meaning a software framework for distributed computing. Prior to versions 8.0.79, 9.0.22, and 9.1.10, DataManagementSystem/Service/FileCatalogHandler.py checkDataset forwards an authenticated caller-controlled datasets value to DatasetManager.py __checkDataset, where datasetName is interpolated into an FC_MetaDatasets SQL query without parameterization. The injected query can control the returned MetaQuery value, which is passed to Python eval and permits command execution as the account running the DIRAC services. Successful exploitation can expose dirac.cfg, database passwords, stored proxies, and tokens, fully compromise the DIRAC system, and allow alteration of local log evidence. This issue is fixed in versions 8.0.79, 9.0.22, and 9.1.10. |
| CVE-2026-62263 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.2, WebAuthnAuthentication.deserialize applies an ObjectInputFilter that allows every serialized object at depth greater than 1 and therefore constrains only an AuthenticatorImpl root object. A pre-authentication attacker can supply a userHandle whose serialized graph has a valid AuthenticatorImpl root and a nested gadget class, causing readObject or readResolve execution before the cast and assertion verification when a usable gadget is on the classpath. This bypasses the incomplete remediation for the earlier WebAuthn deserialization vulnerability. This issue is fixed in version 16.1.2. |
| CVE-2026-62280 | Open Access Management (OpenAM) is an access management solution. From 13.0.0 until 16.1.2, the OAuth2 authorize endpoint's display=wap consent page reflects request-derived values through ConsentRequiredResource and wap/authorize.ftl without HTML escaping. An attacker can induce a user with an active OpenAM session to follow a crafted authorization link and execute JavaScript in the OpenAM origin, enabling session or cookie theft, CSRF-token disclosure, and actions with the victim's privileges. At least one registered OAuth2 client is required, but the attacker does not need to control that client. This issue is fixed in version 16.1.2. |
| CVE-2026-62379 | Open Access Management (OpenAM) is an access management solution. Prior to 16.1.2, the pre-authentication /authservice PLL endpoint accepts a CustomCallback XML element whose className value selects an arbitrary Java class for AuthXMLUtils to load and instantiate without verifying that it implements DSAMECallbackInterface. Default configurations expose the endpoint without authentication, allowing attacker-controlled class initialization and unsafe deserialization of a serialized Subject value to execute code in the server process. Enabling sunRemoteAuthSecurityEnabled does not prevent the vulnerable parsing and instantiation because its check occurs later. This issue is fixed in version 16.1.2. |
| CVE-2026-62597 | Vulnerability in the Oracle Enterprise Manager Base Platform product of Oracle Enterprise Manager (component: Event Management). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows low privileged attacker with network access via SOAP to compromise Oracle Enterprise Manager Base Platform. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Enterprise Manager Base Platform accessible data. CVSS 3.1 Base Score 6.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N). |
| CVE-2026-63443 | Coder allows organizations to provision remote development environments via Terraform. Prior to 2.29.19, 2.32.9, 2.33.10, and 2.34.4, agentConn.apiClient() follows redirects while its custom transport accepts the host from the redirected request URL when the port is the workspace agent HTTP API port 4. An authenticated user who controls a modified workspace agent and knows another online agent's UUID can derive the victim's tailnet address and redirect control-plane requests to that agent. HTTP 301, 302, and 303 redirects can redirect read requests, while HTTP 307 and 308 preserve replayable write and process-start requests. The redirected workspace agent file APIs can read or write files as the victim workspace user, and affected versions exposing the workspace agent process API can execute commands after a redirected file write, crossing workspace and tenant boundaries. This issue is fixed in versions 2.29.19, 2.32.9, 2.33.10, and 2.34.4. |
| CVE-2026-66890 | The affected products use hard-coded credentials, which could allow remote access to files with root privileges where FTP is reachable. |
| CVE-2026-68950 | The affected products use hard-coded credentials, which could allow an attacker to run the ftpd service as root, providing remote root file access where FTP is reachable. |
| CVE-2026-68953 | The affected products are vulnerable to an authentication bypass that allows unauthenticated remote attackers to disclose sensitive device information, including administrator credentials in plaintext, by sending crafted HTTP(S) requests. |
| CVE-2026-69201 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, ResourceService and WebjarService decode each URL path segment but reject only segments exactly equal to an empty string, a dot, or two dots. A request containing percent-encoded slash or backslash separators can turn an accepted segment into a parent-directory traversal after decoding, allowing access to classpath or WebJar resources outside the configured base when a directory-backed classpath is served and the backend preserves the encoded separator. The patch rejects decoded segments containing slash or backslash in ResourceService and WebjarService, and applies the same guard to the non-exploitable FileService for consistency. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69202 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s HTTP/2 flow-control window is replenished according to bytes received from the network rather than bytes consumed by the application, while each stream stores DATA in an unbounded channel. A hostile peer can therefore send a body faster than a slow or non-draining application consumes it, retaining payloads in heap on an ember-server or ember-client configured with withHttp2. The patch bounds the per-stream H2Connection body channel so application consumption applies backpressure. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69203 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, An Ember server with HTTP/2 enabled through withHttp2 does not enforce SETTINGS_MAX_CONCURRENT_STREAMS for peer-created streams. One unauthenticated connection can open an unbounded number of streams, each retaining per-stream state until heap exhaustion. The same unchecked allocation is reachable in an ember-client through server-initiated PUSH_PROMISE frames because enablePush is not enforced. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69204 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember HTTP/1.1 does not reject messages containing both Transfer-Encoding and Content-Length, so an intermediary and Ember can select different body framing rules. When ember-server is behind a keep-alive intermediary that forwards both headers and frames by Content-Length, an unauthenticated attacker can smuggle a second request, bypass intermediary access controls, poison caches, or cause a victim request to be joined to an attacker-controlled prefix. The shared response parser can also desynchronize an ember-client connection when a malicious or compromised upstream sends both headers. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69205 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s HeaderP.parse uses a case-sensitive substring test for the Transfer-Encoding value and decodes header bytes with the platform default charset. Values such as Chunked are not recognized, values such as notchunked are incorrectly accepted, and Unicode case folding can turn a Kelvin-sign byte sequence into a match when UTF-8 is used. Intermediaries that apply RFC-compliant token and charset rules can therefore disagree with Ember’s Content-Length or zero-length framing, enabling TE.CL or TE.0 request smuggling, access-control bypass, cross-user request hijacking, and cache poisoning on the server path. Response smuggling through an ember-client gateway requires a malicious or compromised upstream. