| CVE-2025-71405 | chi versions before v5.2.2 contain an open redirect vulnerability in the RedirectSlashes middleware function that uses the Host header to construct redirect URLs. Attackers can manipulate the Host header to redirect users to arbitrary hosts, enabling phishing attacks and credential theft. |
| CVE-2026-12363 | The LoRaWAN Fragmented Data Block Transport service (subsys/lorawan/services/frag_transport.c) does not validate the fragment counter in a received DATA_FRAGMENT command before forwarding it to the configured decoder. In frag_transport_package_callback() the value frag_counter = hdr->frag_index_n & 0x3FFF is taken directly from the downlink payload and passed to the decoder, which derives an array index and flash offset as frag_counter - 1. DataFragment fragments are 1-indexed, so a frag_counter of 0 underflows that arithmetic.
With the default Semtech/LoRaMAC-node decoder, this reaches FragDecoder.FragNbMissingIndex[fragCounter - 1] = 0; in FragDecoderProcess(), where fragCounter - 1 evaluates to -1 and writes a uint16_t zero out of bounds, just before the array and into the adjacent MatrixM2B recovery-matrix state of the static decoder object (CWE-787). A companion write derives a wild flash offset, but that path is rejected by the flash_area_write() bounds check. The in-tree low-memory decoder (frag_dec()) is not corrupted: its out-of-range bit-array and flash accesses are caught by sys_bitarray_ and flash_area_ bounds checks.
The handler is the registered downlink callback for the fragmentation transport port, reachable whenever an active fragmentation session exists, so the triggering byte is attacker-influenceable LoRaWAN/FUOTA network input. Triggering it requires authenticated downlinks (LoRaWAN MAC session keys or a malicious/compromised network or FUOTA server) and an active fragmentation session. The impact is contained: corruption of decoder state and denial of the firmware-update (FUOTA) session rather than controllable memory corruption or code execution. The fix adds a transport-layer check that rejects frag_counter == 0, closing the defect for both decoder backends. |
| CVE-2026-12364 | The user-space system-call verifier z_vrfy_z_log_msg_static_create() in subsys/logging/log_msg.c was a pure pass-through: it forwarded the caller-supplied source, desc, package, and data arguments directly to the kernel-mode implementation z_impl_z_log_msg_static_create() without performing any of the mandatory K_SYSCALL_* checks. Because z_log_msg_static_create() is declared __syscall, under CONFIG_USERSPACE any unprivileged user-mode thread can invoke it directly with fully attacker-controlled arguments.
The kernel-mode handler dereferences each of these untrusted values: frontend_runtime_filtering() reads through the source pointer as a struct log_source_dynamic_data, cbprintf_package_copy() reads desc.package_len bytes from the package pointer, and z_log_msg_finalize() performs a memcpy() of desc.data_len bytes from the data pointer. With no verification, a user thread can supply arbitrary kernel addresses and arbitrary lengths, and the kernel will read from them.
The impact is a kernel-mode denial of service (the kernel faults dereferencing an attacker-chosen pointer) and, where a log backend output is observable to the attacker, disclosure of arbitrary kernel memory copied into the emitted log message — a confidentiality breach across the user/kernel boundary that the userspace sandbox is meant to enforce. The reads do not corrupt kernel memory, so there is no out-of-bounds write primitive.
The fix adds the required validation to the verifier: it bounds desc.package_len against Z_LOG_MSG_MAX_PACKAGE, rejects non-NULL/length mismatches, and applies K_SYSCALL_MEMORY_READ() to package, data, and (when runtime filtering with a frontend is enabled) source, so any out-of-bounds or kernel pointer now raises K_OOPS instead of being honored. |
| CVE-2026-12365 | A use-after-free exists in the Zephyr second-generation work queue (kernel/work.c) in the handling of delayable work timeouts. When a delayable work item's timeout has been dequeued and its handler work_timeout() is in flight (blocked acquiring the work-queue spinlock), a concurrent cancellation does not wait for that handler to finish. In unschedule_locked() the pre-fix code called z_abort_timeout(), which for an already-announcing record returns -EINVAL without removing it; cancel_async_locked() then observes the work as idle, so even k_work_cancel_delayable_sync() and k_work_flush_delayable() return without blocking on the in-flight handler.
Because those are the APIs the kernel header documents as the safe way to cancel before freeing a k_work_delayable, a caller that frees the object immediately after a successful sync cancel can race the still-pending handler. work_timeout() subsequently dereferences the freed record: it reads to->dticks via z_is_timeout_handler_canceled() and, if the freed slot has been reused so the bail check fails, performs a read-modify-write of wp->flags (K_WORK_DELAYED_BIT) and submits work against a stale dw->queue pointer — a use-after-free read and write.
The k_work API is kernel-mode only (no __syscall entry point), so this is a kernel-internal concurrency defect rather than a userspace privilege escalation. Triggering it requires an SMP build and a subsystem that schedules and then frees (or reschedules) a delayable work item in the narrow window while its timeout is announcing; an attacker able to influence the timing of such teardown (for example via connection churn driving subsystem timers) has a plausible but probabilistic path. The impact is kernel memory corruption or crash (denial of service).