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69206 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, DigestAuth replay protection records lastNc plus one instead of the highest nonce-count value it has accepted. When a legitimate client sends noncontiguous nc values because of parallel or retried requests, the stored counter remains below the accepted maximum, allowing a passive observer to replay a captured Authorization header multiple times. Successful replays execute authenticated requests, including state-changing operations, as the captured user. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69208 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, the DigestAuth server middleware removes fresh nonces and stops eviction at the first stale nonce because its stale-nonce comparison is inverted. On an application that protects at least one route with DigestAuth, an unauthenticated attacker can repeatedly trigger authentication challenges, causing the persistent nonce map to grow until the JVM exhausts heap memory. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69209 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The shared WebSocket decoder permits unbounded message buffering because defragmentation accumulates fragments without a limit and FrameTranscoder accepts declared lengths up to Int.MaxValue. A remote client that completes a WebSocket handshake against an http4s-blaze-server or http4s-ember-server endpoint can exhaust server memory with oversized frames or fragmented messages. The patched decoder applies a configurable 64 MiB default limit to individual frames and defragmented messages through EmberServerBuilder.withMaxWebSocketMessageSize. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69210 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, WebSocket FrameTranscoder.bodyLength rejects extended payload lengths above Integer.MAX_VALUE but permits negative 64-bit lengths. A remote client that completes a WebSocket handshake through an Ember server can send such a frame, causing the decoder to return an empty frame without advancing its input. The decode loop then runs indefinitely, pins a worker at full CPU, and grows an ArrayBuffer without bound, resulting in denial of service. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69211 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, ResponseCookie.render writes attacker-influenced name, content, domain, path, and extension values without neutralizing semicolons or control characters. An application that constructs a ResponseCookie from unvalidated input can therefore emit injected cookie attributes such as Domain, Path, or SameSite, widening cookie scope or weakening protections, and control characters may enable header splitting on permissive backends. The patch strips control characters from all five fields and strips semicolons from name, content, domain, and path while retaining the extension delimiter behavior. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69212 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The FollowRedirect client middleware strips Authorization and Cookie headers only when a redirect changes authority, but authority comparison excludes the URI scheme. A same-authority redirect from HTTPS to HTTP therefore preserves credentials and transmits them over a plaintext connection. An attacker who can induce the downgrade and observe the network can capture those sensitive headers from applications using FollowRedirect. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69213 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember HTTP/2 serializes outbound frames through one unbounded queue consumed by writeLoop. When the peer stops reading, an unauthenticated HTTP/2 client can continue sending PING, SETTINGS, or DATA frames that cause Ember to enqueue acknowledgments or WINDOW_UPDATE frames faster than the writer drains them, exhausting heap memory on a server built with withHttp2. The shared behavior also affects an ember-client connected to a hostile HTTP/2 server, and the patch replaces the unbounded path with bounded, backpressured outbound queues. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69214 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The CookieJar client middleware stores a response cookie’s Domain attribute without checking that it domain-matches the host that supplied the cookie or rejecting public suffixes. A malicious or compromised server contacted through the same CookieJar can plant a cookie for another domain, and the jar later sends that cookie to the victim domain, enabling session fixation or overwriting security-sensitive cookies. The patch validates the Set-Cookie domain against the response origin, although public-suffix rejection remains unimplemented. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69215 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, The CookieJar client middleware uses unanchored substring checks instead of RFC 6265 domain and path matching when deciding whether to attach a stored cookie. A cookie for example.com can consequently be sent to an attacker-controlled hostname such as evilexample.com when an application using the same jar makes an attacker-influenced outbound request. This exposes session or authentication cookies and can enable hijacking of the application’s outbound sessions. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69216 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, Ember’s chunk decoder trims the chunk-size token and accepts leading plus or minus signs instead of requiring one or more hexadecimal digits followed by the required CRLF. When an intermediary forwards chunked data without re-encoding and interprets malformed chunk boundaries differently, an unauthenticated attacker can create TE.TE request smuggling that bypasses intermediary controls, poisons caches, or hijacks the request queue. The same response-path leniency can enable response smuggling against an ember-client used as a gateway when the upstream is malicious or compromised. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-69218 | Http4s is a Scala interface for HTTP services. Prior to 0.23.35 and 1.0.0-M47, When Ember receives an HTTP/2 HEADERS or PUSH_PROMISE frame without END_HEADERS, H2Connection buffers the header block and subsequent CONTINUATION fragments without a size bound. A remote peer can keep an incomplete block open and exhaust heap memory before request decoding, affecting an ember-server or ember-client configured with withHttp2. The remediation tracks accumulated size against SETTINGS_MAX_HEADER_LIST_SIZE derived from EmberServerBuilder.maxHeaderSize or EmberClientBuilder.maxResponseHeaderSize, sends GOAWAY when the limit is exceeded, and applies receiveHeadersTimeout to incomplete blocks. This issue is fixed in versions 0.23.35 and 1.0.0-M47. |
| CVE-2026-75092 | A privilege escalation flaw was found in the scan_mysql actor of leapp-upgrade-el9toel10 (provided by leapp-repository). During RHEL 9 to RHEL 10 upgrades, the actor runs:
mysqld --validate-config --log-error-verbosity=2 directly as root in the Leapp actor context, bypassing the packaged MySQL systemd unit that normally starts the daemon as User=mysql.
A process compromised as the mysql OS identity can write a version-2 persisted configuration (mysqld-auto.cnf) and a malicious shared object into /var/lib/mysql (a directory owned by mysql). That persisted map can set plugin_dir to /var/lib/mysql and early_plugin_load (or related loader options such as plugin_load / plugin_load_add) so MySQL loads the attacker-controlled object during configuration validation. Plugin loading can reach dlopen() before MySQL’s runtime-user check and before plugin-symbol validation.
When an administrator subsequently runs the documented Leapp preupgrade or upgrade workflow, attacker-controlled code can execute as UID 0 with a full capability set in an unconfined SELinux domain (unconfined_t). The attack does not require write access to the default system plugin path under /usr; redirecting plugin_dir via mysql-owned persisted state is sufficient. Ordinary SQL privileges alone (including highly privileged SQL accounts) are not a sufficient startpoint — OS-level execution as the mysql service identity is required, plus later administrator invocation of Leapp. |
| CVE-2026-76159 | Incorrect Permission Assignment for Critical Resource in the configuration loader of Duplicati for Windows versions before v2.4.0.0 allows a local low-privileged attacker to escalate privileges to NT AUTHORITY\SYSTEM via an attacker-controlled preload.json file. |
| CVE-2026-76680 | Vulnerabilities in the API of EdgeConnect SD-WAN Orchestrator could allow a remote attacker authenticated with low privileges to conduct server-side request forgery (SSRF) attacks. A successful exploit allows an attacker to enumerate information about the internal structure of the EdgeConnect SD-WAN Orchestrator host leading to potential disclosure of sensitive information beyond what is authorized by the user's existing privilege level. |
| CVE-2026-76681 | A vulnerability in the API of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker with low privileges to access sensitive information beyond what is authorized by the user's existing privilege level. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by EdgeConnect SD-WAN Orchestrator. |
| CVE-2026-76682 | A vulnerability in the network security monitoring component of intrusion detection systems could allow an unauthenticated remote attacker to exploit a limited buffer overflow. Successful exploitation could allow an attacker to cause a denial-of-service or potentially execute arbitrary code on the system. |
| CVE-2026-76683 | Buffer overflow vulnerabilities exist in the API endpoint of HPE Networking EdgeConnect SD-WAN Gateways that could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system leading to complete system compromise. |
| CVE-2026-76684 | Vulnerabilities have been identified in the API of HPE Networking EdgeConnect SD-WAN Orchestrator that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative privileges leading to complete compromise of the EdgeConnect SD-WAN Orchestrator host. |
| CVE-2026-76686 | A vulnerability exists in the underlying operating system of HPE Networking EdgeConnect SD-WAN Gateways. Successful exploitation could allow an unauthenticated remote attacker to conduct a denial-of-service attack on the affected service. |
| CVE-2026-76687 | A vulnerability in the API endpoint of HPE Networking EdgeConnect SD-WAN Orchestrator could allow a low-privilege authenticated remote attacker to escalate privileges. Successful exploitation of this vulnerability may enable the attacker to execute arbitrary system commands with root privileges on the underlying operating system. |
| CVE-2026-76688 | Vulnerabilities have been identified in the web-based management interface of EdgeConnect SD-WAN Orchestrator that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative privileges leading to complete compromise of the EdgeConnect SD-WAN Orchestrator host. |
| CVE-2026-76689 | A vulnerability exists in the configuration processing logic of the affected component where malformed input is improperly processed. An authenticated remote attacker with administrative privileges could exploit this vulnerability by providing specially crafted configuration data. Successful exploitation could result in a stack-based buffer overflow, potentially leading to remote code execution with root privileges or a denial of service due to a system crash. |
| CVE-2026-76820 | OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260701.0, the synchronizerFetch GraphQL query called fetchRemoteStreams after checking only that a remote stream URL used HTTP or HTTPS. The backend did not apply the ingestion deny list or reject private, loopback, and link-local destinations, allowing an authenticated account with the INGESTION capability to make OpenCTI request internal services and cloud metadata endpoints. Returned connection errors could distinguish open HTTP ports, open non-HTTP ports, and closed ports, enabling internal network scanning, while compatible endpoint responses could disclose internal data. This issue is fixed in version 7.260701.0. |
| CVE-2026-76821 | OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260706.0, the JSON ingestion mapper's extractWithRegexp formula function compiled a user-supplied regular expression with the JavaScript RegExp engine in opencti-platform/opencti-graphql/src/parser/json-mapper.ts without validating its complexity. An authenticated user with JSON mapper creation permission could provide a catastrophically backtracking pattern and matching ingestion input, blocking the Node.js event loop and making the GraphQL API unavailable to all users. Scheduled ingestion could repeatedly execute the malicious mapper without additional attacker action, and recovery could require disabling the mapper and restarting the process. The issue affects availability and does not expose or modify data. This issue is fixed in version 7.260706.0. |
| CVE-2026-76852 | Netcore NR268 firmware version 1.7.121109 has an improper integrity verification flaw in mtd_write allowing forged firmware authenticity checks. Attackers can exploit put_file.cgi and check_image_uuid.c to bypass firmware signature validation and load unauthorized firmware images. |
| CVE-2026-76853 | Netcore NR268 firmware version 1.7.121109 contains a security check bypass vulnerability in the parame_put_file.cgi restore archive prefix validation. Attackers can exploit the flawed prefix check in put_parame_file_cgi.c to bypass restricted restore archive handling. |
| CVE-2026-76854 | Netcore NR255-V version 1.5.130703 contains a sensitive information disclosure vulnerability in l7_web_auth_user_show.cgi related to captive-portal credential handling. Attackers can query this component to obtain captive-portal user credentials, compromising confidentiality of authenticated network access. |
| CVE-2026-76855 | Netcore NR255-V version 1.5.130703 contains a sensitive information disclosure vulnerability in the audit endpoints handled by l7_web_auth_log_dump_cgi.c, audit_get_cgi.c, and mod_dispatch_auth/plan.json. Attackers can query these audit components to obtain other users' session and browsing history data across sessions. |
| CVE-2026-76856 | Netcore NR255-V firmware version 1.5.130703 contains a cross-site request forgery vulnerability affecting the wan_config_set_cgi, wan_num_set_cgi, and lan_ip_change_cgi endpoints. Attackers can craft forged requests to trick authenticated administrators into modifying WAN or LAN network configuration settings without consent. |
| CVE-2026-76857 | Netcore NR255-V firmware version 1.5.130703 contains a sensitive information disclosure vulnerability in the ddns_wan_list_show.cgi endpoint and related DDNSset_cgi, IGD_GetCgiHandler, and IGD_CgiCall components. Attackers who reach this CGI handler can obtain plaintext DDNS credentials, exposing sensitive account information. |
| CVE-2026-76858 | Netcore NR255-V version 1.5.130703 contains a stored cross-site scripting vulnerability in ddns_wan_list_show.cgi caused by unsafe eval() handling of DDNS data. Attackers can inject malicious script through the DDNS configuration path, leading to persistent execution when the affected page is viewed. |
| CVE-2026-76859 | Netcore NR255-V version 1.5.130703 contains a sensitive information disclosure vulnerability in the user_pass_show.cgi component. Low-privilege attackers can exploit this flaw via ui_config_2.xml and misc.js to disclose router credentials. |
| CVE-2026-77179 | On macOS, the virtio-fs host server used by Docker Sandboxes improperly follows symlinks when reopening an unlinked file from a stored path. A malicious guest can replace a parent directory with a symlink, escape the shared workspace, and read or modify arbitrary host files as the VMM user, potentially achieving host code execution. |
| CVE-2026-77853 | Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in FF-RFI079I4 and FF-RFI078I4. A user who can log in to the product's M-Plane (NETCONF) may execute arbitrary OS commands. |
| CVE-2026-77972 | Time-of-check Time-of-use (TOCTOU) Race Condition in Slab safeurl allows an attacker who controls a hostname's DNS responses to reach internal network destinations that validation rejected.