The fix makes unschedule_locked() wait, by spinning on z_try_abort_timeout() returning -EAGAIN while releasing and re-acquiring the work spinlock, until any in-flight handler completes before returning, and switches work_timeout() to atomic K_WORK_DELAYED_BIT ownership. This closes both the free-then-handler use-after-free and the related reschedule early-fire race. |
| CVE-2026-12366 | Zephyr's dynamic kernel-object disposal path unref_check() in kernel/userspace/userspace.c frees an object's storage (k_free(dyn->data)) once its reference count reaches zero, after running a per-object-type cleanup. The cleanup switch handled only K_OBJ_MSGQ and K_OBJ_STACK; there was no K_OBJ_TIMER case. A dynamically-allocated, initialized, and armed k_timer keeps its embedded struct _timeout dnode linked in the global timeout queue (_timeout_q), so freeing the timer storage without cancelling the timeout leaves a dangling node in that queue.
When the timer next expires, the timeout machinery walks _timeout_q and invokes z_timer_expiration_handler() on the freed node, dereferencing and writing freed (and reusable) kernel heap in kernel/ISR context. This is a deterministic use-after-free that does not depend on SMP: the queued node is simply never unlinked at free time.
The disposal is reachable from an unprivileged user thread under CONFIG_USERSPACE + CONFIG_DYNAMIC_OBJECTS: a thread that holds the last permission on such a timer drops it via the k_object_release() syscall (or by exiting, through k_thread_perms_all_clear()), and can arm the timer itself via the k_timer_start() syscall. The free and the expiration handler run at kernel privilege while the actor is a user thread, so the bug is a sandbox-escape memory-corruption primitive usable for privilege escalation. The fix adds k_timer_cleanup() (cancel the timeout and wait for any in-flight handler) and calls it for K_OBJ_TIMER before freeing. |
| CVE-2026-13002 | A flow has been identified into dnssec.c library, causing an infinite loop to dnsmasq service. An attacker who controls any DNSSEC-signed zone can hang the dnsmasq process with a single crafted response, killing all DNS resolution for its clients. |
| CVE-2026-13196 | Nozomi Networks Labs identified a CWE-787: Out-of-bounds Write vulnerability in the process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker with device configuration access to write attacker-controlled data outside the bounds of the process-image buffer and corrupt adjacent kernel memory, resulting in kernel memory corruption and denial of service, by supplying crafted device configuration data and crafted input through the piControl character device. |
| CVE-2026-13197 | Nozomi Networks Labs identified a CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the configuration and process-image management functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker to trigger use-after-free and invalid pointer dereferences on kernel configuration objects, resulting in kernel memory corruption and denial of service, by issuing concurrent crafted requests through the piControl character device. |
| CVE-2026-13198 | Nozomi Networks Labs identified a CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the event notification functionality of KUNBUS piControl in version 2.6.2 that allows a local authenticated attacker to corrupt kernel heap and event-list state and disclose a small amount of adjacent kernel memory, resulting in kernel memory corruption and denial of service, by issuing concurrent crafted requests from multiple threads through the piControl character device. |
| CVE-2026-1621 | Authentication bypass by primary weakness vulnerability in Universal Software Inc. E-Municipality allows Exploitation of Trusted Identifiers.
This issue affects E-Municipality: from 20251127 before 20260204. |
| CVE-2026-19679 | An input validation vulnerability exists in Security Center's file upload handling, where insufficient sanitization of uploaded filenames could contribute to a downstream command injection issue. |
| CVE-2026-19680 | A SQL injection vulnerability exists in Security Center that could allow an attacker to access unauthorized data from the application's database. |
| CVE-2026-19681 | An authenticated command injection vulnerability exists in Security Center related to file upload processing. An attacker could exploit this issue by uploading a specially crafted file, potentially resulting in arbitrary command execution on the underlying operating system. |
| CVE-2026-19682 | A command injection vulnerability exists in Security Center where a remote, unauthenticated attacker could exploit this issue to execute arbitrary commands on the underlying operating system with the privileges of the service account. |
| CVE-2026-19826 | A vulnerability was detected in alldatacenter alldata up to 0.6.8. This affects the function Hessian2Input.readObject of the file /serialize/impl/HessianSerializer.java of the component xxl-rpc Listener. The manipulation results in deserialization. The attack may be performed from remote. The exploit is now public and may be used. The project closed the issue report as "not planned" without any further explanation. |
| CVE-2026-19828 | A vulnerability was identified in 648540858 wvp-GB28181-pro 2.7.4-20260107. This affects an unknown part of the file PlayController.java of the component Snapshot Endpoint. The manipulation of the argument deviceId/channelId leads to path traversal. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| CVE-2026-19829 | A security flaw has been discovered in 648540858 wvp-GB28181-pro 2.7.4-20260107. This vulnerability affects unknown code of the file LogController.java of the component Log File Download Endpoint. The manipulation of the argument fileName results in path traversal. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. |
| CVE-2026-19834 | A vulnerability was determined in Webkul Bagisto up to 2.4.4. Affected is an unknown function of the file /admin/customers/login-as-customer/ of the component Admin Customer Impersonation Feature. This manipulation of the argument ID causes authorization bypass. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| CVE-2026-19835 | A vulnerability was identified in Webkul Bagisto up to 2.4.4. Affected by this vulnerability is an unknown functionality of the component Customer Item Deletion Endpoint. Such manipulation leads to improper access controls. The attack can be launched remotely. The exploit is publicly available and might be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| CVE-2026-19836 | A security flaw has been discovered in Webkul Bagisto up to 2.4.4. Affected by this issue is some unknown functionality of the file /admin/customers/view of the component Backend Customer Detail Feature. Performing a manipulation of the argument ID results in authorization bypass. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| CVE-2026-19837 | A weakness has been identified in Webkul Bagisto up to 2.4.4. This affects an unknown part of the file /admin/customers/search of the component Customer Search. Executing a manipulation of the argument Query can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| CVE-2026-19838 | A security vulnerability has been detected in Webkul Bagisto up to 2.4.4. This vulnerability affects unknown code of the file /admin/reporting/sales/ of the component Backend Reporting Endpoint. The manipulation leads to authorization bypass. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." |