Validation returns a verdict and not the address it approved, so the HTTP clients the library ships receive the original hostname and resolve it a second time when the request is made. An attacker who controls the authoritative DNS for a name can answer the first lookup with a permitted address and the second with a blocked one, and the request then reaches a destination validation never approved. The same window opens without an attacker whenever a name legitimately resolves to different addresses across lookups, such as short record lifetimes or rotation between several addresses.
This issue affects safeurl: from 0.1.0 onward. |
| CVE-2026-78225 | A hardcoded cryptographic server key vulnerability exists in the deployer-ng Update Controller component of Wärtsilä FOS-Onboard. |
| CVE-2026-79303 | kaiten from 57.192.20 to before 57.214.26 is vulnerable to SQL Injection. Dynamic SQL statements are generated without the required data validation and without using parameterized statements or stored procedures. |
| CVE-2026-79409 | An issue in Webkul Bagisto 2.4.9 allows a remote attacker to obtain sensitive information via the add-to-cart API and the downloadable fulfilment components. |
| CVE-2026-79410 | Improper validation of the quantity parameter in the add-to-cart path of Webkul Bagisto v2.4.9 allows authenticated attackers to reduce their order total below the legitimate price of shippable goods. |
| CVE-2026-79411 | Incorrect privilege assignment in the admin user-management component of Webkul Bagisto 2.4.9 allows an authenticated backend user holding only the settings.users.edit permission to escalate to full administrator. The user-update endpoint (route admin.settings.users.update, UserController::update()) does not verify that the actor is permitted to grant the requested role, does not prevent a user from changing their own role, and does not restrict assignment to roles whose permission set is a subset of the actor's own. By submitting a request that sets role_id to the Administrator role for their own account, a low-privileged administrator gains every admin-panel capability, including store configuration, payment gateway credentials, and customer PII. |
| CVE-2026-79425 | An authenticated Server-Side Request Forgery (SSRF) in the /adminapi/file/online_upload component of CRMEB v6.0.0 allows attackers to scan internal resources via a crafted POST request. |
| CVE-2026-79699 | A flaw was found in the containers/storage library. A crafted tar archive containing a malicious whiteout header (e.g. victim/.wh.) can cause the extraction destination directory to be replaced with an arbitrary file when processed by storage/pkg/archive.UnpackLayer, ApplyLayer, or ApplyUncompressedLayer. |
| CVE-2026-79705 | A flaw was found in the buildah/copier Go package. When used outside of Buildah by a non-root caller, a crafted tar archive containing malicious symlinks can escape the target extraction directory and create files outside the intended destination. Buildah itself uses chroot hardening and is not affected. |
| CVE-2026-79994 | The guest-to-host Unix-domain socket relay in Docker Sandboxes validates that a socket path is inside an authorized workspace, but later reconnects using the pathname. A malicious guest can replace an intermediate directory with a symlink between validation and connection, causing the host to connect to an arbitrary AF_UNIX socket outside the shared workspace. This can expose data or host-side capabilities provided by the targeted socket. |
| CVE-2026-80217 | Hidden functionality issue exists in FF-RFI079I4 and FF-RFI078I4, which may allow a user who can log in via SSH and access the enable mode on the product to execute arbitrary OS commands. |
| CVE-2026-80489 | Converting crafted EUC_JISX0213 input to UCS-4 or the internal wide character encoding, for example with iconv, in the GNU C Library version 2.3 to 2.44 may result in the converter making no progress, causing the calling application to hang.