| CVE-2026-19870 | Authorization Bypass Through User-Controlled Key in the payroll module in Roskus Prospero Flow CRM before 5.15.10 allows authenticated users holding the read payroll permission to view the salary and banking details of employees of any other company in the instance, and users holding the create payroll permission to create payroll records attributed to another company's employees, because the listing query is not scoped to the caller's company and the employee identifier is validated for global existence rather than company membership |
| CVE-2026-19871 | Use of Hard-coded Credentials in the human resources component in Roskus Prospero Flow CRM before 5.15.9 allows unauthenticated remote attackers to authenticate as any employee onboarded through the standard flow, knowing only their email address, because the employee save controller falls back to the literal password "changeme" and the onboarding form provides no password field. |
| CVE-2026-19879 | A flaw was found in Undertow, an HTTP server, within its HTTP response header writing path. The `writeString()` method performs a silent narrowing cast from 16-bit Unicode characters to 8-bit bytes when writing HTTP response header values. A remote attacker can exploit this by supplying specific Unicode characters in user-controlled input that an application places into response headers. This can lead to the truncation of these characters into ASCII control characters or special symbols, potentially resulting in limited integrity impact or information disclosure if the application does not properly sanitize user input. |
| CVE-2026-19880 | Path-traversal vulnerability in QOS.CH Sarl Logback-classic on Java (logback-classic module) allows path-traversal vulnerability. More specifically, an
MDC-based discriminator value flows unsanitized into a nested
FileAppender path, letting an attacker who influences that MDC value
(e.g. via an HTTP header)
create and append log files outside the intended directory.
This issue affects Logback-classic: from 0.9.14 through 1.6.2. |
| CVE-2026-19884 | In Eclipse Theia versions up to and including 1.69.0, opening a folder starts source control integration without requiring the user to trust the folder first. This affects applications built on Theia that include the git integration, such as the Theia IDE. Both Theia's own `@theia/git` extension and the builtin VS Code `git` extension run git commands such as `git status` as soon as a repository is detected. Since git honors repository-local configuration, a folder containing an attacker-controlled `.git/config` with `core.fsmonitor` (or a comparable hook-like setting) causes the configured command to be executed. The configuration can be delivered by burying a bare repository inside a regular repository (OVE-20210718-0001), so cloning an attacker-supplied repository and opening it in a Theia-based application is sufficient to execute arbitrary commands with the privileges of the user, without any confirmation prompt.
As of 1.70.0, plugins that declare `capabilities.untrustedWorkspaces.supported: false`, which includes the builtin git extension, are no longer loaded or activated in an untrusted workspace, and the deprecated `@theia/git` extension has been removed, so no git command is executed against an untrusted folder. |
| CVE-2026-45699 | Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the copydir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. copydir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to track available buffer space using srem and drem for source and destination paths. Incorrect arithmetic causes both srem and drem to underflow to SIZE_MAX. Consequently, boundary checks against strlen(de->d_name) always pass, allowing strcpy() to append filenames into nearly full stack buffers. Version 4.4.3 patches the issue. As a workaround, configure each AFP shared volume to be structured as a single file system, in other words no subdirectory of a shared volume should be a mount point for a different file system. |
| CVE-2026-46380 | compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the HTTPSFetcher._do_fetch() method passes a user-supplied URL directly to requests.get() without validation. This allows an attacker to perform Server-Side Request Forgery, targeting internal services or cloud metadata endpoints. Versions 3.12.2 and 4.0.3 fix the issue. |
| CVE-2026-46439 | compliance-trestle is a tooling platform for managing compliance as code. Versions prior to 3.12.2 and 4.0.3 have a Server-Side Template Injection (SSTI) vulnerability exists in the `trestle author jinja` command. The command recursively evaluates rendered templates, allowing an attacker to achieve arbitrary command execution with privileges of the running process by injecting malicious payloads into data fields (such as SSP documents or Lookup Tables). The vulnerability does not require attacker control of the template itself. Only attacker-controlled input data rendered into a trusted template is required. This distinction is critical: the template author may only intend to render plain text (e.g., `Title: {{ ssp.metadata.title }}`), but because of the recursive parsing, the data field itself becomes executable. The vulnerability is caused by recursive re-compilation and re-rendering of already-rendered output. Versions 3.12.3 and 4.0.3 patch the issue. |
| CVE-2026-47766 | crun is an open source OCI Container Runtime fully written in C. Prior to version 1.28, crun's default device setup opens the container rootfs `/dev` directory without `O_NOFOLLOW`. If an OCI bundle contains `rootfs/dev` as a symlink and the bundle configuration does not mount `/dev`, crun follows that symlink and creates the default device nodes and stdio symlinks at the symlink target outside the container rootfs. In a local rootful crun replay, this created fixed device nodes and symlinks outside the rootfs before crun returned failure. A pre-existing file named `ptmx` in the target directory was also replaced by crun's forced `ptmx -> pts/ptmx` symlink. Version 1.28 fixes the issue. |