Some EUC_JISX0213 sequences decode to two code points. If the output buffer has room for only the first one, the converter stores the second in the conversion state and returns E2BIG, but it never clears that pending character after emitting it on the next call. The converter then keeps emitting the pending character without consuming further input, so an application that retries the conversion loops forever. The input must be attacker controlled and the application must convert it with an output buffer small enough to split the two code points. Only the EUC_JISX0213 character set is affected, which is not commonly used. The related defect in SHIFT_JISX0213 converter is tracked separately as CVE-2026-77117. |
| CVE-2026-83160 | Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having Create Table privilege with network access via Oracle Net to compromise RDBMS. Successful attacks of this vulnerability can result in takeover of RDBMS. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83271 | Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having Execute on DBMS_REDEFINITION privilege with network access via Oracle Net to compromise RDBMS. Successful attacks of this vulnerability can result in takeover of RDBMS. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83272 | Vulnerability in the Oracle Text component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Difficult to exploit vulnerability allows low privileged attacker having Create Index privilege with network access via Oracle Net to compromise Oracle Text. While the vulnerability is in Oracle Text, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Text. CVSS 3.1 Base Score 8.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H). |
| CVE-2026-83333 | Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| CVE-2026-83342 | Vulnerability in the Oracle Utilities Network Management System product of Oracle Utilities Applications (component: System Wide). Supported versions that are affected are 2.4.0.1.0-2.4.0.1.33, 2.5.0.1.0-2.5.0.1.19, 2.5.0.2.0-2.5.0.2.13, 2.6.0.1.0-2.6.0.12B, 2.6.0.2.0-2.6.0.2.10A and 25.12.0.0.0-25.12.0.0.3. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Utilities Network Management System executes to compromise Oracle Utilities Network Management System. Successful attacks of this vulnerability can result in takeover of Oracle Utilities Network Management System. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83343 | Vulnerability in the Oracle Utilities Network Management System product of Oracle Utilities Applications (component: System Wide). Supported versions that are affected are 2.5.0.2.0-2.5.0.2.13, 2.6.0.1.0-2.6.0.12B, 2.6.0.2.0-2.6.0.2.10A and 25.12.0.0.0-25.12.0.0.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Utilities Network Management System. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Utilities Network Management System accessible data as well as unauthorized update, insert or delete access to some of Oracle Utilities Network Management System accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:N). |
| CVE-2026-83347 | Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via TCPS to compromise Oracle Net Services. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H). |
| CVE-2026-83348 | Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows low privileged attacker having Create DB Link privilege with network access via Oracle Net to compromise RDBMS. Successful attacks of this vulnerability can result in takeover of RDBMS. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83349 | Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| CVE-2026-83350 | Vulnerability in the Oracle Net Services component of Oracle Database Server. Supported versions that are affected are 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise Oracle Net Services. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Net Services. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| CVE-2026-83351 | Vulnerability in the RDBMS component of Oracle Database Server. Supported versions that are affected are 23.4.0-23.26.3. Difficult to exploit vulnerability allows unauthenticated attacker with network access via Oracle Net to compromise RDBMS. Successful attacks of this vulnerability can result in takeover of RDBMS. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83355 | Vulnerability in the Oracle Enterprise Manager for Fusion Middleware product of Oracle Enterprise Manager (component: Metrics). Supported versions that are affected are 13.5 and 24.1. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Enterprise Manager for Fusion Middleware. Successful attacks of this vulnerability can result in takeover of Oracle Enterprise Manager for Fusion Middleware. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83357 | Vulnerability in the Oracle GraalVM for JDK, Oracle GraalVM product of Oracle Java SE (component: Compiler). The supported version that is affected is Oracle GraalVM for JDK 17: 23.0.13.1; Oracle GraalVM for JDK 21: 23.1.12.1; Oracle GraalVM: 25.0.4.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle GraalVM for JDK, Oracle GraalVM. Successful attacks of this vulnerability can result in takeover of Oracle GraalVM for JDK, Oracle GraalVM. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-83408 | Vulnerability in the Oracle GraalVM for JDK, Oracle GraalVM product of Oracle Java SE (component: Compiler). The supported version that is affected is Oracle GraalVM for JDK 17: 23.0.13.1; Oracle GraalVM for JDK 21: 23.1.12.1; Oracle GraalVM: 25.0.4.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle GraalVM for JDK, Oracle GraalVM. Successful attacks of this vulnerability can result in takeover of Oracle GraalVM for JDK, Oracle GraalVM. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-85013 | A flaw was found in environment-modules. A local attacker can exploit this vulnerability by placing a maliciously named modulefile in a location visible to the victim's `MODULEPATH`. When the victim uses Bash completion for `module` or `ml` commands, the malicious module name, containing shell metacharacters, is evaluated as a command. This can lead to arbitrary command execution in the completing user's shell, impacting their confidentiality, integrity, and availability. |
| CVE-2026-85234 | A flaw was found in tftp-hpa. When the `in.tftpd` remap engine processes an inverse remap rule that also aborts with a non-empty custom error message, it can pass invalid match offsets to the `genmatchstring()` function. This leads to out-of-bounds read/write operations. A remote, unauthenticated attacker can exploit this vulnerability by sending a specially crafted request, causing the daemon to crash and resulting in a denial of service. |
| CVE-2026-86818 | fast-uri is a dependency-free RFC 3986 URI parser for Node.js, used by Fastify and ajv, that added a mailto scheme parser in version 4.1.3. In versions 4.1.3 and 4.1.4, the mailto parser compares each query field name to the reserved names to, subject, and body while the name is still percent-encoded, and decodes it only when storing it as a generic header, so a percent-encoded spelling of a reserved field name is not recognized as that field at parse time but is re-emitted as the literal field name when the parsed URI is serialized. An application that validates, logs, or displays the recipient list from the first parse and then serializes the URI and sends it can silently gain an attacker-chosen recipient, and the subject and body fields can be smuggled across the same roundtrip. The issue is fixed in fast-uri 4.1.5, and users should upgrade to 4.1.5 or later. As a workaround, do not act on a mailto URI that fast-uri has re-serialized without first decoding and re-validating its recipient, subject, and body fields. |
| CVE-2026-87270 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: This vulnerability applies to Windows host only. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-87271 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: This vulnerability applies to Windows host only. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-87272 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| CVE-2026-87273 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 8.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H). |
| CVE-2026-87274 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 4.4 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:U/C:N/I:N/A:H). |
| CVE-2026-87275 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle VM VirtualBox accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 4.6 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:L/I:N/A:L). |
| CVE-2026-87276 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:R/S:C/C:H/I:H/A:H). |
| CVE-2026-87277 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows unauthenticated attacker with network access via RDP to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H). |
| CVE-2026-87278 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox as well as unauthorized update, insert or delete access to some of Oracle VM VirtualBox accessible data. CVSS 3.1 Base Score 6.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:H). |
| CVE-2026-87279 | Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.16. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle VM VirtualBox as well as unauthorized update, insert or delete access to some of Oracle VM VirtualBox accessible data. CVSS 3.1 Base Score 6.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:L/A:H). |
| CVE-2026-88261 | Improper input validation vulnerability in bizwell xClick allows Stored XSS.
This issue affects xClick: R2, R3, and R3.1. |
| CVE-2026-88262 | Insufficient session expiration vulnerability in bizwell xClick allows Authentication Bypass.