| CVE-2026-48528 | Metacat is data repository software that helps researchers preserve, share, and discover data. Metacat versions 2.0.0 through 3.4.0 contain an unauthenticated SQL injection vulnerability in the `/cn/v1/object` and `/cn/v2/object` REST API endpoints due to unsanitized user input that can be passed through to the backend SQL database. The `nodeId` parameter can be modified to inject SQL commands, and the results are returned in error messages. Metacat appends the user-supplied data into the sql query without sanitization or parameterization. This allows extraction of arbitrary data from the underlying PostgresQL database, fully exposing protected information to the attacker. This is accomplished by leveraging the error reporting mechanisms in Metacat, where SQL error responses are mirrored back to the caller in the XML error message returned by Metacat. One approach, for example, is to use the PostgreSQL `CAST` function to generate an error with the results of an arbitrary subquery, which is then injected into the XML error message returned by Metacat. Attackers do not need to be authenticated to execute the attack. In addition, arbitrary SQL statements that insert, update, and delete data in the Metacat database can be executed, resulting in full compromise of all data in the database. Full proof of concept attacks have been developed and verified for these vulnerabilities. The impact of this vulnerability is critical for Metacat deployments in the DataONE network where information from the database can be exfiltrated, added, changed, or deleted. This includes management information about the data catalog, access log information about who accessed data, identifying information about individuals including their ORCID identifier and client IP address, access control information about who should be able to access and modify data, and other critical internals of the data system. This sql injection vulnerability was remediated fully in Metacat version 3.4.1. If upgrading to Metacat 3.4.1 isn't immediately possible, most deployments can mitigate the issue by disabling the `/cn` REST endpoints in the webapp deployment. This API is not needed or used by member repositories in the DataONE network, as it is only used by the DataONE Coordinating Node deployments. Consequently, this API can be disabled without reduction of functionality for most deployments. To disable the vulnerable endpoints, simply remove the servlet and servlet-mapping for the `/cn` endpoints in the servlet engine associated with the two servlets, `edu.ucsb.nceas.metacat.restservice.v1.CNRestServlet` and `edu.ucsb.nceas.metacat.restservice.v2.CNRestServlet`. For example, in Tomcat, remove the relevant `servlet-mapping` elements from the application web.xml file in Metacat. |
| CVE-2026-49282 | Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue. |
| CVE-2026-57469 | Nozomi Networks Labs identified a CWE-352: Cross-Site Request Forgery (CSRF) vulnerability in the web-based configuration backend of KUNBUS PiCtory in version 2.16.0 that allows a remote unauthenticated attacker to perform state-changing operations in the context of an authenticated operator, including deletion of project and configuration files and reset of the control runtime, by inducing the victim's browser to submit crafted requests. |
| CVE-2026-58224 | A flaw was found in Samba's CTDB, the clustered database service used by Samba. Insufficient integrity validation of received CTDB protocol packets allows malformed packets containing invalid field lengths, improperly terminated strings, or inconsistent packet sizes to be processed without adequate bounds checking. A remote attacker with access to the CTDB private network may trigger a denial of service through process crashes or excessive memory consumption and, in limited cases, disclose adjacent memory contents. |
| CVE-2026-63361 | LimeSurvey Community Edition 7.0.5 contains an authenticated reflected cross-site scripting vulnerability in the HTML editor popup endpoint. The text and name query parameters are passed through a blacklist sanitizer and then rendered without context-appropriate output encoding. |
| CVE-2026-63649 | The Windows interactive service in OpenVPN 2.4.0 through 2.6.21 and 2.7_alpha1 through 2.7.5 allows local authenticated users to bypass the trusted configuration directory constraint and load arbitrary configuration files via crafted options that bypass whitelist checks |
| CVE-2026-63700 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Incorrect Default Permission vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. |
| CVE-2026-63701 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Improper Deserialization of Untrusted Data vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. |
| CVE-2026-63702 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain a Use of Hard-coded Credentials vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Unauthorized access. |
| CVE-2026-66270 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| CVE-2026-66271 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. |
| CVE-2026-66272 | Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain a Missing Authentication for Critical Function vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| CVE-2026-69101 | Datavane TIS v5.0.0 contains an XML external entity (XXE) injection vulnerability that allows authenticated attackers to perform server-side request forgery and out-of-band file exfiltration by supplying a crafted taskScript payload to the doEditWorkflow endpoint, which processes XML through an unhardened DocumentBuilderFactory with external entities and DTD loading enabled. Attackers can send a malicious XML document containing an external DTD reference to the edit_workflow action, causing the server to issue outbound HTTP requests to attacker-controlled infrastructure and exfiltrate local files readable by the TIS process user, including configuration files and Derby database credentials. |
| CVE-2026-72813 | actix-files before 0.6.10 contains a denial of service vulnerability triggered by an empty Range header in GET requests for static files. When panic is set to abort, remote attackers can crash the process on-demand by sending a GET request with an empty Range header. |
| CVE-2026-72814 | The actix-files crate (actix_files) before version 0.6.10 contains an information exposure vulnerability. When a non-existing folder is passed as the serve_from argument to Files::new(), the mount path defaults to an empty path; the service then joins the request path with this empty path and canonicalizes it, causing Rust to resolve it as a relative path. As a result, an attacker can request paths that resolve relative to the application's working directory and access unintended files. |