This issue affects xClick: R2, R3, and R3.1. |
| CVE-2026-88616 | An issue in RuoYi-Vue-Plus 6.0.0 allows a remote attacker to execute arbitrary code via the FlwTaskController.java component, and the FlwTaskServiceImpl.completeTask, CompleteExecuteComponent.process, Warm-Flow TaskService.skip, POST /workflow/task/completeTask components |
| CVE-2026-88617 | SmartAdmin v3.30.0 contains an authorization flaw in the configuration query endpoint. This allows a remote attacker to escalate privileges. |
| CVE-2026-88618 | 1024-lab SmartAdmin v3.30.0 contains a stored cross-site scripting vulnerability in its file upload functionality. This allows a remote attacker to execute arbitrary code. |
| CVE-2026-88619 | 1024-lab SmartAdmin v3.30.0 contains a missing authorization vulnerability in the scheduled-job management module. The AdminSmartJobController exposes scheduled-job management endpoints without method-level permission checks, allowing a low-privileged authenticated user to access functionality intended for authorized administrators. |
| CVE-2026-88922 | The go-getter library up to versions 1.8.8 and 2.2.3 is vulnerable to a privilege escalation issue in its archive decompression handling that may allow a crafted archive to cause extracted files to be created with elevated permission bits. Where extraction is performed by a privileged user, this may allow a local actor to obtain the privileges of the extracting process. This vulnerability (CVE-2026-88922) is fixed in go-getter 1.8.9 and 2.2.4. |
| CVE-2026-88975 | Http4s is a Scala interface for HTTP services. Prior to 0.23.37 and 1.0.0-M48, Ember’s HTTP/2 read loop parses a frame’s 24-bit declared length but waits to buffer the entire payload before comparing it with SETTINGS_MAX_FRAME_SIZE. An unauthenticated peer can declare a payload near 16 MiB on a connection where Ember advertised 16 KiB and either complete or slowly stream it, causing up to 1024-fold memory amplification per connection before processFrame can reject the frame. The shared H2Connection.readLoop affects withHttp2 servers and clients, while HTTP/2-disabled configurations are unaffected, and the patch rejects oversized frames before buffering their payloads. This issue is fixed in versions 0.23.37 and 1.0.0-M48. |
| CVE-2026-89022 | BookStack before 26.05.5 contains an authentication bypass vulnerability in its social login implementation that allows unauthenticated attackers to sign in as arbitrary users by authenticating through a different social provider sharing the same driver_id namespace. Attackers can authenticate at one enabled social provider using a user ID that matches an account linked to a different social provider, bypassing credential verification entirely because the SocialAuthService::handleLoginCallback query ignores the driver column when retrieving linked account records. |
| CVE-2026-89025 | Hirschmann HiOS Switch Platform devices contain a denial-of-service vulnerability in the integrated web server due to missing validation of HTTP(S) content. A remote unauthenticated attacker can send a specially crafted HTTP(S) request to a specific endpoint that is processed incorrectly, causing the device to perform an unintended reboot and resulting in a temporary denial-of-service condition. This vulnerability has been addressed in versions 07.1.12, 08.7.10, 09.0.13, 09.3.03, 10.3.08, and 10.5.00. |
| CVE-2026-89040 | Tencent Mass Service Engine in Cluster (MSEC) allows a remote, unauthenticated attacker to send a crafted POST request including ../ and gain root access on the target device. An attacker who uploads a webshell can execute arbitrary code as root. |
| CVE-2026-89308 | An unauthenticated OS command injection vulnerability exists in the ping.php endpoint, allowing remote attackers to execute arbitrary commands on the underlying operating system and achieve remote code execution. |
| CVE-2026-90439 | NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module. When using HTTP/3 with OpenSSL versions <= OpenSSL 3.5.0 under certain configurations, a limited heap buffer overflow could happen while processing a TLS handshake. This can happen in a non-deterministic manner that is beyond the attacker's control. This may cause a heap buffer overflow in the NGINX worker process leading to a restart and/or limited data corruption.
Impact:
This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or limited data corruption. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| CVE-2026-91090 | A vulnerability was determined in GPAC up to f1219cde. The affected element is the function gf_node_activate_ex of the file scenegraph/base_scenegraph.c. This manipulation causes stack-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. Upgrading to version abi-16.23 is sufficient to fix this issue. Patch name: 9eb40df4448b88d6a6ce3454657c06f47eff0b24. The affected component should be upgraded. |
| CVE-2026-91091 | A vulnerability was identified in GPAC up to f1219cde. The impacted element is the function gf_node_list_insert_child of the file scenegraph/base_scenegraph.c of the component Node Insertion. Such manipulation leads to memory corruption. The attack can be launched remotely. The exploit is publicly available and might be used. Upgrading to version abi-16.23 is sufficient to resolve this issue. The name of the patch is 49dee5cad329cfed310c1682703df7daa47df31a. It is suggested to upgrade the affected component. |
| CVE-2026-91751 | Flextype CMS through 1.0.0-alpha.3 fails to properly validate id and new_id parameters in the Entries REST API, allowing API token holders to read, create, or overwrite files outside the entries directory. Attackers can use traversal sequences in API requests to escape the project entries directory and manipulate arbitrary files and directories on the filesystem. |
| CVE-2026-91780 | A weakness has been identified in GNU Binutils 2.47. This impacts the function elf_link_add_object_symbols of the file bfd/elflink.c. Executing a manipulation can lead to null pointer dereference. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through a bug report but has not responded yet. |
| CVE-2026-91781 | A security vulnerability has been detected in GNU Binutils 2.47. Affected is the function elf_x86_64_common_section_index of the file bfd/elf64-x86-64.c of the component ELF Section Handler. The manipulation leads to null pointer dereference. The attack needs to be performed locally. The exploit has been disclosed publicly and may be used. Upgrading to version 2.48 is able to address this issue. The identifier of the patch is 7322e9bc30cb282575a701c307851fd3d66fee68. It is suggested to upgrade the affected component. |
| CVE-2026-91782 | A vulnerability was detected in GNU Binutils 2.47. Affected by this vulnerability is the function elf_x86_allocate_dynrelocs of the file bfd/elfxx-x86.c of the component Dynamic Relocation Allocation. The manipulation results in null pointer dereference. The attack requires a local approach. The exploit is now public and may be used. Upgrading to version 2.48 addresses this issue. The patch is identified as d1268210b6f6/471130b39c0/283d3198bed/0a84e560216/a692a633d40. Upgrading the affected component is recommended. |
| CVE-2026-91786 | A flaw was found in GNOME Shell. When processing icons from a remote search provider via D-Bus, the system fails to validate the icon's declared dimensions against the actual data buffer size. A malicious or compromised remote search provider could exploit this by providing oversized icon dimensions, leading to an out-of-bounds read. This can cause the GNOME Shell process to crash, disrupting the user's session, and potentially disclose sensitive information from adjacent memory. |
| CVE-2026-91842 | A vulnerability has been found in OpenBankProject OBP-API up to 1.10.1. This impacts the function KryoInjection.invert of the file obp-api/src/main/scala/code/api/cache/Redis.scala of the component Kryo Handler. Such manipulation leads to deserialization. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is said to be difficult. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-91846 | Affected versions of MISP allow a collection element to be created from a bare UUID without consistently checking whether the acting user is allowed to access the referenced object.