| CVE-2026-72815 | go-chi chi versions >= 5.2.1 and before 5.3.0 contain an IP spoofing vulnerability in the RealIP middleware, which blindly trusts the first (leftmost) value of the X-Forwarded-For HTTP header. A remote attacker can bypass IP-based access control lists and rate-limiting mechanisms, and forge log entries, by supplying a spoofed IP address in the X-Forwarded-For header. The issue is fixed in version 5.3.0. |
| CVE-2026-72817 | go-chi/chi versions 0.9.0 before 5.3.0 contains an IP spoofing vulnerability in the RealIP middleware, which resolves the request source IP (Request.RemoteAddr) using the first IP in the X-Forwarded-For header without validating trusted proxies. A malicious client can prepend a forged IP as the first value of the X-Forwarded-For header to spoof the request source IP, potentially bypassing access controls or falsifying request logs. |
| CVE-2026-72820 | Grav versions before 2.0.13 fail to properly validate backup profile root paths, allowing attackers to archive directories outside GRAV_ROOT when not in the hard-coded deny-list. Attackers with profile editor access can configure backup profiles with traversal paths to expose sensitive files from locations like /opt, /mnt, or /srv. |
| CVE-2026-72821 | Grav Form plugin versions before 9.1.15 contain a stored cross-site scripting vulnerability in radio and toggle field option labels rendered with the Twig |raw filter. Attackers with form authoring permissions can inject HTML and script payloads in option labels that execute in the browsers of visitors and administrators viewing the form. |
| CVE-2026-72822 | The getgrav/grav-plugin-api Composer package before 1.0.13 (affected <= 1.0.12) fails to enforce API key scope caps on the disable2fa endpoint. Unlike the sibling generate2fa endpoint, disable2fa authorizes the admin (non-self) path solely via ACL reads (isSuperAdmin/hasPermission) and never invokes requirePermission(), so the api_key_scopes cap is never applied. As a result, a holder of a narrow-scope API key on a super account, or a non-super account whose ACL includes api.users.write, can force-disable two-factor authentication on any non-super target account via POST /api/v1/users/{user}/2fa/disable without providing a TOTP code, facilitating account takeover. |
| CVE-2026-72823 | The Grav API plugin (getgrav/grav-plugin-api) before 1.0.13 contains an API-key scope cap bypass in DemoController. Its private requireSuper() method checks isSuperAdmin() and returns early before invoking requirePermission(), so the api_key_scopes cap (enforced only in requirePermission()) is skipped. As a result, any scoped API key minted on a super account can bypass its scope restrictions when calling the baseline() and reset() operations (e.g. POST /api/v1/demo/reset), allowing it to capture the demo baseline or force a demo reset. Impact is bounded to demo-engine control and is conditional on demo mode being configured with writable resources. |
| CVE-2026-72826 | The getgrav/grav-plugin-api plugin before 1.0.13 fails to validate that the scopes of a newly created API key are a subset of the caller's scopes in createApiKey. The self-target path of requireApiKeyPermission() requires only the baseline api.access scope, and the new key's scopes are read directly from the request body with no subset check. An attacker holding a minimal-scope API key on a super account can submit an empty scopes array to mint an unscoped, full-access super key, bypassing scope restrictions (and enabling further chains such as configuration write to RCE). |
| CVE-2026-72828 | Grav Plugin API (getgrav/grav-plugin-api) before 1.0.13 fails to enforce API-key scope caps in InvitationsController. The strip-super and accept-groups decisions are gated on a bare isSuperAdmin() check rather than a scope-aware permission check, so a least-privilege API key (scoped to api.users.write) minted on a super account can create an invitation record containing super-admin access flags. When the invitation is accepted, those flags are written verbatim to the new account, resulting in privilege escalation to a fully controlled super account. |
| CVE-2026-72830 | Grav API plugin versions before 1.0.13 fail to enforce API key scope caps in ConfigController super-scope gates, allowing scoped keys to write scheduler configuration. Attackers with a scoped api.config.write key can inject arbitrary commands into scheduler.custom_jobs that execute via Symfony Process for remote code execution. |
| CVE-2026-72831 | The Flex Objects plugin (through 1.4.6, tested with Grav 2.0.11) contains an incorrect authorization vulnerability in its Flex Objects API. FlexApiController::update() checks only the general Flex directory permission and does not apply the additional target/field/super-admin checks enforced by the dedicated Users and Groups API controllers. An authenticated account with api.access, admin.login, and users.update permissions (but without api.users.write or admin.super) can use the generic /api/v1/flex-objects/user-accounts endpoint to change a super administrator's password, or the /api/v1/flex-objects/user-groups endpoint to grant its group admin.super, resulting in full site takeover. Fixed in Flex Objects 1.4.7. |
| CVE-2026-72832 | Grav versions from 1.5.2 through 2.0.12 contain a stored cross-site scripting vulnerability in the Security::detectXss() function (system/src/Grav/Common/Security.php). The event-handler scan is anchored at `<` and uses `[^>]*?`, which cannot cross the first literal `>`; when a `>` appears inside a quoted attribute value the browser keeps the tag open and parses a subsequent event handler (e.g. onerror), so the detector and browser disagree. A page editor without admin.super privileges can save page content such as `<img src=x title=">" onerror=alert(document.domain)>`, which is accepted, stored, and executed in the site origin when any visitor (including unauthenticated users) views the page. Fixed in 2.0.13. |
| CVE-2026-72833 | The Grav API plugin (getgrav/grav-plugin-api) versions >= 1.0.6 and <= 1.0.11 contain a privilege escalation vulnerability. A scoped API key minted on a super-admin account bypasses its declared scope cap on four isSuperAdmin()-gated write endpoints (in GroupsController, AccountsConfigController, PreferencesController, and DashboardWidgetController). These endpoints authorize via a super-admin early-return that never invokes requirePermission()—the sole enforcement point of the scope cap—so a 'read-only'-scoped key (e.g. api.pages.read) can perform super-only write operations, including rewriting group ACL maps to grant super-admin privileges to arbitrary accounts. A leaked or delegated read-only CI/monitoring key can therefore gain full super-admin write capability. Fixed in 1.0.13. |