The commit explains that collection elements themselves only store UUIDs, while the collection view later resolves those UUIDs into their underlying objects. Before this fix, the generic add() path could therefore persist a UUID for an Event or Galaxy Cluster that the caller could not normally read. The patch explicitly notes that this made collections a way to reference another organisation’s private data and had caused disclosure of organisation-only events in the beta collection view.
The fix centralizes authorization in __assertCanUseElements(). Event UUIDs are validated through Event::fetchSimpleEvent() under the current user’s ACL, while Galaxy Cluster UUIDs are checked through GalaxyCluster::fetchGalaxyClusters(). The check is applied both to the CRUD add() path and to addElementToCollection().
Version affected: ≤2.5.45 |
| CVE-2026-91848 | A vulnerability was identified in WuzhiCMS up to 4.1.0. Affected by this issue is the function article::getDataOfJson of the file /index.php?m=content&f=article&v=getDataOfJson. The manipulation of the argument title/master_table leads to sql injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-91849 | A security flaw has been discovered in WuzhiCMS up to 4.1.0. This affects the function member::setAvatar of the file /index.php?m=member&f=user&v=setAvatar of the component Avatar Upload. The manipulation of the argument File results in unrestricted upload. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| CVE-2026-91851 | Affected versions of MISP incorrectly filter dashboard templates that are restricted to a specific permission flag.
DashboardsController::listTemplates() allowed a template when either:
- its restrict_to_permission_flag matched one of the current user’s permission flags, or
- restrict_to_permission_flag equaled integer 0
However, restrict_to_permission_flag is a varchar. MySQL therefore performed numeric coercion when comparing the column against integer 0. Strings such as perm_site_admin convert numerically to zero, making expressions such as perm_site_admin = 0 evaluate true and causing the “unrestricted” branch to match permission-restricted templates as well.
Version affected: ≤2.5.45 |
| CVE-2026-91857 | Affected versions of MISP expose several state-changing controller actions without restricting them to POST.
The affected actions are:
- EventReportsController::purgeUnusedPictures()
- NoticelistsController::enableNoticelist()
- ServersController::removeOrphanedCorrelations()
- WorkflowsController::rebuildRedis()
The patch adds allowMethod(['post']) to each action, preventing them from being triggered through ordinary GET requests.
For purgeUnusedPictures(), the corresponding UI previously used $.get(). The fix converts that request to POST and supplies X-CSRF-Token, while the controller enables header-only CSRF validation for that AJAX action.
Because GET requests can be induced cross-origin through links, images, redirects, or navigation, accepting GET for these state-changing operations can let an attacker trigger them using the authenticated victim's session.
Version affected: ≤2.5.45 |
| CVE-2026-91859 | Affected versions of MISP can record incorrect access-log data for requests that terminate in an exception.
Because CakeErrorController extends AppController, exception rendering runs the application startup path a second time. As a result, __accessMonitor() calls AccessLog::logRequest() twice for one HTTP request. The second deferred writer measures the error-controller execution instead of the original request and can overwrite the row created by the first pass. The corrupted fields include request duration, SQL query count, memory usage, and potentially the recorded query log.
The bug was masked because the same model instance retained the ID of the first saved row, causing the later save to issue an UPDATE rather than insert an obvious duplicate row.
Version affected: ≤2.5.45 |
| CVE-2026-91940 | crawl4ai before 0.9.3 contains an arbitrary file write vulnerability in PDFContentScrapingStrategy where the _filter_untrusted_fields function fails to validate untrusted configuration fields. Attackers can submit crafted config bodies with malicious image_save_dir paths to write attacker-controlled bytes into any directory accessible to the service account. |
| CVE-2026-91941 | Crawl4AI before 0.9.3 contains an uncontrolled resource consumption vulnerability in PDFContentScrapingStrategy that allows untrusted clients to cause denial of service. Attackers can select the PDF scraping strategy in POST requests to download large remote PDFs without size or page limits, exhausting disk, CPU, and bandwidth on shared workers. |
| CVE-2026-91942 | crawl4ai before 0.9.3 contains a DOM-based cross-site scripting vulnerability in the Docker Playground UI that assigns untrusted crawl results to element.innerHTML. Attackers can craft malicious PDFs with event-handler markup to execute JavaScript in the Playground origin and steal API tokens from sessionStorage for authenticated API abuse. |
| CVE-2026-91943 | Crawl4AI before 0.9.3 contains a server-side request forgery vulnerability in PDFContentScrapingStrategy where _get_pdf_path() re-downloads targets with Python requests without egress validation. Authenticated attackers can supply URLs that redirect to internal addresses or use DNS rebinding to access internal services, exfiltrating responses through PDF text extraction in crawl results. |
| CVE-2026-91944 | crawl4ai versions before 0.9.3 contain a DOM-based cross-site scripting vulnerability in the Playground UI where the forceHighlightElement() function assigns textContent back to innerHTML, re-parsing JSON responses as HTML. Attackers can inject malicious scripts through crawled page content like the page title to steal the operator's API token from sessionStorage and gain full server control. |
| CVE-2026-91970 | Vikunja versions before 2.6.0 contain a resource exhaustion vulnerability in the Planka migrator that fails to enforce aggregate memory budgets during migration jobs. Authenticated attackers can submit migration requests pointing to attacker-controlled servers advertising numerous size-compliant attachments, exhausting worker memory and causing denial of service for all users. |
| CVE-2026-91971 | Vikunja before 2.6.0 fails to apply pixel decode limits to avatar and project-background upload endpoints, allowing authenticated users to upload crafted images that decode to excessive pixel counts. Attackers can upload small images with extreme aspect ratios that consume significant CPU and memory during processing, causing denial of service through repeated or concurrent uploads. |
| CVE-2026-91972 | Vikunja versions before 2.6.0 fail to apply rate limiting to /api/v2 public authentication endpoints including login, register, password-reset, and OAuth token routes. Remote unauthenticated attackers can perform unbounded credential guessing, account enumeration, and password-reset flooding attacks without throttling restrictions. |
| CVE-2026-91973 | Vikunja before 2.6.0 contains an authentication bypass vulnerability in CalDAV BasicAuth endpoints that lack rate limiting protection. Remote unauthenticated attackers can issue unbounded credential-guessing requests against /dav, /.well-known, and /feeds routes to bypass the instance's anti-brute-force controls and compromise password-only accounts. |
| CVE-2026-91979 | Vikunja before 2.6.0 fails to limit archive expansion during data import, allowing authenticated users to cause denial of service. Attackers can upload highly compressed files that expand to tens of gigabytes in memory and disk, exhausting server resources and crashing the instance. |
| CVE-2026-91990 | Tornado before 6.5.8 contains a memory amplification vulnerability in parse_multipart_form_data that splits multipart data before validating the max_parts limit. Attackers can send crafted multipart requests with many parts to create large transient lists, exhausting server memory and causing denial of service. |
| CVE-2026-91991 | Tornado before 6.5.8 contains an incomplete fix for cookie attribute injection that allows attackers to inject arbitrary cookie attributes by passing capitalized or legacy keyword arguments to set_cookie. Attackers can embed semicolon-delimited data in capitalized parameters like Domain, Path, or SameSite to bypass validation and modify cookie security attributes. |
| CVE-2026-91993 | Jpom through 2.11.12 fails to validate workspace ownership when resolving repositoryId on the /build/branch-list endpoint, allowing authenticated users to access repositories from other workspaces. Attackers can submit repository identifiers from different workspaces to enumerate repository existence, determine repository type, and execute git ls-remote commands using other workspaces' stored credentials. |
| CVE-2026-91994 | Semaphore UI through 2.19.12 exempts GET and HEAD requests from project resource permission checks in GetMustCanMiddleware. Attackers with guest or task_runner roles can read all project environments including plaintext secrets, credentials, and passwords via GET requests to the environment endpoint. |
| CVE-2026-91995 | pig before 4.1.0 contains an authentication bypass vulnerability in the /register/password endpoint where password verification results are discarded, allowing any value as the current password. Remote attackers can submit a username with an incorrect current password to overwrite any account credential including the admin account and gain full administrative control. |
| CVE-2026-91996 | lamp-cloud through 5.10.0 whitelists the path pattern /*/anno/** for anonymous access, allowing unauthenticated attackers to read the server's full JVM system property map. Attackers can send POST requests to /defGenProject/anno/getProperties to retrieve sensitive information including JVM classpath, filesystem paths, operating system details, and startup secrets. |
| CVE-2026-91997 | evolution-api through 2.3.7 contains an incorrect array comparison in the metricsIPWhitelist middleware that always evaluates to false, allowing unauthenticated access to the /metrics endpoint. Attackers can bypass IP whitelist restrictions to access sensitive metrics disclosing server version, database client name, configured server URL, and WhatsApp instance details. |
| CVE-2026-91998 | Casdoor through 4.4.0 contains an authorization bypass vulnerability in the /api/mcp endpoint that allows attackers with any application's clientId and clientSecret to gain unrestricted access to user administration across all organizations. Attackers can enumerate user records including password salts and email addresses, create administrator accounts, modify existing users, and delete them in any organization by supplying legitimate credentials from a single application. |
| CVE-2026-92000 | adm-zip versions 0.5.14 through 0.6.0 fail to apply zlib decompression output limits when ZIP entries declare zero uncompressed size. Attackers can craft malicious ZIP archives with highly compressible entries declaring zero size to exhaust memory and cause denial of service. |
| CVE-2026-92002 | Affected versions of MISP use Redis to throttle repeated authentication-failure log entries. The intent is to avoid excessive duplicate logs while still recording failed authentication activity.
However, User->setupRedis() returns false when Redis cannot be reached. The vulnerable _shouldLog() logic only returned true when a Redis instance existed and no throttle key was present. Therefore, when Redis was unavailable, the function did not allow the log write at all, effectively silencing authentication-failure logging for the duration of the outage.
Version affected: ≤2.5.45 |
| CVE-2026-92003 | Affected versions of MISP do not consistently apply the existing authentication-failure logging throttle.
Two API authentication failure branches wrote directly to the Log model:
- API requests with no authentication key;
- requests supplying an API key with an incorrect length
Unlike other authentication failures, these paths bypassed _shouldLog(), so every request could create another durable auth_fail entry.
Version affected: ≤2.5.45 |
| CVE-2026-92082 | By default, Payara Server does not limit the number of failed login attempts, which can leave it vulnerable to brute force login attacks. To mitigate this, Payara Server includes built-in automatic attack protection. For configuration details, see https://docs.azul.com/payara/technical-documentation/payara-server-documentation/security-guide/administering-system-security.html . |
| CVE-2026-92176 | pdfforge PDF Architect App Object Out-Of-Bounds Read Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of pdfforge PDF Architect. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the handling of App objects. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28570. |
| CVE-2026-92177 | pdfforge PDF Architect PDF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of pdfforge PDF Architect. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28673. |
| CVE-2026-92178 | pdfforge PDF Architect PDF File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of pdfforge PDF Architect. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28916. |
| CVE-2026-92179 | pdfforge PDF Architect PDF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of pdfforge PDF Architect. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PDF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29219. |
| CVE-2026-92180 | pdfforge PDF Architect activation-service Update Service Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of pdfforge PDF Architect. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.
The specific flaw exists within the activation-service process. The product loads a library from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of SYSTEM. Was ZDI-CAN-29536. |
| CVE-2026-92184 | A security flaw has been discovered in ag-ui-protocol ag-ui 0.3.0. Affected is the function urllib.request.urlopen of the file integrations/aws-strands/python/src/ag_ui_strands/utils.py of the component Multimodal Content. The manipulation of the argument Value results in server-side request forgery. The attack can be executed remotely. The patch is identified as bf0c34df34cbb4b1992bc37c9bfffe6dd54bb189. It is advisable to implement a patch to correct this issue. |