| CVE-2026-72834 | filebrowser before 2.63.19 contains a permission bypass in the /api/resources endpoint. The checksum (?checksum=) branch of resourceGetHandler reads the entire file to compute a digest and returns it without performing a Perm.Download check (unlike the sibling raw, preview, and subtitle paths). As a result, an authenticated user provisioned with Perm.Download=false can obtain a content-hash oracle for any same-scope file (md5/sha1/sha256/sha512), enabling confirmation of known/guessed content, change detection, and offline brute-force of low-entropy files. This is an incomplete fix of CVE-2026-35606; it bypasses only the Download permission and does not defeat scope/path authorization. |
| CVE-2026-72835 | filebrowser versions before v2.63.21 fail to canonicalize paths before evaluating access rules, allowing authenticated users to bypass administrator-defined deny rules using case-variant or backslash-separated paths. Attackers can request files with alternate path representations that match no rule but resolve to the same filesystem object, gaining unauthorized access to denied files within their scope. |
| CVE-2026-72836 | FileBrowser before 2.63.19 does not account for case-insensitive filesystems when checking home directory ownership during self-registration. When Signup and CreateUserDir are enabled and FileBrowser's root is on a case-insensitive filesystem (confirmed on Windows/NTFS), two self-registered usernames that differ only in letter case (e.g., CaseVictim and casevictim) are stored as distinct accounts but resolve to the same physical home directory, because the scope-ownership check compares the persisted scope as an exact case-sensitive string. A second registrant can therefore read, overwrite, and delete another account's files through authenticated HTTP endpoints, without needing an existing account or victim interaction. |
| CVE-2026-72838 | FileBrowser versions before 2.63.19 fail to enforce the declared Upload-Length in the TUS resumable-upload PATCH endpoint, allowing authenticated users to write arbitrary data to disk. Attackers can send oversized request bodies that exceed the declared upload length to exhaust available disk space and cause service unavailability. |
| CVE-2026-72859 | Budibase versions 3.39.4 before 3.40.0 contain an authorization regression in the S3 attachment upload endpoint that allows BASIC users to obtain S3 PutObject presigned URLs by sending POST requests to the attachments endpoint. The route was changed from a BUILDER permission check to a TABLE/WRITE check, which BASIC users hold by default. Attackers can specify arbitrary S3 buckets in the request body to generate presigned URLs for writing to any bucket accessible by the stored IAM credentials, enabling unauthorized file uploads. |
| CVE-2026-73633 | Uncontrolled resource consumption vulnerability in the JSON plugin of Apache Struts. When an application is configured to populate actions from a JSON request body, the plugin reads that body into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. The plugin's configurable JSON input length limit does not bound this read. The JSON plugin is an optional component; applications that do not use it, or use it without enabling JSON request-body handling, are not affected.
This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| CVE-2026-73673 | Netis NC63 router firmware V3.0.0.3327 contains an unauthenticated firmware update vulnerability that allows unauthenticated attackers to submit unsigned firmware images by exploiting a missing authentication enforcement flaw in the Boa web server and netis.cgi CGI dispatcher. Attackers can send a multipart POST request to /cgi-bin/upload_fw.cgi without a valid session cookie, bypassing authentication because Boa grants access to any path containing '.cgi' regardless of cookie validation, and netis.cgi reads but does not enforce the authentication state before invoking the firmware update handler, which accepts images validated only by a forgeable additive checksum and static product strings rather than a cryptographic signature, potentially enabling persistent router compromise. |
| CVE-2026-73678 | MindsDB Minds Platform version 26.1.0 and earlier contains an unauthenticated remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary OS commands by submitting crafted prompts to the unprotected POST /api/v1/responses/ endpoint, which reaches the Anton agent's scratchpad tool that calls exec() on attacker-influenced Python source without sandboxing. Attackers can first configure their own LLM API key through the unauthenticated PUT /api/v1/settings/ endpoint, then POST a prompt directing the agent to invoke the scratchpad tool with arbitrary Python code, achieving full OS command execution as the user running the desktop application and enabling access to SSH keys, stored credentials, and environment secrets. |
| CVE-2026-73679 | ImpressCMS contains an authenticated remote code execution vulnerability in the custom tag module that allows authenticated administrators to execute arbitrary PHP code by storing a malicious payload in a custom tag with PHP type enabled. The application decodes HTML-encoded content via undoHtmlSpecialChars() before passing it to eval() in the renderWithPhp() method, bypassing HTML Purifier sanitization, and the payload is triggered on every frontend page load through the preload event system. |
| CVE-2026-73850 | Emlog is an open source website building system. In 2.6.20 and earlier, there is a SQL injection vulnerability in the queryDatabase function in ai.php. |
| CVE-2026-18549 | @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| CVE-2026-19474 | @fastify/multipart is a multipart form-data parser for Fastify. In versions from 3.0.0 up to but not including 10.1.1, request.saveRequestFiles() can leave completed temporary files on disk when a client disconnects while the parser is advancing between multipart parts. The iterator rejection that occurs between parts falls outside the per-file cleanup path, so an earlier completed file is never removed. An unauthenticated client can repeat this to cause persistent, linear disk consumption, leading to denial of service. This is an incomplete-fix variant of CVE-2025-24033. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| CVE-2026-73631 | Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-request parsing state could be shared across concurrent requests, allowing data associated with one request to become observable in another, and configured parsing limits not to be enforced as intended. Populating actions from a JSON request body is not enabled by default; applications that do not use the JSON plugin are not affected.
This issue affects Apache Struts: 7.2.1.
Users are recommended to upgrade to version 7.3.0, which fixes the issue. |
| CVE-2026-73632 | Exposure of data element to wrong session vulnerability in the JSON plugin of Apache Struts. Per-response serialization state could be shared across concurrent requests, allowing response content associated with one request to become observable in another. Only the SMD / JSON-RPC handling of the JSON interceptor is affected, which is not enabled by default; applications using the json result type are not affected.
This issue affects Apache Struts: 7.2.1.
Users are recommended to upgrade to version 7.3.0, which fixes the issue. |
| CVE-2026-73634 | Uncontrolled resource consumption vulnerability in Apache Struts. An application that exposes an endpoint collecting Content Security Policy violation reports reads the submitted report into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. Such endpoints are ordinarily reachable without authentication. The core distribution maps no such endpoint by default; applications that do not collect violation reports are not affected.
This issue affects Apache Struts: from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| CVE-2026-73635 | Allocation of resources without limits or throttling vulnerability in Apache Struts. When no fixed locale is configured, the locale used for localized-text lookups is taken from the incoming request, allowing an unauthenticated remote client to cause the framework's internal localized-text caches to grow without bound and exhaust the Java heap, denying service to other users. Applications that configure a fixed locale are not affected.
This issue affects Apache Struts: from 2.0.0 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1.
Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue. |
| CVE-2026-74764 | Pandora contains a path traversal vulnerability in its TAR archive extraction functionality. When processing a submitted TAR archive, the extractor passed archive member names directly to Python's tarfile.TarFile.extract() without applying an extraction filter.
An attacker able to submit a specially crafted TAR archive containing malicious member paths, such as paths using ../ sequences or absolute paths, could cause extracted files to be written outside the intended extraction directory. This may allow the attacker to overwrite files accessible to the Pandora worker process and could potentially result in application compromise, arbitrary code execution, or denial of service depending on the files targeted and the privileges of the Pandora process.
The vulnerability is corrected by using Python's filter='data' extraction filter, which rejects or sanitizes dangerous TAR members, including paths that escape the destination directory and unsafe link targets.
The weakness corresponds to MITRE's general path traversal category, which includes archive extraction cases where attacker-controlled filenames cause files to be written outside the intended directory. |
| CVE-2026-74767 | Pandora contains a denial-of-service vulnerability in its handling of DAA (Direct Access Archive) files. When extracting the internal ISO image from a DAA archive, compressed chunks were decompressed using zlib.decompress() without enforcing a limit on the resulting uncompressed data.
An attacker able to submit a crafted DAA file containing highly compressed data could cause Pandora to decompress a relatively small input into a very large amount of data in memory. Because the decompressed chunks are accumulated to construct the internal ISO image, this could result in excessive memory consumption and potentially CPU exhaustion, causing the extraction worker to become unresponsive, terminate, or affect the availability of the Pandora service.
The patch introduces bounded decompression using decompressobj().decompress() with max_extracted_filesize, verifies the cumulative size of decompressed chunks, and raises a dedicated ZipBomb exception when the configured limit is exceeded. Pandora then aborts extraction and reports the file as too large. |
| CVE-2026-19926 | A vulnerability has been found in Evergreen up to 3.14.11/3.15.11/3.16.5/3.17-beta1. The affected element is an unknown function of the file /osrf-gateway-v1 of the component open-ils.fielder OpenSRF Service. Such manipulation leads to sql injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.14.12, 3.15.12, 3.16.6 and 3.17-beta2 is sufficient to fix this issue. The affected component should be upgraded. |
| CVE-2026-19927 | A vulnerability was found in OpenBoxes up to 0.9.7. The impacted element is the function Upload of the file grails-app/controllers/org/pih/warehouse/product/ProductController.groovy of the component Product Upload Endpoint. Performing a manipulation of the argument params.url results in server-side request forgery. The attack is possible to be carried out remotely. The exploit has been made public and could be used. Upgrading to version 0.9.8-hotfix1 and 0.9.8 is sufficient to resolve this issue. The patch is named a599007325efe780a21b3537ecce3ca25635c926. It is suggested to upgrade the affected component. |
| CVE-2026-19928 | A vulnerability was determined in OpenBoxes up to 0.9.7. This affects the function needManager of the file grails-app/controllers/org/pih/warehouse/RoleInterceptor.groovy of the component Role Interceptor. Executing a manipulation can lead to improper privilege management. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. Upgrading to version 0.9.8-hotfix1 and 0.9.8 mitigates this issue. This patch is called 788cace0af816aa972a713a4631c57f16f895e6b. Upgrading the affected component is recommended. |
| CVE-2026-19929 | A vulnerability was identified in OpenBoxes up to 0.9.6. This impacts the function buildZebraTemplate of the file grails-app/controllers/org/pih/warehouse/core/DocumentController.groovy of the component Template Processing. The manipulation leads to improper neutralization of special elements used in a template engine. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. Upgrading to version 0.9.8-hotfix1 and 0.9.8 will fix this issue. The identifier of the patch is deeac6a4a7aba86ce99c4bda37142e41d209293e. It is recommended to upgrade the affected component. |
| CVE-2026-19932 | A security flaw has been discovered in DefaultFuction Notice-System-Managent 2.0. This issue affects the function GroovyShell.evaluate of the file /execute of the component NoticeController. The manipulation results in code injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project confirms, that "it’s being processed". |
| CVE-2026-19933 | A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". |
| CVE-2026-74783 | Scriban versions 6.6.0 through 7.2.0 contain a non-enforcing ExpressionDepthLimit guard that fails to stop recursive descent parsing of deeply nested expressions. Attackers can supply templates with deeply nested parentheses, array initializers, object initializers, or unary operators to trigger an uncatchable StackOverflowException that immediately terminates the host process. |
| CVE-2026-74784 | Scriban before 7.2.0 contains a denial of service vulnerability in the array.insert_at function that allocates unbounded null entries without respecting LoopLimit or LimitToString constraints. Attackers can supply a large index parameter to trigger OutOfMemoryException and crash the host process in under a second. |
| CVE-2026-74785 | Scriban before 7.0.0 contains three distinct denial-of-service vulnerabilities in expression evaluation that bypass existing safety controls through unbounded string multiplication, uncontrolled BigInteger shift operations, and LoopLimit bypass via range enumeration in builtin functions. Attackers who can supply templates can cause out-of-memory exceptions or CPU exhaustion, typically terminating the entire host process. |
| CVE-2026-74786 | Scriban before 7.0.0 (affected versions <= 6.6.0) contains a denial-of-service vulnerability in which the LimitToString safety limit (default 1MB) can be bypassed because ObjectToString resets the per-call length counter (_currentToStringLength) on every top-level call and StringBuilderOutput enforces no cumulative output-size limit. An attacker who can supply a template can render a near-limit string repeatedly in a loop, allocating approximately 1GB of memory and causing an out-of-memory condition that crashes the host application. |
| CVE-2026-74787 | Scriban before 7.0.0 contains an uncontrolled recursion vulnerability in the object.to_json builtin function that lacks depth limits and circular reference detection. Attackers can craft templates with self-referencing objects to trigger unbounded recursion, causing a StackOverflowException that fatally terminates the hosting .NET process. |
| CVE-2026-74788 | Scriban before 7.0.0 (affected versions <= 6.6.0) contains an uncontrolled memory allocation vulnerability in the string.pad_left and string.pad_right template functions, which perform no validation on the width parameter before delegating to .NET's String.PadLeft/PadRight. When an application exposes Scriban to untrusted template input, an attacker can supply an arbitrarily large width value (e.g., 500,000,000) to trigger ~1GB memory allocations in a single call, resulting in OutOfMemoryException and denial of service. The TemplateContext.LimitToString limit does not prevent this because it is only enforced after the string has been fully allocated. |
| CVE-2026-74789 | Scriban before 7.0.0 (affected <= 6.6.0) applies its LoopLimit constraint only to script loop statements and not to expensive iteration performed inside built-in operators and functions. As a result, a single expression such as {{ 1..1000000 | array.size }} — or a memory-amplification expression such as {{ 'A' * 200000000 }} — can force large CPU or memory consumption even when LoopLimit is configured to a very small value, resulting in denial of service. Applications that render attacker-controlled templates and rely on LoopLimit for safe execution are affected. |
| CVE-2026-74790 | Scriban before 7.0.0 caches TypedObjectAccessor by Type only without considering MemberFilter changes, allowing reused TemplateContext instances to expose members that should be hidden. Attackers can access filtered properties and fields by reusing a TemplateContext after tightening its MemberFilter, bypassing sandbox policies across requests or tenants. |
| CVE-2026-74791 | Scriban before 7.0.0 fails to clear the CachedTemplates dictionary when TemplateContext.Reset() is called, allowing cached templates to persist across reused contexts. Attackers can exploit request-dependent ITemplateLoader implementations to access previously authorized template content from earlier renders without triggering TemplateLoader.Load() again. |
| CVE-2026-74792 | Scriban before 7.0.0 (affected versions <= 6.6.0) contains a stack overflow vulnerability in nested array initializer parsing. Deeply nested array initializers recurse through a path (ParseArrayInitializer → ParseExpression → ParseArrayInitializer) that is not covered by the ExpressionDepthLimit counter added in the fix for GHSA-wgh7-7m3c-fx25. An attacker who can supply untrusted input to Template.Parse can trigger an uncatchable StackOverflowException that immediately terminates the process, even with the default ExpressionDepthLimit enabled. |
| CVE-2026-74794 | Scriban before 6.6.0 contains an infinite recursion vulnerability in object rendering when the ObjectRecursionLimit property defaults to unlimited. Attackers can supply circular reference objects to the template context, exhausting stack space and triggering an uncatchable StackOverflowException that terminates the hosting process. |
| CVE-2026-74795 | Scriban before 6.6.0 contains an uncontrolled recursion vulnerability in its recursive-descent parser. The parser does not enforce a default expression depth limit (the ExpressionDepthLimit property in ParserOptions defaults to null/disabled), so an attacker who controls template input can supply a deeply nested template (e.g., thousands of nested parentheses or blocks) that exhausts thread stack space and raises a StackOverflowException. Because a StackOverflowException cannot be caught in .NET, this causes immediate, unrecoverable termination of the hosting process, resulting in a denial of service. Applications that process untrusted or user-supplied templates can be exploited remotely without authentication. |
| CVE-2026-74796 | OpenTofu before 1.11.7 fails to validate existing symlinks in the provider cache directory during initialization. Attackers can place a malicious symlink in a trusted working directory to cause tofu init to write provider package contents to arbitrary filesystem locations outside the working tree. |
| CVE-2026-74797 | OpenTofu versions before 1.11.4 contain a denial of service vulnerability in the tofu init command when processing maliciously-crafted .zip archives for provider or module packages. Attackers can cause excessive CPU usage by controlling .zip archive content served during dependency installation, degrading system performance and preventing timely completion of the init process. |